Abstract:Microporous and mesoporous activated carbon produced from longan-seed biomass were impregnated with NaOH and used to capture CO 2 from a simulated flue gas in a fixed-bed column. The process variables that were studied included types of activated carbon as characterized by the volume ratio of micropores and mesopores (V mic /V mes ), adsorption temperature, NaOH loading, gas feed rate and the adsorbent amount. All five process variables affected the two important breakthrough parameters, namely the breakthrough time (t B ) and CO 2 adsorption capacity at breakthrough time (q B ), with different trends and degrees. However, it was only the NaOH loading that showed a characteristic of an optimum loading that provided the maximum of the breakthrough parameters. It was found that an approximate 45% increase in the adsorbed amount of CO 2 could be achieved with the activated carbon impregnated with around 1 weight % NaOH solution as compared to the case of the non-impregnated carbon. The response surface methodology (RSM) was applied to develop the correlations for both t B and q B and the maximum predicted q B of 33.58 mg/g was derived at the NaOH loading of 76.5 mg/g carbon, V mic /V mes of 2.83, adsorption temperature of 20°C, gas feed rate of 156 kg/m 2 -h and adsorbent amount of 51 kg/m 2 of column cross-section area. The Klinkenberg's breakthrough model was able to describe the CO 2 breakthrough curves reasonably well for all the tested conditions. The analysis of the two model parameters, the affinity constant (K) and the effective pore diffusivity (D e ), revealed that the optimum V mic /V mes that provided the maximum K value was around 2.90, corresponding to the activated carbon that contains 74% and 26% by volume of micropores and mesopores, respectively. The proper volume ratio of micropores and mesopores along with alkali addition into activated carbon can be effectively used for maximizing CO 2 adsorption in a fixed-bed adsorption system.

CO2 Adsorption on Activated Carbons Prepared from Molasses: A Comparison of Two and Three Parametric Models

Modified Kinetics Model of Nano CaO Reactions with CO2 in a CaO-Based Adsorbent

Carbon Dioxide Adsorption over Activated Carbons Produced from Molasses Using H2SO4, H3PO4, HCl, NaOH, and KOH as Activating Agents

Adsorption of Nitrous Oxide on Activated Carbons

Adsorption of propylene and ethylene on 15 activated carbons

Freundlich, Langmuir, Temkin, DR and Harkins-Jura Isotherm Studies on the Adsorption of CO2 on Various Porous Adsorbents

Experimental, RSM modelling, and DFT simulation of CO2 adsorption on Modified activated carbon with LiOH

Monte Carlo simulation of carbon monoxide, carbon dioxide and methane adsorption on activated carbon

Adsorption of Carbon Dioxide on Activated Carbon

Kinetic and mechanistic study of CO 2 adsorption on activated hydrochars

Carbon Dioxide Adsorption over Activated Biocarbons Derived from Lemon Peel

Superior CO2 Adsorption on Pine Nut Shell-Derived Activated Carbons and the Effective Micropores at Different Temperatures

Experiment and Kinetic Model Study on Modified Potassium-Based CO2 Adsorbent

Evaluation of adsorption efficiency of activated carbon functionalized with methyl diethanolamine in carbon dioxide gas

The synergistic effect of oxygen-containing functional groups on CO2 adsorption by the glucose-potassium citrate-derived activated carbon

Dynamic of CO2 adsorption in a fixed bed of microporous and mesoporous activated carbon impregnated with sodium hydroxide and the application of response surface methodology (RSM) for determining optimal adsorption conditions

Thermodynamics and Regeneration Studies of CO2 Adsorption on Activated Carbon

CO2 Adsorption Performance of Activated Coke Prepared from Biomass and Coal

Carbon Dioxide Adsorption by a High-Surface-Area Activated Charcoal

Comprehensive Studies of Adsorption Equilibrium and Kinetics for Selected Aromatic Organic Compounds on Activated Carbon

ADSORPTION MODELS FOR MIXED GASES OF CS_2 AND CO_2 ON ACTIVATED CARBON