Abstract:Objective Oxygen (O-2) is one of the most important components in the atmosphere and plays a key role in the survival of all living organisms on Earth. However, the atmospheric O-2 concentration is decreasing due to the rapid expansion of human activities. The Tibet Plateau, known as the third pole, is a plateau with the highest altitude in the world. For a long time, as the O-2 content of the local atmosphere is lower than that of other regions, the ecosystem is extremely fragile and sensitive. Long-term quantitative monitoring of atmospheric O-2 concentration is crucial to understand the evolution pattern of decreasing O-2 and its effects on the ecosystem of the Tibet Plateau. However, it requires a very challenging detection precision of 10-6 level. Various O-2 measurement methods have been proposed. The commonly employed electrochemical techniques and magnetic dynamics methods are compact and easily commercial available but suffer from long-term stability and vibration. In contrast, laser absorption spectroscopic techniques based on the Beer-Lambert law can provide high reliability, completely non-contact measurement, and long-term performance. In particular, Faraday rotation spectroscopy further offers high selectivity for paramagnetic molecules and is a powerful tool for O-2 measurement with high precision. Our paper develops a simply easy-to-deploy and maintenance-free O-2 sensor based on FRS and provides a feasible sensor scheme for O-2 detection in Tibetan Plateau. Methods A 762. 3 nm continuous wave distributed-feedback laser working at room temperature is employed as the probe laser. The laser current and temperature are controlled by a commercial laser controller. O-2 measurement selects the PP( 1) (J=1) line with a strong near-infrared magnetic effect and a strength of 3. 063x10(-24) cm/molecule at 13118. 04 cm-1. The static magnetic field is generated by a solenoid coil under constant current excitation. A Herriott optical multi-pass cell with two 8 cm diameter spherical mirrors separated at 35 cm is adopted to provide an effective absorption path length of 7 m. The cell is made of aluminum alloy which is oxidized and blackened to reduce stray light. A polarizer is utilized before the laser beam incidence in the cell to clean the polarization state, and a second polarizer, placed after the light beam exits the cell, acts as a polarization analyzer. Various parameters of the sensor are optimized to ensure that the sensor operates in optimal conditions, including magnetic field strength, offset angle, and modulation amplitude. Finally, the performance of the sensor performance is assessed by continuous O-2 measurement with a fixed concentration. The system stability and detection precision are analyzed by Allan deviation and a histogram of frequency counts. Results and Discussions The parameters of the sensor are optimized. The noise measurement shows that the optimal offset angle is 10 degrees and the corresponding total noise of the system is 0. 33 mu V/Hz1/2 (Fig. 7). The optimal modulation amplitude for O-2 detection at atmospheric pressure is 18 mV (Fig. 8). We find that the measured Faraday rotation spectral signals are proportional to magnetic field strength in the range of 0 to 540 Gs (Fig. 9). The 180 Gs field strength is chosen due to the safety and heat. The stability of the magnetic field strength is tested continuously for 12 hours by a Gaussmeter with a resolution of 0. 1 Gs and an accuracy of +/- 0. 3% of the reading (Fig. 5). The results indicate high stability. System calibration is performed with a strong linear relationship between Faraday rotation spectral signals and O-2 concentrations. A fixed volume ratio of about 5. 36% is continuously measured for 3600 s and the time resolution is 1 s (Fig. 12). A Gaussian profile is fitted to the frequency distribution histogram. The standard deviation value which corresponds to the actual instrument precision is 149x10(-6). Allan deviation evaluation demonstrates that the optimal average integration time of the system is 60 s, at which the detection precision can be improved to 32x10(-6). Conclusions A high-precision atmospheric O-2 sensor based on Faraday rotation spectroscopy is developed. The measurement selects the P P(1)(J=1) line with a strong near-infrared magnetic effect at 13118. 04 cm(-1). A Herriott optical multi-pass cell with coils wounded is designed specifically for Faraday rotation spectroscopy to offer an absorption path length of 7 m and a magnetic field strength of 180 Gs, which effectively enhances the detection signal and improves the system performance. The operating parameters of the sensor system are optimized, and the performance is evaluated. As a result, a detection precision of 32x10(-6) with the acquisition time of 60 s is achieved, thereby confirming the precision and reliability of the sensor, and providing a feasible scheme for long-term O-2 detection in Tibet Plateau. In future work, we will develop permanent rare-earth magnets instead of solenoid coils, try to provide higher-strength constant magnetic fields, and pursue lower power consumption and higher performance. We hope that our future research can achieve the networking O-2 measurement in the Tibet Plateau.

Ultrasonic Oxygen Sensor.

Ppm-level Oxygen Detection System Based on Deep-Ultraviolet-absorption Spectroscopy

Sensitive Detection of Oxygen Using a Diffused Integrating Cavity As a Gas Absorption Cell

Environmental oxygen monitoring in confined spaces by a mobile sensor system based on OA-ICOS and PSO-SVM without pressure control

Oxygen Optode Sensors: Principle, Characterization, Calibration, and Application in the Ocean

Highly precise and stabilized measurement system for long-term oxygen measurement at atmospheric concentration level

Implementation of Ultrasonic Sensing for High Resolution Measurement of Binary Gas Mixture Fractions

Development and measurement of airborne oxygen sensor for aircraft inerting system based on TDLAS with pressure compensation and 2f/1f normalized method

Highly Sensitive Trace Oxygen Sensing Based on Far-Ultraviolet Absorption Spectroscopy

Oxygen Sensor Based on Faraday Rotation Spectroscopy

Highly Sensitive Measurement of Oxygen Concentration Based on Reflector-Enhanced Photoacoustic Spectroscopy

On-Board Monitoring of SO2 Ship Emissions Using Resonant Photoacoustic Gas Detection in the UV Range

Sensitive Dual Sensing System for Oxygen and Pressure Based on Deep Ultraviolet Absorption Spectroscopy

A Coin-Sized Oxygen Laser Sensor Based on Tunable Diode Laser Absorption Spectroscopy Combining a Toroidal Absorption Cell

Determination of Henry's law coefficient of oxygen in LAB for JUNO

Quantitative Measurements of Ground State Atomic Oxygen in Atmospheric Pressure Surface Micro-Discharge Array

Resistive, Temperature-Independent Metal Oxide Gas Sensor for Detecting the Oxygen Stoichiometry (Air-Fuel Ratio) of Lean Engine Exhaust Gases

Measurement and modeling of oxygen content in a demand constant mass ratio injection rebreather

Oxygen measurement by multimode diode lasers employing gas correlation spectroscopy.

Ozone Detection via Deep-Ultraviolet Cavity-Enhanced Absorption Spectroscopy with a Laser Driven Light Source