Abstract:Syngas conversion is a key platform for efficient utilization of various carbon-containing resources including coal, natural gas, biomass, organic wastes, and even CO2. One of the most classic routes for syngas conversion is Fischer-Tropsch synthesis (FTS), which is already available for commercial application. However, it still remains a grand challenge to tune the product distribution from paraffins to value-added chemicals such as olefins and higher alcohols. Breaking the selectivity limitation of the Anderson-Schulz-Flory (ASF) distribution has been one of the hottest topics in syngas chemistry.Metallic Co0 is a well-known active phase for Co-catalyzed FTS, and the products are dominated by paraffins with a small amount of chemicals (i.e., olefins or alcohols). Specifically, a cobalt carbide (Co2C) phase is typically viewed as an undesirable compound that could lead to deactivation with low activity and high methane selectivity. Although iron carbide (FexC) can produce olefins with selectivity up to ∼60%, the fraction of methane is still rather high, and the required high reaction temperature (300-350 °C) typically causes coke deposition and fast deactivation. Recently, we discovered that Co2C nanoprisms with preferentially exposed facets of (020) and (101) can effectively produce olefins from syngas conversion under mild reaction conditions with high selectivity. The methane fraction was limited within 5%, and the product distribution deviated greatly from ASF statistic law. The catalytic performances of Co2C nanoprisms are completely different from that reported for the traditional FT process, exhibiting promising potential industrial application.This Account summarizes our progress in the development of Co2C nanoprisms for Fischer-Tropsch synthesis to olefins (FTO) with remarkable efficiencies and stability. The underlying mechanism for the observed unique catalytic behaviors was extensively explored by combining DFT calculation, kinetic measurements, and various spectroscopic and microscopic investigation. We also emphasize the following issues: particle size effect of Co2C, the promotional effect of alkali and Mn promoters, and the role of metal-support interaction (SMI) in fabricating supported Co2C nanoprisms. Specially, we briefly review the synthetic methods for different Co2C nanostructures. In addition, Co2C can also be applied as a nondissociative adsorption center for higher alcohol synthesis (HAS) via syngas conversion. We also discuss the construction of a Co0/Co2C interfacial catalyst for HAS and demonstrate how to tune the reaction network and strengthen CO nondissociative adsorption ability for efficient production of higher alcohols. We believe that the advances in the development of Co2C nanocatalysts described here present a critic step to produce chemicals through the FTS process.

Coke-promoted Ni/CaO catal-sorbents in the production of cyclic CO and syngas

Ni-CaO Dual Function Materials Prepared by Different Synthetic Modes for Integrated CO2 Capture and Conversion

A fundamental study of CO2 capture and CH4 production in a rapid cyclic system using nickel-lithium-silicate as a catal-sorbent

Two birds with one stone: MgO promoted Ni-CaO as stable and coke-resistant bifunctional materials for integrated CO 2 capture and conversion

Alkaline-promoted Co-Ni Bimetal Ordered Mesoporous Catalysts with Enhanced Coke-Resistant Performance Toward CO 2 Reforming of CH 4

Synergistic promotions between CO2 capture and in-situ conversion on Ni-CaO composite catalyst

Production of Syngas Via Partial Oxidation and CO2Reforming of Coke Oven Gas over a Ni Catalyst

Recent Progresses on Some Coke Resistant Ni-Based Catalysts for Carbon Dioxide Reforming of Methane

Tuning Single Atom-Nanoparticle Ratios of Ni-based Catalysts for Synthesis Gas Production from CO2

Cobalt Supported Nickel Silicate Nanotubes for Efficient CO2 Methanation

A Ni–N–C catalyst for CO2 electroreduction based on the MOF@MOF configuration exhibiting wide active reaction sites

Design of Mg-Ni binary single-atom catalysts for conversion of carbon dioxide to syngas with a wide tunable ratio: Each species doing its own job or working together to win?

A Novel Ni–MoCxOy Interfacial Catalyst for Syngas Production Via the Chemical Looping Dry Reforming of Methane

Highly stable FeNiMnCaO catalyst for integrated CO2 capture and hydrogenation to CO

Nanoparticle-Assisted Ni–Co Binary Single-Atom Catalysts Supported on Carbon Nanotubes for Efficient Electroreduction of CO 2 to Syngas with Controllable CO/H 2 Ratios

Novel CaO-SiO2 sorbent and bifunctional Ni/Co-CaO/SiO2 complex for selective H2 synthesis from cellulose.

Production of Synthesis Gas Via Methane Reforming with Co2 on Ni/Sio2 Catalysts Promoted by Alkali and Alkaline Earth Metals

Cobalt Carbide Nanocatalysts for Efficient Syngas Conversion to Value-Added Chemicals with High Selectivity

Electrochemical Conversion of CO<sub>2</sub> to Syngas with Controllable CO/H<sub>2</sub> Ratios over Co and Ni Single-Atom Catalysts

Enhancement of hollow Ni/CeO2-Co3O4 for CO2 methanation: From CO2 adsorption and activation by synergistic effects

Optimizing CO2 methanation: effect of surface basicity and active phase reducibility on Ni-based catalysts