Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The pressing demand of Ti-6Al-4V (grade 5) in aerospace, medical, marine, and chemical processing industries has gained momentum in recent years due to its excellent properties such as high strength to weight ratio and corrosion resistance, bio-compatibility and a common material for additive manufacturing. Additive manufactured Ti-6Al-4V have higher mechanical properties as compared to wrought alloys due to difference in microstructure that negatively influences the machinability characteristics and also lacks ductility. The main limitation of fabricated additive manufactured (AMed) component is the poor surface quality, staircase effect and adhering of non-melted powder particles to the fabricated components. Again, fatigue life of components increases with decrease of surface roughness. Therefore the need of machining of AMed titanium alloys in recent years are gaining importance to eliminate these problems so that desired surface quality and tolerances can be achieved. Therefore the objective of the study is to develop additive manufactured Ti-6Al-4V through direct metal laser sintering process and investigate its machinability characteristics under flood cooling environment with respect to responses as tool wear, surface roughness, cutting temperature, and chip morphology. As most of the heat generated at the interfaces has been carried away through flood cooling, the rate of growth of tool wear, cutting temperature, surface roughness, and degree of serration decreases and thus makes the performance of AMed Ti alloys are comparable with wrought Ti alloys. The dominant tool wear mechanism during machining AMed Ti alloy have been found to be abrasion, chipping, adhesion, BUE, chemical interaction between titanium and cutting tool materials, coating delamination. Optimal parameters for multi-responses are 0.1 mm depth of cut, 0.1 mm/rev feed rate, and 70 m/min cutting speed and improved. Mathematical models are said to be significant and fitted well. Because of the improved machinability, AMed Ti alloys find itself suitable in industrial applications.

Machinability Assessment of Titanium Alloy Ti-6Al-4V for Biomedical Applications

Machining of titanium alloys for medical application - a review

Machining of Spherical Component Fabricated by Selected Laser Melting, Part II: Application of Ti in Biomedical

A critical review of advanced techniques to improve machining of titanium alloy (grade 5)

Potential of titanium based alloys in the biomedical sector and their surface modification techniques: A review

The State of the Art in Machining Additively Manufactured Titanium Alloy Ti-6Al-4V

Secondary Machining Characteristics of Additive Manufactured Titanium Alloy Ti-6Al-4V

Study on machinability characteristics of novel additive manufactured titanium alloy (Ti-6Al-4V) fabricated by direct metal laser sintering

Machining of a functional hip prosthesis cone in TI-6AL-4V ELI titanium alloy produced by electron beam melting

Biomedical Applications of Titanium Alloys: A Comprehensive Review

Effect of Titanium Based Alloys on Thermo-Mechanical Behavior in 3D Forging Simulation

Titanium-Based alloys and composites for orthopedic implants Applications: A comprehensive review

Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review

Biocompatibility of Advanced Manufactured Titanium Implants—A Review

Overview of Machinability of Titanium Alloy (Ti6Al4V) and Selection of Machining Parameters

Advances in sustainable grinding of different types of the titanium biomaterials for medical applications: A review

Surface modification of Ti6Al4V alloy via advanced coatings: Mechanical, tribological, corrosion, wetting, and biocompatibility studies

A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications

Two novel titanium alloys for medical applications: Thermo-mechanical treatment, mechanical properties, and fracture analysis

Machinability evaluation of the finish hard turning α+β titanium alloys

Advancing Machinability of Ti-6Al-4V Alloy: A Sustainable Integrated Approach