Abstract:Tungsten (W) has been selected as the divertor material in ITER based on its promising thermal and mechanical properties. Despite these advantages, continued investigation has revealed W to undergo extreme surface morphology evolution in response to relevant fusion operating conditions. These complications spur the need for further exploration of W and other innovative plasma facing components (PFCs) for future fusion devices. Recent literature has shown that alloying of W with other refractory metals, such as tantalum (Ta), results in the enhancement of key PFC properties including, but not limited to, ductility, hydrogen isotope retention, and helium ion (He+) radiation tolerance. In the present study, pure W and W–Ta alloys are exposed to simultaneous and sequential low energy, He+ and deuterium (D+) ion beam irradiations at high (1223 K) and low (523 K) temperatures. The goal of this study is to cultivate a complete understanding of the synergistic effects induced by dual and sequential ion irradiation on W and W–Ta alloy surface morphology evolution. For the dual ion beam experiments, W and W–Ta samples were subjected to four different He+: D+ ion ratios (100% He+, 60% D+ + 40% He+, 90% D+ + 10% He+ and 100% D+) having a total constant He+ fluence of 6 × 1024 ion m−2. The W and W–Ta samples both exhibit the expected damaged surfaces under the 100% He+ irradiation, but as the ratio of D+/He+ ions increases there is a clear suppression of the surface morphology at high temperatures. This observation is supported by the sequential experiments, which show a similar suppression of surface morphology when W and W–Ta samples are first exposed to low energy He+ irradiation and then exposed to subsequent low energy D+ irradiation at high temperatures. Interestingly, this morphology suppression is not observed at low temperatures, implying there is a D–W interaction mechanism which is dependent on temperature that is driving the suppression of the microstructure evolution in both the pure W and W–Ta alloys. Minor irradiation tolerance enhancement in the performance of the W–Ta samples is also observed.

Suppression of surface microstructure evolution in W and W–Ta alloys during simultaneous and sequential He and D ion irradiation in fusion relevant conditions

The effect of W2+ irradiation and He+ exposure on W-Ta alloy fabricated via SPS

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Synergistic effects of W-Ta alloys exposed to various ELM-like fusion events

Properties of Potassium Doped and Tantalum Containing Tungsten after Heavy Ion Irradiation

Surface Modification of W-Ta-V-Cr Multi-Component Alloy after Low-Energy He Plasma Irradiation

Influence of Surface Melting on the Deuterium Retention in Pure and Lanthanum Oxide Doped Tungsten

Effects of Tantalum Alloying on Surface Morphology and Deuterium Retention in Tungsten Exposed to Deuterium Plasma

Behavior of High-Entropy W-rich Alloys Wx(TaVCrTi)y under He+ Irradiation

A prospect of using ternary W-5 wt%V-5 wt%Ta alloy manufactured by mechanical alloying and spark plasma sintering as plasma-facing material

Response of yttria dispersion strengthened tungsten simultaneously exposed to steady-state and transient hydrogen plasma

Preliminary exploration of a WTaVTiCr high-entropy alloy as a plasma-facing material

Surface Modification and Deuterium Retention of High Energy Rate Forging W-Y2O3exposed to Deuterium Plasma

Surface Modification of W–V Alloy Exposed to High Heat Flux Helium Neutral Beams

Surface damage of refractory high entropy alloys subject to He irradiation

A comparative study of irradiation response in amorphous TaTiWVCr refractory high entropy alloy with the counterpart of tungsten films

Molecular dynamics simulation of primary radiation damage in W-Ta alloys: Effect of tantalum

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Surface Mechanical Attrition Treatment of Tungsten and Its Behavior under Low Energy Deuterium Plasma Implantation Relevant to Iter-Divertor Conditions

TEM Studies of 1 MeV Fe+ Ion-Irradiated W Alloys by Wet Chemical Method: High-Temperature Annealing and Deuterium Retention

Effects of Low Energy and High Flux Helium/Hydrogen Plasma Irradiation on Tungsten As Plasma Facing Material