Abstract:In the selective laser melting process, metal powder melted by the laser heat source generates large instantaneous energy, resulting in transient high temperature and complex stress distribution. Different temperature gradients and anisotropy finally determine the microstructure after melting and affect the build quality and mechanical properties as a result. It is important to monitor and investigate the temperature and stress distribution evolution. Due to the difficulties in online monitoring, finite element methods (FEM) are used to simulate and predict the building process in real time. In this paper, a thermo-mechanical coupled FEM model is developed to predict the thermal behaviors of the melt pool by using Gaussian moving heat source. The model could simulate the shapes of the melt pool, distributions of temperature and stress under different process parameters through FEM. The influences of scanning speed, laser power, and spot diameter on the distribution of the melt pool temperature and stress are investigated in the SLM process of Al6063, which is widely applied in aerospace, transportation, construction and other fields due to its good corrosion resistance, sufficient strength and excellent process performance. Based on transient analysis, the relationships are identified among these process parameters and the melt pool morphology, distribution of temperature and thermal stress. It is shown that the maximum temperature at the center point of the scanning tracks will gradually increase with the increment of laser power under the effect of thermal accumulation and heat conduction, as the preceded scanning will preheat the subsequent scanning tracks. It is recommended that the parameters with optimized laser power (P = 175–200 W), scanning speed (v = 200–300 mm/s) and spot diameter (D = 0.1–0.15 mm) of aluminum alloy powder can produce a high building quality of the SLM parts under the pre-set conditions.

Investigation on the effect of the thermal dynamic, evaporation, and alternative material properties in a laser melt pool with a developed 2D model based on the VOSET method

Investigation on the transient phenomena during the evolution of melt pool

Transport Phenomena and Evolution Mechanism of the Melt Pool During a Laser-Based Metal Melting Process

Numerical study of competition effects of laser parameters on a transient melt pool evolution process

Evolution of molten pool during selective laser melting of Ti–6Al–4V

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Numerical Simulation in the Melt Pool Evolution of Laser Powder Bed Fusion Process for Ti6Al4V

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

Numerical simulation of melt pool size and flow evolution for laser powder bed fusion of powder grade Ti6Al4V

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

Particle scale modelling of melt pool dynamics and pore formation in selective laser melting additive manufacturing

Modeling on Molten Pool Transport in Laser Deposition Processes by Lattice Boltzmann Method

A three-phase model for simulation of heat transfer and melt pool behaviour in laser powder bed fusion process

The Thermo-Mechanical Coupling Effect in Selective Laser Melting of Aluminum Alloy Powder

Thermal behavior in single track during selective laser melting of AlSi10Mg powder

In-situ Characterization and Quantification of Melt Pool Variation under Constant Input Energy Density in Laser Powder Bed Fusion Additive Manufacturing Process

Influence of oxygen content on melt pool dynamics in metal additive manufacturing: High-fidelity modeling with experimental validation

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection

Numerically Modeling and Characteristics of Molten Pool During Laser Processing

Revealing the effects of laser beam shaping on melt pool behaviour in conduction-mode laser melting

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition