Abstract:Interest in soundless chemical demolition agents (SCDAs), also known as expansive cements, as potentially viable alternatives to explosives for rock fragmentation, has been growing in recent years. Consequently, there is an increasing amount of literature on the use of SCDA for the breakage of rock blocks and boulders. Limited research has been conducted so far on the breakage of excavation fronts, such as tunnel or drift faces, using SCDA. This is due to the perception that the planar compressive in-situ stresses in the face would inhibit the creation and propagation of fracturing due to expansive pressure. This study proposes a novel V-cut method for demolishing rock panels under biaxial stress using SCDA. This method was examined through large-scale tests and numerical modelling. The rock panels were subjected to high biaxial confinements of 26 and 40 MPa. Such a level of confinement corresponds to an in-situ stress state 1000 m below the surface in the Canadian shield. The V-cut drillhole pattern employs two sets of three SCDA holes angled at 45° from the face of a Stanstead granite panel. The drillhole arrangement aims to create a V-shaped wedge in the plane of major principal stress. When angled drillholes are subjected to expansive pressure, they tend to cast out of the panel face, causing fragmentation. Two panels of 1 m × 1 m × 0.25 m were successfully demolished using the proposed method. The three-dimensional fast Lagrangian analysis code FLAC3D modelling was used to reconstruct the panel failure mechanism owing to the V-cut. This study demonstrates the feasibility of fragmenting an excavation front, such as a rock excavation face, with SCDA using a V-cut drill hole pattern while subjected to high biaxial confinement.

A study on the optimal use of soundless cracking demolition agents in fragmentations of concrete based on the extended finite element method

MESOSCALE FRACTURE MODELING OF FOUR-PHASE CONCRETE USING A DEM-ENHANCED STRUCTURE GENERATION METHOD

Experimental and Numerical Explorations on the Optimized Applications of SCDA in Cracking Concrete Blocks

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

3D crack propagation in concrete induced by soundless cracking demolition agents

Hybrid Phase-Field Modeling of Mesoscopic Failure in Concrete Combined with Fourier-Voronoi Stochastic Aggregate Distribution Modelling Approach

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Hole layout calculation method of reinforced concrete beam demolition with soundless chemical demolition agents: Experimental investigation

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Experimental study on residual compressive bearing capacity of cracked reinforced concrete columns by SCDA

Numerical simulation of expansion process of soundless cracking demolition agents by coupling finite difference and discrete element methods

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Study of the Healing Effect of Concrete with Supplementary Cementitious Materials after Early-Age Damage by Acoustic Emission Technique

A novel V-cut method for explosive-free breakage of biaxially loaded rock using soundless chemical demolition agents

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Dynamic Fracture Catastrophe Model of Concrete Beam under Static Load

3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model

New concrete cracking model established based on fracture mechanics and damage theory

Multi-Scale Analysis Of Damage Process For Concrete Structures

Experimental study on acoustic emission and surface morphology characteristics of concrete under different fracture modes

Mesoscopic discrete modeling of compression and fracture behavior of concrete: Effects of aggregate size distribution and interface transition zone