Abstract:<p>In the present work, an innovative high-throughput method was developed to fabricate a Ti-6Al-4V alloy via pulsed laser melting with water-cooled copper mold. Moreover, a three-dimensional transient model was established via numerical simulation to reveal the dynamic mechanism of heat transfer and fluid flow of the molten pool during high-throughput laser fabrication processes. Different laser powers, laser pulse durations and Marangoni coefficients were adopted to perform the numerical simulations, revealing the underlying physics of the heat transfer and fluid flow during the melting and solidification process. Special attention was paid to the cooling rate of the molten pool affected by cooling water velocity. Numerical results indicated that a "button" sample can be prepared in a short time of 200 ms by adjusting the processing parameters in this high-throughput preparation process. The maximum temperature of the molten pool was attained at the center underneath the laser beam and decreased radially outward. There was vigorous fluid flow mainly driven by thermal-capillary force in the molten pool. With increases in laser power and laser pulse duration, both the peak temperature and velocity of the molten pool increased. Accordingly, a high cooling rate was obtained under high cooling water velocity. Furthermore, the Marangoni effect fully changed the flow direction of the molten pool fluid, and the Marangoni convection flow influenced the temperature distribution of the molten pool. A new principle of the metallurgical dynamic behavior for the high-throughput laser fabrication process was established in this study and can provide technical guidance for high-throughput preparation experiments, such as laser parameter selection, structural control, and performance optimization.</p>

Numerically Modeling and Characteristics of Molten Pool During Laser Processing

Features of Molten Pool Free Surface in Laser Processing

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

Numerical simulation of the molten pool character in high power fiber laser welding

Molten pool behavior and its mechanism during selective laser melting of polyamide 6 powder: single track simulation and experiments

Numerical study of molten metal melt pool behaviour during conduction-mode laser spot melting

Thermal behavior and fluid dynamics within molten pool during laser inside additive manufacturing of 316L stainless steel coating on inner surface of steel tube

Numerical simulation of melt pool size and flow evolution for laser powder bed fusion of powder grade Ti6Al4V

Modeling and numerical studies of high-precision laser powder bed fusion

Modeling on Molten Pool Transport in Laser Deposition Processes by Lattice Boltzmann Method

Numerical Simulation in the Melt Pool Evolution of Laser Powder Bed Fusion Process for Ti6Al4V

Revealing the effects of laser beam shaping on melt pool behaviour in conduction-mode laser melting

High-throughput laser fabrication of Ti-6Al-4V alloy: Part I. Numerical investigation of dynamic behavior in molten Pool

Numerical Analysis of Molten Pool Dynamic Behaviors during High-Speed Oscillation Laser Welding with Aluminum Alloy

Influence of Molten Pool Flow and Evaporation on the Surface Morphology During Laser Micro-Texture Processing

Numerical Simulation and Parametric Analysis of Selective Laser Melting Process of AlSi10Mg Powder

Modeling Rapid Solidification and Melting Processes for Multiphase Flows in a Welding Technology Application

Melt pool evolution and microstructure simulation of SLM 316L based on SPH-PFM coupling model

Modeling of the Flow Field and Clad Geometry of a Molten Pool during Laser Cladding of CoCrCuFeNi High-Entropy Alloys

An Analytical Model for Rapid Predicting Molten Pool Geometry of Selective Laser Melting (SLM)