Abstract:In recent times, auxetic woven structures gained considerable attention from the researchers due to their excellent impact properties in high-performance areas. Researchers have done much work on the auxetic behavior of the natural and low-performance yarns in two-dimensional structures. Keeping in view the structural application of auxetic structures, in this work, three-dimensional (3D) woven auxetic fabrics were developed on conventional weaving machines with high-performance yarns. Effect of high-performance yarns (Para-aramid and UHMWPE) as the main structure and binding threads on the auxeticity of 3D fabric structures and the impact properties of their corresponding composites were discussed. For this purpose, eight different orthogonal 3D woven structures were produced with para-aramid filament yarn as warp and weft, whereas ultra-high molecular weight polyethylene (UHMWPE) filament yarn was used as a binder. The tensile load was applied to the 3D fabrics to check their auxeticity, and a change in thickness was recorded. The results showed that as the float length of binder yarn and warp yarn increases with the equal and same ratio, the auxeticity also increases. While auxeticity decreases as the difference between the float length of binder yarn and warp yarn increases. The Negative Poisson's Ratio (NPR) of 3D woven fabrics ranged from −0.9 to −2.98. In the second step, these 3D woven fabrics were fabricated into their composites using unsaturated polyester resin, and the hand-layup technique. Their impact strength was measured using the Charpy test method. Auxetic woven composites made of high-performance yarns structures showed impact strength ranging from 55.64 kJ/m2 to 158.46 kJ/m2. High-performance yarns (Para-aramid and Ultra-high molecular weight polyethylene) were used to create eight 3D woven and composite samples with enhanced auxetic behavior.The result shows that samples having maximum binding yarn float length and fewer intersection points show maximum auxeticity and increased energy absorption.The maximum auxeticity and impact energy absorption obtained was -2.98 and 158.46 kJ/m2, respectively.The current research has applications in protective textiles and bulletproof composite panels.

Development of uni-stretch woven fabrics with zero and negative Poisson’s ratio

Finite element analysis study of parameters influencing the Poisson's ratio of auxetic woven fabrics

In situ energy absorption and negative Poisson's ratio behaviors of 3D weft knitted auxetic fabrics under variant measurements

A novel three-component helical auxetic yarn with staple fibers prepared by ring spinning

Characterization of tensile properties of chain stitch structure fabric with negative Poisson's ratio yarn

Tensile theoretical modeling and auxetic behavior analyzing of negative Poisson's ratio yarn

A study of tubular braided structure with negative Poisson’s ratio behavior

Geometric Analysis of Three-Dimensional Woven Fabric with in-Plane Auxetic Behavior

Design and Development of 2D Woven Auxetic Fabric and Composites Based on Wave Form Geometry

Study on the Tensile Behavior of Helical Auxetic Yarns with Finite Element Method

Effect of structural parameters on formability of auxetic weft-knitted fabrics based on zigzag structure

Two-dimensional Materials with Intrinsic Auxeticity: Progress and Perspectives

ABC‐Auxetics: An Implicit Design Approach for Negative Poisson's Ratio Materials

Creating three-dimensional (3D) fiber networks with out-of-plane auxetic behavior over large deformations

3D woven auxetic composites using onloom shaped reinforcement

In-Plane Behavior of Auxetic Non-Woven Fabric Based on Rotating Square Unit Geometry under Tensile Load

Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns

Stretchable and negative-Poisson-ratio porous metamaterials

Finite element simulation of an auxetic plied yarn structure

Mechanics of Auxetic Materials

Stretchable negative Poisson's ratio yarn for triboelectric nanogenerator for environmental energy harvesting and self-powered sensor