Abstract:The impacting and rebounding behaviors of straight elastic components are investigated and a unified approach is proposed to analytically predict the whole process of the collision and rebounding of straight elastic bars and beams after each of them impinges on ideal (massless) elastic spring(s). The mathematical problems with definitive solution are formulated, respectively, for both the constrained-motion and free-motion stages, and the method of mode superposition, which is concise and straightforward especially for long-time interaction and multiple collision cases, is successfully utilized by repeatedly altering boundary and initial conditions for these successive stages. These two stages happen alternatively and the collision process terminates when the constrained motion no longer occurs. In particular, three examples are investigated in detail; they are: a straight bar impinges on an ideal elastic spring along its axis, a straight beam vertically impinges on an ideal elastic spring at the beam's midpoint, and a straight beam vertically impinges on two ideal springs with the same stiffness at the beam's two ends. Numerical results show that the coefficient of restitution (COR) and the nondimensional rebounding time (NRT) only depend on the stiffness ratio between the ideal spring(s) and the elastic bar/beam. Collision happens only once for the straight bar impinging on spring, while multiple collisions occur for the straight beam impinging on springs in the cases with large stiffness ratio. Once multiple collisions occur, COR undergoes complicated fluctuation with the increase of stiffness ratio. Approximate analytical solutions (AASs) for COR and NRT under the cases of small stiffness ratio are all derived. Finally, to validate the proposed approach in practical collision problems, the influence of the springs' mass on the collision behavior is demonstrated through numerical simulation.

Multiple collisions of two steel balls in a Newton’s cradle

Collision and Rebound of Ping Pong Balls on A Rigid Target

Collision and Rebound Behavior of Elastic Circular Ring Impinging on Elastic Column

Rebound Modeling of Spinning Ping-Pong Ball Based on Multiple Visual Measurements

Vibrational Effects on the Coefficient of Restitution

Dynamic Behavior of Elastic Bars and Beams Impinging on Ideal Springs

Oblique angle collisions of two pendulum balls

Experiment of Many-Body Collision

Frictionless Racquetball?

Synchronization Behavior of Newton's Cradle

Energy dissipation during the impact of steel ball with liner in a tumbling ball mill

Independent friction-restitution modeling of collisions: application to planar sphere rebound on a massive surface

On the Stopping Time of a Bouncing Ball

Integral Field Spectroscopy with the Gemini 8-m Telescopes

Three Balls Problem Revisited - On the Limitations of Event-Driven Modeling

THEORETICAL ANALYSIS OF THE THREE BALLS SYSTEM WITH MULTIPLE IMPACT

Oblique Collisions of Baseballs and Softballs with a Bat

On the Issue of Collision of Balls in an Auto-Balancing Device

On the Mutual Coefficient of Restitution in Two Car Collinear Collisions

A Newton method for rigid body frictional impact with multiple simultaneous impact points

Impact Crushing and Rebound of Thin-Walled Hollow Spheres