Abstract:The development of AlGaN-based deep ultraviolet light emitting diodes (DUV-LEDs) is currently limited by poor external quantum efficiency (EQE) and wall-plug efficiency (WPE). Internal quantum efficiency (IQE), as an important component of EQE, plays a crucial role in improving the performance of DUV-LEDs. IQE is related to the carrier injection efficiency and the radiation recombination rate in the active region. In order to improve the IQE of AlGaN-based DUV-LEDs, this work proposes a scheme to optimize the period number of superlattice electron barrier layer (SL-EBL) to achieve better carrier injection efficiency and confinement capability. The effect of the period number of SL-EBL on the luminous efficiency, reliability and carrier recombination mechanism of AlGaN-based DUV-LEDs with an emission wavelength of 273 nm was investigated. The experimental results show that the light output power (LOP), external quantum efficiency (EQE) and wall-plug efficiency (WPE) of the DUV-LEDs tend to first increase and then decrease with the period number increase of the SL-EBL, while the leakage current decreases and the reliability is enhanced.The maximum EQE and WPE of the DUV-LED are 3.5% and 3.2%, respectively, at an injection current of 7.5 mA were achieved when the period number of SL-EBL was fixed at 7 (the thickness was 28 nm). Meanwhile, the numerical simulation results show that the electron potential barrier height is boosted with increasing the period number of SL-EBL, and the variation of the hole potential barrier height is negligible. Therefore, increasing the period number of SL-EBL is beneficial for shielding the dislocations and suppressing the leakage of electrons into the p-type layer, which improves the luminous efficiency and reliability of DUV-LEDs. However, when the period number of SL-EBL exceeds 7, the excessively thick hole potential barrier prevents the injection of holes into the activation region and degrades the radiative recombination efficiency. Therefore, EQE and WPE will show an inflection point with the variation of the period number of SL-EBL. In addition, to investigate the carrier recombination mechanism of the active region, the experimental EQE curves are fitted by the ABC model as well as the different slopes in logarithmic light output power-current ( L-I ) curves are calculated after aging. It can be found that increasing the period number of SL-EBL can effectively suppress the non-radiative combination of carriers in the active region. This investigation can provide an alternative way to enhance the photoelectric performance of DUV-LEDs.

Effects of Mg-doped AlN/AlGaN superlattices on properties of p-GaN contact layer and performance of deep ultraviolet light emitting diodes

Performance Enhancement of AlGaN-based Deep Ultraviolet Light-emitting Diodes with AlxGa1-xN Linear Descending Layers

AlGaN-Based DUV LEDs With Al-Composition-Engineered AlGaN Superlattice Inserted at the p-EBL/Hole Supplier Interface

High-performance AlGaN-based deep ultraviolet light-emitting diodes with different types of InAlGaN/AlGaN electron blocking layer

Effect of Highly Doped p-AlGaN Layer to Improve the Ultimate Performance Parameters of 275 nm AlGaN-based UV-C LED

On the integrated p-type region free of electron blocking layer for AlGaN-based deep-ultraviolet light emitting diodes

Machine learning study on superlattice electron blocking layer design for AlGaN deep ultraviolet light-emitting diodes using the stacked XGBoost/LightGBM algorithm

AlGaN-Based Deep-Ultraviolet Light Emitting Diodes Fabricated on AlN/sapphire Template

Effects of the P-Alingan/gan Superlattices' Structure on the Performance of Blue LEDs

Impacts of p-GaN layer thickness on the photoelectric and thermal performance of AlGaN-based deep-UV LEDs

Effects of Electron Blocking Layer Thickness on the Electrical and Optical Properties of AlGaN-Based Deep-Ultraviolet Light-Emitting Diode

Enhanced hole concentration in strain-compensated BAlN/AlGaN superlattice for deep ultraviolet light-emitting diodes

Greatly Enhanced Performance of AlGaN-based Deep Ultraviolet Light Emitting Diodes by Introducing a Polarization Modulated Electron Blocking Layer.

The effect of different AlGaN insertion layer thicknesses on the photoelectric properties of InGaN/AlGaN near UV light emitting diodes

Optimization of AlGaN-Based Deep Ultraviolet Laser Diodes with Graded Rectangular Superlattice Electron Blocking Layer and Graded Trapezoidal Superlattice Hole Blocking Layer

Improvement of P-Type Conductivity in Al-rich AlGaN Substituted by MgGa Δ-Doping (aln)m/(gan)n (m≥n) Superlattice

Influence of the period number of superlattice electron barrier layer on the performance of AlGaN-based deep ultraviolet LED

Iii-Nitride Deep Ultraviolet Micro- and Nano-Photonics

Effect of Al Doping in the InGaN/GaN Multiple Quantum Well Light Emitting Diodes Grown by Metalorganic Chemical Vapour Deposition

Study on the Degradation Performance of AlGaN-Based Deep Ultraviolet LEDs under Thermal and Electrical Stress

Improving Performance of Algan‐Based Deep‐Ultraviolet Light‐Emitting Diodes by Inserting a Higher Al‐Content Algan Layer Within the Multiple Quantum Wells