Abstract:Flexible microcomb printing (FMCP) is introduced to fabricate PbS quantum dot (QD) photoconductors using a direct PbS QD ink without layer‐by‐layer ligand exchange. A high shear rate at the tips of the microcomb leads to better crystallization configuration of the QD film. FMCP‐printed photodetectors show high responsivities. This facile method is promising for scalable high‐performance PbS QD photodetectors. Colloidal PbS quantum dots (QDs) have attracted tremendous attention in near‐infrared photodetection for their superior optoelectronic properties. However, appropriate fabrication methods remain a challenge for scalable and high performance PbS QD photodetectors. Herein, a flexible microcomb printing (FMCP) technique is first introduced to fabricate PbS QD photoconductors without a layer‐by‐layer ligand exchange technique, and the detectors demonstrate a responsivity of 2.1 A W−1. A computational fluid dynamics model is built to simulate the flow field distribution and analyze the relationship between the key parameters of FMCP and QD film morphology. The QD ink flow field at the tip of the microcomb exhibits high shear rates that lead to a better crystallization configuration for solid QD films formation, which is verified by Grazing‐incidence small and wide‐angle X‐ray scattering. Moreover, the relationship between the intrinsic nature of the QD ink (viscosity and surface tension), substrate temperature, and printing speed are systematically analyzed to experimentally achieve high performance QD films. Benefiting from the good crystallization configuration, FMCP‐printed photodetectors using the direct PbS QD ink without ligand exchange show high responsivities. The results indicate that FMCP is a promising method for scalable and high‐performance PbS QD photodetectors.

Flexible lead sulfide colloidal quantum dot photodetector using pencil graphite electrodes on paper substrates

Flexible Microcomb Printed PbS Quantum Dot Film Enables Scalable Fabrication of Near Infrared Photodetector

High-performance flexible and broadband photodetectors based on PbS quantum dots/ZnO nanoparticles heterostructure

Two-dimensional Bi2Se3 nanosheet based flexible infrared photodetector with pencil-drawn graphite electrodes on paper

Electrode Engineering of Colloidal Quantum Dot Photodetectors Using a Self-Assembled Island-like LiF Interfacial Layer

Colloidal PbS Quantum Dot Photodiode Imager with Suppressed Dark Current

Flexible self-powered photoelectrochemical-type photodetector based on 2D WS2-graphene heterojunction

Spray-deposited PbS colloidal quantum dot solid for near-infrared photodetectors

Highly-Responsive Broadband Photodetector Based on Graphene-PTAA-SnS2 Hybrid

Spray-Coated Graphene/Quantum Dots Paper-Based Photodetectors

High-Performance Near-Infrared Photodetector Based on PbS Colloidal Quantum Dots/ZnO-Nanowires Hybrid Nanostructures

Field-effect transistor-based solution-processed colloidal quantum dot photodetector with broad bandwidth into near-infrared region

Flexible photodetector based on Graphite/ZnO–WS2 nanohybrids on paper

Ambient-Stable and High On/Off Ratio Near-Infrared Photodetector Based on Perovskite-Treated PbS Colloidal Quantum Dots

On the mechanism to suppress dark current via blending all-inorganic pervoskite precursor for colloidal quantum dots photodetectors

Nano-Oxide-Assisted Si/PbS CQD Heterojunction Photodetectors for Broadband Sensing

Ternary Pb1-xCdxS Quantum Dot-Based UV-vis-NIR Photoelectrochemical Photodetection with Superior Photoresponsivity and Detectivity

Significant Enhancement of Single-Walled Carbon Nanotube Based Infrared Photodetector Using PbS Quantum Dots

Perovskite quantum dots embedded paper photodetectors with high flexibility and self-powered operation

Flexible, Printable Soft‐X‐Ray Detectors Based on All‐Inorganic Perovskite Quantum Dots

Porous Single-Wall Carbon Nanotube Templates Decorated with All-inorganic Perovskite Nanocrystals for Ultraflexible Photodetectors