Abstract:In this study, synthetic CaCO 3 materials were utilized as precursors for CaO-based CO 2 sorbents. The investigation examined how various operating parameters—such as synthesis temperature (ST), stirring rate (SR), and surfactant percentage (SP)—impact the properties of the adsorbents. Samples were firstly characterized by X-ray diffraction and Scanning Electron Microscopy (SEM), which revealed that the prevalence of calcite or aragonite crystal phases in the synthetic CaCO 3 precursors can be tuned by adequately choosing the dose of surfactant (Triton-X100®), so that it can be used as a crystal habit and growth modifier. The calcination process applied to the CaCO 3 precursors leads to the formation of partially sinterized cubic crystals of CaO, accompanied by minor quantities (< 5 %) of additional compounds like Ca(OH) 2 or CaSO 4 . Specific surface area (S BET ) and porosity were determined by measuring the N 2 adsorption isotherms. A CaCO 3 sample with an unprecedented value of S BET as large as 116 m 2 /g was prepared operating under optimal conditions. S BET and pore volumes were successfully correlated with the CO 2 uptake capacity of the samples. S BET is more influential for experiments carried out under diluted CO 2 atmosphere. When pure CO 2 is used, the influence of meso- and micropore volumes (V me and V mi ) is clearly predominant, which suggests that in this latter case diffusion through the porous texture of the samples plays a more remarkable role. A double-way approach through Response Surface Methodology (RSM) and the use of Artificial Neural Networks (ANNs) has been used to analyze the CO 2 uptake capacity of the samples. Within the operational interval, excellent results were obtained for pure and diluted CO 2 flow, and RSM and ANNs have demonstrated to be a very efficient tool to correlate the behavior of the CaO-based materials as CO 2 sorbents with the surface area and pore volumes of the samples. Valuable information on (i) the importance of the different factors under study; (ii) their influence on the surface and porosity of the CaO-derived sorbents; and (iii) the subsequent CO 2 capture performance of the sorbents has been obtained. The results suggest that four parameters have a statistically significant influence on CO 2 uptake. These parameters are SR, the square of SR, its interaction with SP, and the square of SP. Additionally, the study assessed the stability of the CaO-based sorbents over 11 consecutive calcination-carbonation cycles. By adequately choosing the synthesis strategy and conditions, an almost negligible shrinkage effect can be achieved, resulting in a more sustained uptake capacity throughout the cycles.

Dynamic of CO2 adsorption in a fixed bed of microporous and mesoporous activated carbon impregnated with sodium hydroxide and the application of response surface methodology (RSM) for determining optimal adsorption conditions

Optimal Activation of Porous Carbon for High Performance CO2 Capture

Modified Kinetics Model of Nano CaO Reactions with CO2 in a CaO-Based Adsorbent

Experimental Study of Breakthrough Adsorption on Activated Carbon for CO2 Capture

Carbon Dioxide Adsorption over Activated Carbons Produced from Molasses Using H2SO4, H3PO4, HCl, NaOH, and KOH as Activating Agents

Superior CO2 Adsorption on Pine Nut Shell-Derived Activated Carbons and the Effective Micropores at Different Temperatures

Exploring the role of surface and porosity in CO 2 capture by CaO-based adsorbents through response surface methodology (RSM) and artificial neural networks (ANN)

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon

Freundlich, Langmuir, Temkin, DR and Harkins-Jura Isotherm Studies on the Adsorption of CO2 on Various Porous Adsorbents

Adsorption-absorption technique for effective CO2 capture

Experiment and Kinetic Model Study on Modified Potassium-Based CO2 Adsorbent

Experimental, RSM modelling, and DFT simulation of CO2 adsorption on Modified activated carbon with LiOH

Carbon Dioxide Adsorption over Activated Biocarbons Derived from Lemon Peel

Adsorption of Carbon Dioxide on Activated Carbon

Activated carbon-based CO2 uptake evaluation at different temperatures: The correlation analysis and coupling effects of the preparation conditions

Tuning porosity of coal-derived activated carbons for CO2 adsorption

Preparation of microporous carbonaceous CO2 adsorbents by activating bamboo shoot shells with different chlorides: Experimental and theoretical calculations

CO2 Adsorption Performance of Activated Coke Prepared from Biomass and Coal

Carbon Dioxide Adsorption by a High-Surface-Area Activated Charcoal