Abstract:Background: Dimensional control and surface finish of the femoral head and acetabular liner are critical factors in the manufacturing process due to the risk of increased polyethylene wear, which is the primary cause of aseptic failure of a metal/polymer hip prosthesis. The aim of this study is to perform a dimensional and surface finish analysis to evaluate the reproduction and accuracy of the manufacturing processes of metal femoral heads and ultra high molecular weight polyethylene acetabular liners. Methods: Four femoral heads and acetabular liners from 5 manufacturers were evaluated. The methods of evaluation followed the standards ISO 7206-2:2011 and ISO 21535:2010. Results: The diameter, sphericity, and roughness of the femoral heads from all the manufacturers were in accordance with the standard requirements. Only the sphericity showed a lack of repeatability among the manufacturers. The variability in sphericity was high among some manufacturers and low in others. The diameters of the acetabular liners of 2 manufacturers were not in accordance with the standard requirements. The repeatability of sphericity, thickness, and roughness of the acetabular liners were heterogeneous among the manufacturers, which means that some manufacturers need to improve quality control. Conclusion: Our results showed a good dimensional and surface finish control of the manufacturing processes of the femoral heads. However, the same control was not shown during the manufacturing of the acetabular liners although all samples had a thickness and sphericity in accordance with the standard. A better quality control of the manufacturing process of ultra high molecular weight polyethylene acetabular liners should be made to improve the dimensional parameters of the acetabular liners and the tribological pair.

Case study: The application of machining-conditioning to improve the wear resistance of Ti6Al4V surfaces for human hip implants

Feasibility study of micro-groove cross hatched surface texturing on Ti6Al4V for improved biotribological performance in metal-on-polymer hip implant

Mechanical Tests, Wear Simulation and Wear Particle Analysis of Carbon-Based Nanomultilayer Coatings on Ti6Al4V Alloys As Hip Prostheses

Evaluation of fretting corrosion fatigue in burnishing of Ti6Al4V component for artificial hip joint

Fatigue performance of medical Ti6Al4V alloy after mechanical surface treatments

Comparison of wear properties of Ti6Al4V fabricated by wrought and electron beam melting processes in simulated body fluids

Tribological Properties of Ti6Al4V Alloy Composite Texture Fabricated by Ultrasonic Strengthening Grinding and Laser Processing

Increasing the wear resistance of hip prostheses components using micro-nanostructured thin layers

Tribocorrosion experimental investigation on Ti6Al4V burnished samples used for hip joint replacement

Effect of high-speed ultrasonic vibration cutting on the microstructure, surface integrity, and wear behavior of titanium alloy

Tribological and mechanical performance evaluation of metal prosthesis components manufactured via metal injection molding

Numerical investigation on the wear characteristics of hip implant under static loading

Machinability Assessment of Titanium Alloy Ti-6Al-4V for Biomedical Applications

Microstructural, Mechanical, and Tribological Characterization of Selective Laser Melted CoCrMo Alloy under Different Heat Treatment Conditions and Hot Isostatic Pressing

Machining of a functional hip prosthesis cone in TI-6AL-4V ELI titanium alloy produced by electron beam melting

Effect of different laser texture configurations on improving surface wettability and wear characteristics of Ti6Al4V implant material

Tribological Investigation of Additive Manufacturing Medical Ti6Al4V Alloys Against Al2O3 Ceramic Balls in Artificial Saliva

Tribological Behavior of Direct Metal Laser Sintering–Manufactured Ti6Al4V Alloy in Different Biofluids for Orthopedic Implants

Microstructure analysis and wear behavior of titanium cermet femoral head with hard TiC layer.

Evaluation of Surface Finish and Dimensional Control of Tribological Metal-Ultra High Molecular Weight Polyethylene Pair of Commercially Available Hip Implants

The influence of laser texturing on the tribological behavior of titanium alloy Ti6Al4V in medical applications