Abstract:Objective The LED-based incoherent broadband cavity-enhanced spectroscopic absorption technology features simultaneous detection of multiple species, high resolution, high sensitivity, and strong real-time performance, becoming an important means of trace gas detection technology. However, this technology also has many problems, such as the large divergence angle and poor collimation of LED, which requires efficient light source coupling systems. Additionally, the light emitted by LED is greatly affected by temperature and current, and the instability of LED temperature control will directly interfere with measurement results. We discuss the LED coupling method and the temperature control problems and propose corresponding solutions. Methods The high-precision miniaturized broadband cavity-enhanced absorption spectrum (HPM-BBCEAS) system is developed from a previous version in the laboratory. An LED light source with a central wavelength of 460 nm is selected as the detection light. The direct focusing of the incident end using double-bonded lenses is adopted instead of traditional fiber optic sampling coupling, which improves the coupling efficiency of the light source. Combined with a high-sensitivity resonant cavity with an optical cavity length of 322. 40 mm, high-precision and miniaturized NO2 measurement is achieved. The device adopts a self-designed LED automatic temperature control system to integrate the proportional integral derivative (PID) algorithm and the Kalman filtering algorithm and proposes an improved PID-Kalman filtering algorithm (Fig. 3). The main improvements are two-fold. First, the program can modify the PID parameters based on error changes to achieve fast and stable adjustment. Second, the Kalman filtering is added to the original PID to reduce the actual acquisition error and realize a more accurate calculated PID output value (Fig. 4). The system achieves rapid temperature control by adjusting the Peltier cooling time, reducing the light intensity fluctuations caused by temperature changes, improving the signal-to-noise ratio, and solving the problem of large system stability and detection accuracy errors caused by temperature drift. Results and Discussions The experimental results show that by employing the improved PID algorithm and the conventional PID algorithm for long-term temperature monitoring of the LED light source on the same system, the adjustment time of the improved PID algorithm is approximately 13 times shorter than that of the conventional PID algorithm during analyzing the adjustment time from the process of turning off the LED to turning it on and adjusting the temperature to the stable stage, with the set temperature of 28.. The data is evaluated by taking the stable data of the LED for about one hour, and the results show that the temperature fluctuation range of the improved PID algorithm is 27. 985-28. 015. with a fluctuation range of +/- 0. 015., while that of the conventional PID algorithm is 27. 8-28. 2. with a fluctuation range of +/- 0. 2.. This indicates that the control precision of the improved PID algorithm is more than ten times higher than that of the conventional PID algorithm. From the perspective of light intensity fluctuation, the light intensity fluctuation range of the improved PID algorithm is approximately (30125 +/- 25) cd, while that of the conventional PID algorithm is approximately (30125 +/- 150) cd. This reveals that the control precision and light intensity fluctuation of the improved PID algorithm are better than those of the conventional PID algorithm. When the improved PID algorithm and the conventional PID algorithm are applied to the broadband cavity-enhanced absorption spectroscopy (BBCEAS) system, the influence of temperature control precision on the system detection limit is evaluated. The evaluation results show that compared with the conventional PID algorithm, the stability and detection limit of the instrument are both improved by about ten times when the improved PID algorithm is adopted (Fig. 7). Conclusions We introduce a high-precision NO2 analyzer based on BBCEAS technology. The analyzer adopts a cagetype coaxial integrated cavity structure consisting of a light source, a resonant cavity, and fiber optic output, greatly improving the system integration. Combined with an improved PID-Kalman filtering algorithm for the temperature control system, the stability of the entire system is greatly enhanced. The developed temperature control system can achieve precise control of the LED temperature in two minutes with a control accuracy of up to +/- 0. 015., guaranteeing stable instrument measurement operation. Under the optical cavity length of 322. 40 mm and a mirror reflectivity of 0. 99985, NO2 detection limit of 21x10(-12) (60 s, 1s) is achieved. Leveraging high-reflectivity mirrors with higher reflectivity can provide longer absorption paths and lower detection limits. The comparison of the instrument with the gas distribution system validates the accuracy of the system's NO2 measurements. Actual atmospheric applications demonstrate that this device can capture instantaneous NO2 emissions, proving the reliability of the instrument's long-term stable operation.

A Portable Nitrogen Dioxide Instrument Using Cavity-Enhanced Absorption Spectroscopy

A mini broadband cavity enhanced absorption spectrometer for nitrogen dioxide measurement on the unmanned aerial vehicle platform

Development of a Portable Cavity Enhanced Absorption Spectrometer for the Measurement of Ambient N&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;5&lt;/sub&gt;: Experimental Setup, Lab Characterizations, and Field Applications under Polluted Urban Environment

Development of a portable Cavity Enhanced Absorption Spectrometer for the measurement of ambient N<sub>2</sub>O<sub>5</sub>: experimental setup, lab characterizations, and field applications under polluted urban environment

Airborne Cavity Enhanced Absorption Spectroscopy for High Time Resolution Measurements of Atmospheric No2

Development of A Portable Cavity-Enhanced Absorption Spectrometer for the Measurement of Ambient No3 and N2o5: Experimental Setup, Lab Characterizations, and Field Applications in A Polluted Urban Environment

Development of an Incoherent Broadband Cavity-Enhanced Absorption Spectrometer for in Situ Measurements of HONO and NO2

Development of a portable cavity-enhanced absorption spectrometer for the measurement of ambient NO&lt;sub&gt;3&lt;/sub&gt; and N&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;5&lt;/sub&gt;: experimental setup, lab characterizations, and field applications in a polluted urban environment

A broadband absorption spectrometer using light emitting diodes for ultrasensitive, in situ trace gas detection

Incoherent broadband cavity enhanced absorption spectroscopy for in situ measurements of NO 2 with a blue light emitting diode

Thermal Dissociation Cavity-Enhanced Absorption Spectrometer For Measuring No2, Ro2no2, And Rono2 In The Atmosphere

Thermal Dissociation Cavity Enhanced Absorption Spectrometer for Detecting ANs and PNs in the Atmosphere

A broadband cavity enhanced absorption spectrometer for aircraft measurements of glyoxal, methylglyoxal, nitrous acid, nitrogen dioxide, and water vapor

Thermal dissociation cavity-enhanced absorption spectrometer for measuring NO&lt;sub&gt;2&lt;/sub&gt;, RO&lt;sub&gt;2&lt;/sub&gt;NO&lt;sub&gt;2&lt;/sub&gt;, and RONO&lt;sub&gt;2&lt;/sub&gt; in the atmosphere

Portable broadband cavity-enhanced spectrometer utilizing Kalman filtering: application to real-time, in situ monitoring of glyoxal and nitrogen dioxide.

Amplitude Modulated Multimode-Diode-laser-based Cavity Enhanced Absorption Spectroscopy with a Phase-Sensitive Detection for High-Sensitivity NO2 Detection

Thermal dissociation cavity enhanced absorption spectrometer for detecting NO<sub>2</sub>, RO<sub>2</sub>NO<sub>2</sub> and RONO<sub>2</sub> in the atmosphere

Development of an incoherent broadband cavity-enhanced absorption spectroscopy (IBBCEAS) instrument for autonomous field measurements of HONO and NO2 in a rural area

Broadband Cavity-Enhanced Atmospheric Nitrogen Dioxide Detection Technology Based on High-Precision Proportional Integral Derivative Temperature Control

Incoherent Broadband Cavity Enhanced Absorption Spectroscopy for Measurements of Atmospheric Hono

A practical alternative to chemiluminescence-based detection of nitrogen dioxide: cavity attenuated phase shift spectroscopy