Abstract:Large timber buildings, formed from both light and heavy timber construction, are becoming increasingly common in Europe. Many multiple-occupancy timber buildings, such as apartment blocks, are now constructed to greater heights and in densely populated urban locations. The fire-resistance performance of such timber buildings is generally related to the standard fire test. Alternatively, EN 1995-1-2 may be used to demonstrate fire resistance by means of calculation or numerical modelling. The latter is currently limited to standard fire exposure. In addition, modelling approaches are often avoided as many numerical codes do not normally offer the capability to model timber exposed to fire. The most obvious barrier is incorporating the different tensile and compressive strength/stiffness degradation with increasing temperature. Unlike many other structural materials, it is not possible to define a single relationship between timber Modulus of Elasticity (MoE) and temperature. When timber design is advanced to a ‘performance-based’ level further complexities will arise. For example, the definition of structure temperatures for non-standard fires is a difficult task, and assessment of strength/stiffness degradation on the basis of temperature alone is not sufficient due to char formation. As a result, when cooling is considered, material properties based upon stress state, temperature and temperature history are needed. To address the above limitations, a number of developments, which can be used with general FEA software, such as DIANA, to design timber structures for fire, are presented. The developments are incorporated via user-supplied subroutines written in FORTRAN code. The routines include code for determining MoE and strength based upon stress state, temperature and temperature history. They are implemented as part of a total strain-based constitutive model. The implementation of the routines is demonstrated using a simple continuous beam. The example is also used to demonstrate how compartmentation provisions and aspects of whole building behaviour can be used to better design large-section timber buildings. Comparisons are made with simple empirical approaches presented in EN 1995-1-2. Extensions to ‘performance-based design’ using parametric fires are also discussed.

Innovative Design of Fire Doors: Computational Modeling and Experimental Validation

Thermo-Mechanical Analysis of Masonry Brick Walls with Embedded Test Specimen Under Fire Exposure

Modeling the behavior of reinforced concrete walls under fire, considering the impact of the span on firewalls

Advanced Fire Design of Timber Structures Using Computational Techniques - Simple Indeterminate Structures

Two-Dimensional Modeling of Thermomechanical Responses of Rectangular GFRP Profiles Exposed to Fire

Consequence-Oriented Fire Intensity Optimization for Structural Design under Uncertainty

Temperature Evolution Within Fire Compartment, External Flame Structure Characteristic and Merging Behavior with Multiple-Openings

Experimental Investigation on Temperature Profiles at Ceiling and Door of Subway Carriage Fire

Optimal Design and Testing of a Thermoplastic Pressurized Passenger Door Manufactured Using Thermoforming

Fire resistance of 3D printed concrete composite wall panels exposed to various fire scenarios

Reduced scale test bench for investigating the upward flame heat impact on external thermal insulation composite system facades

Dynamic Fea And Simulation For A Series Of Blast-Resist-Door

Experimental study on temperature profile in long-narrow compartment fire with multiple lateral openings

A critical analysis of the influence of architecture on the temperature field of RC structures subjected to fire using CFD and FEA models

A study on the optimal design for preventing thermal deformation over the oven door

Three-dimensional finite element modelling OF the fire response of passive and prestressed near-surface mounted (NSM)–cfrp-strengthened reinforced concrete slab strips

Experimental Study of Transitional Behavior of Fully Developed Under-Ventilated Compartment Fire and Associated Facade Flame Height Evolution

Parametric investigation into the cross-sectional stress-strain behaviour, stiffness and thermal forces of steel, concrete and composite beams exposed to fire

Experimental investigation on the effect of natural fire exposure on the post‐fire behavior of reinforced concrete beams using electric radiant panel

Experimental and analytical studies of infill wall with sliding joints considering a door opening

Numerical Simulation Study on Factors Influencing Anti-Explosion Performance of Steel Structure Protective Doors under Chemical Explosion Conditions