Abstract:Cracking of pavement materials affects the service performance of pavement structures. It is widely investigated by discrete element method (DEM) because the DEM can present the cracking behavior and mechanism from the mecroscopic perspective. However, improper calibration method is time-consuming and the simulation results are not applicable for different loading conditions. To address this issue, a systematical calibration method is proposed to establish a more reasonable DEM model, and it is used to explore the cracking behavior and mechanism for pavement materials. The fiber reinforced cement treated aggregates (F-CTA) used to construct the pavement base are selected as an example to elaborate the process. First, contacts within the F-CTA were divided into five groups according to physical components. Then, laboratory tests were performed to obtain macro mechanical properties including strength and modulus. Next, the corresponding virtual tests were established and the contact model parameters were calibrated from mono-component to mixture. This calibration method was validated by the three-point bending test incorporating all contact parameters obtained from the above calibrations and the process of cracking evolution was analyzed. Results show that the simulated mechanical responses and crack distribution based on the systematical calibration are in good agreement with laboratory measurements and observations, exhibiting well reliability for calibrating contact parameters of composite material. Young's modulus of the F-CTA is sensitive to the mecro effective modulus in the virtual indirect tensile test while Young's modulus and tensile strength are vulnerable to the mecro cohesion in the virtual uniaxial compression test. The mortar-aggregate and mortar-aggregate interface is relatively weak where cracks are prone to appear. The fibers can optimize the distribution of the crack network. The cracking evolution contains three stages and the second stage has a significant influence on the cracking behavior of the F-CTA.

Experimental and Numerical Explorations on the Optimized Applications of SCDA in Cracking Concrete Blocks

A study on the optimal use of soundless cracking demolition agents in fragmentations of concrete based on the extended finite element method

Hybrid Phase-Field Modeling of Mesoscopic Failure in Concrete Combined with Fourier-Voronoi Stochastic Aggregate Distribution Modelling Approach

3D crack propagation in concrete induced by soundless cracking demolition agents

Experimental study on residual compressive bearing capacity of cracked reinforced concrete columns by SCDA

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Numerical simulation of expansion process of soundless cracking demolition agents by coupling finite difference and discrete element methods

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Study of the Healing Effect of Concrete with Supplementary Cementitious Materials after Early-Age Damage by Acoustic Emission Technique

Hole layout calculation method of reinforced concrete beam demolition with soundless chemical demolition agents: Experimental investigation

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Experimental study on acoustic emission and surface morphology characteristics of concrete under different fracture modes

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Experimental and Numerical Investigations on Crack Intersection and Propagation of Concrete Structures

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Experimental study on loading rate and notch-to-depth ratio effects on flexural performance of self-compacting concrete with acoustic emission and digital image correlation technologies

Investigation of the Mechanical, Microstructural and Mineralogical Morphology of Soundless Cracking Demolition Agents During the Hydration Process

Numerical Study of Shrinkage Cracking in Concrete and Concrete Repair Systems

A novel V-cut method for explosive-free breakage of biaxially loaded rock using soundless chemical demolition agents