Abstract:The paper is aimed to present its methods for preparing four kinds of modified activated carbons under the different temperature conditions to protect the nitrogen atmosphere.For the research purpose,we have examined their surface physicochemical properties in a variety of approaches,such as the application of a gas adsorption analyzer,a Boehm titration,a scanning electronmicroscope (SEM) and the Fourier trans tormed infrared spectroscopy (FTIR).At the same time,we have also done the isothermal adsorption experiments under the conditions with carbaryl being used as the adsorbate.Besides,this paper has also made an exploration of the associated relation between the adsorption power and the physicochemical properties of the activated carbons.The results of the above experimental studies show that the thermal treatment of the activated carbon is in a position to change the physicochemical properties of its surface.For instance,it can promote the decrease of the oxygen content of the carbon surface and the acidic functional groups whereas the surface area and the basic composition of the activated carbons can help to increase themselves significantly,too.Moreover,the SEM analysis indicates that the pore number and volume can be found increased due to the activated carbons expansion with the rising of the temperature.What is more,the analysis results of FTIR experiment prove to be consistent with the results of the Boehm titration.In addition,the adsorption capacity of the activated carbons has been found strongly correlated with their surface area,pore volume,and the surface acidic functional groups while the oxygen content of the surface area and pore volume can help to improve the adsorption capacity of the activated carbons.On the contrary,the acidic functional groups and the oxygen content just behave oppositely.More exactly speaking,the experimental data indicate that the optimal modification temperature should be set up at 600℃.The adsorption behavior of the activated carbons has also been found consistent with the pseudo-second-order kinetic model and that of the Langmuir isotherm.And,finally,the adsorption capacity of all kinds of adsorbents proves to be greater than 8 kJ/mol,signifying that the adsorption process has been dominated by the chemical adsorption.The fitting data of the intraparticle diffusion reveals that the adsorption rate of the activated carbons is not rn()erely controlled in the liquid film diffusion stage.

Adsorption of Nitrous Oxide on Activated Carbons

Adsorption of propylene and ethylene on 15 activated carbons

Adsorption of Nitrogen Dioxide on Nitrogen-Enriched Activated Carbons

Adsorption Characteristics Of Nitrobenzene Onto Powdered Activated Carbon

CO2adsorption on Crab Shell Derived Activated Carbons: Contribution of Micropores and Nitrogen-Containing Groups

Mechanism of O2-Promoted No Adsorption on Activated Carbon: an Experimental and Computational Study

Adsorption Equilibrium, Thermodynamic, and Kinetic Study of O2/N2/CO2 on Functionalized Granular Activated Carbon

Effect of Nitrogen Doping on the Reduction of Nitric Oxide with Activated Carbon in the Presence of Oxygen

Equilibrium, Kinetic and Thermodynamic Studies on the Adsorption of 2-Nitroaniline Onto Activated Carbon Prepared from Cotton Stalk Fibre.

Nitrogen Doping of Activated Carbon Loading Fe2O3 and Activity in Carbon-Nitric Oxide Reaction

Experimental Study on Dynamic Adsorption of NO2 over Activated Carbon

Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A

CO2 adsorption on chemically modified activated carbon

The effects of nitrogen functional groups and narrow micropore sizes on CO2 adsorption onto N-doped biomass-based porous carbon under different pressure

Exploring the Micropore Functional Mechanism of N2O Adsorption by the Eucalyptus Bark-based Porous Carbon

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Pure methane, carbon dioxide, and nitrogen adsorption on anthracite from China over a wide range of pressures and temperatures: experiments and modeling

Adsorption Equilibrium and Diffusion of CH4, CO2, and N2 in Coal-Based Activated Carbon

On the adsorptive performance of carbaryl onto the activated carbons with the thermal treatment

Adsorption kinetics of CO2, CO, N2 and CH4 on zeolite LiX pellet and activated carbon granule

Tailoring Nitrogen‐Doped Activated Carbons: Central Composite Design for Enhanced CO2 Adsorption