Abstract:Flexible microcomb printing (FMCP) is introduced to fabricate PbS quantum dot (QD) photoconductors using a direct PbS QD ink without layer‐by‐layer ligand exchange. A high shear rate at the tips of the microcomb leads to better crystallization configuration of the QD film. FMCP‐printed photodetectors show high responsivities. This facile method is promising for scalable high‐performance PbS QD photodetectors. Colloidal PbS quantum dots (QDs) have attracted tremendous attention in near‐infrared photodetection for their superior optoelectronic properties. However, appropriate fabrication methods remain a challenge for scalable and high performance PbS QD photodetectors. Herein, a flexible microcomb printing (FMCP) technique is first introduced to fabricate PbS QD photoconductors without a layer‐by‐layer ligand exchange technique, and the detectors demonstrate a responsivity of 2.1 A W−1. A computational fluid dynamics model is built to simulate the flow field distribution and analyze the relationship between the key parameters of FMCP and QD film morphology. The QD ink flow field at the tip of the microcomb exhibits high shear rates that lead to a better crystallization configuration for solid QD films formation, which is verified by Grazing‐incidence small and wide‐angle X‐ray scattering. Moreover, the relationship between the intrinsic nature of the QD ink (viscosity and surface tension), substrate temperature, and printing speed are systematically analyzed to experimentally achieve high performance QD films. Benefiting from the good crystallization configuration, FMCP‐printed photodetectors using the direct PbS QD ink without ligand exchange show high responsivities. The results indicate that FMCP is a promising method for scalable and high‐performance PbS QD photodetectors.

Spray-deposited PbS colloidal quantum dot solid for near-infrared photodetectors

Size-controllable fabrication of PbS quantum dots for NIR–SWIR photodetectors with extended wavelengths

Colloidal PbS Quantum Dot Photodiode Imager with Suppressed Dark Current

Size-tunable and monodisperse lead sulfide quantum dots for broadband photodetectors

High-Performance Near-Infrared Photodetector Based on PbS Colloidal Quantum Dots/ZnO-Nanowires Hybrid Nanostructures

PbS Colloidal Quantum Dot Photodetectors operating in the near infrared

Size tunable and controllable synthesis of PbS quantum dots for broadband photoelectric response

Electrode Engineering of Colloidal Quantum Dot Photodetectors Using a Self-Assembled Island-like LiF Interfacial Layer

Nano-Oxide-Assisted Si/PbS CQD Heterojunction Photodetectors for Broadband Sensing

On the mechanism to suppress dark current via blending all-inorganic pervoskite precursor for colloidal quantum dots photodetectors

Ambient-Stable and High On/Off Ratio Near-Infrared Photodetector Based on Perovskite-Treated PbS Colloidal Quantum Dots

Silicon-based PbS-CQDs infrared photodetector with high sensitivity and fast response

Flexible Microcomb Printed PbS Quantum Dot Film Enables Scalable Fabrication of Near Infrared Photodetector

Passivating {100} Facets of PbS Colloidal Quantum Dots via Perovskite Bridges for Sensitive and Stable Infrared Photodiodes

Mid-infrared response of PbS colloidal quantum dot solids

Organic Amine-Bridged Quasi-2D Perovskite/PbS Colloidal Quantum Dots Composites for High-Gain Near-Infrared Photodetectors

Tutorial: Lead sulfide colloidal quantum dot infrared photodetector

Optimization of Charge Carrier Extraction in Colloidal Quantum Dots Short‐Wave Infrared Photodiodes through Optical Engineering

Ternary Pb1-xCdxS Quantum Dot-Based UV-vis-NIR Photoelectrochemical Photodetection with Superior Photoresponsivity and Detectivity

Fabrication of lead telluride quantum dots and their application in photoelectrochemical-type photodetectors

High-Radiance Shortwave Infrared Light-Emitting Diodes Based on Highly Stable PbS Colloidal Quantum Dots