Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The pressing demand of Ti-6Al-4V (grade 5) in aerospace, medical, marine, and chemical processing industries has gained momentum in recent years due to its excellent properties such as high strength to weight ratio and corrosion resistance, bio-compatibility and a common material for additive manufacturing. Additive manufactured Ti-6Al-4V have higher mechanical properties as compared to wrought alloys due to difference in microstructure that negatively influences the machinability characteristics and also lacks ductility. The main limitation of fabricated additive manufactured (AMed) component is the poor surface quality, staircase effect and adhering of non-melted powder particles to the fabricated components. Again, fatigue life of components increases with decrease of surface roughness. Therefore the need of machining of AMed titanium alloys in recent years are gaining importance to eliminate these problems so that desired surface quality and tolerances can be achieved. Therefore the objective of the study is to develop additive manufactured Ti-6Al-4V through direct metal laser sintering process and investigate its machinability characteristics under flood cooling environment with respect to responses as tool wear, surface roughness, cutting temperature, and chip morphology. As most of the heat generated at the interfaces has been carried away through flood cooling, the rate of growth of tool wear, cutting temperature, surface roughness, and degree of serration decreases and thus makes the performance of AMed Ti alloys are comparable with wrought Ti alloys. The dominant tool wear mechanism during machining AMed Ti alloy have been found to be abrasion, chipping, adhesion, BUE, chemical interaction between titanium and cutting tool materials, coating delamination. Optimal parameters for multi-responses are 0.1 mm depth of cut, 0.1 mm/rev feed rate, and 70 m/min cutting speed and improved. Mathematical models are said to be significant and fitted well. Because of the improved machinability, AMed Ti alloys find itself suitable in industrial applications.

Secondary Machining Characteristics of Additive Manufactured Titanium Alloy Ti-6Al-4V

Study on machinability characteristics of novel additive manufactured titanium alloy (Ti-6Al-4V) fabricated by direct metal laser sintering

Overview of Machinability of Titanium Alloy (Ti6Al4V) and Selection of Machining Parameters

Machinability Assessment of Titanium Alloy Ti-6Al-4V for Biomedical Applications

The State of the Art in Machining Additively Manufactured Titanium Alloy Ti-6Al-4V

Experimental Investigation of the Micro-Milling of Additively Manufactured Titanium Alloys: Selective Laser Melting and Wrought Ti6Al4V

A critical review of advanced techniques to improve machining of titanium alloy (grade 5)

Machining properties of as-built additive manufactured Ti6Al4V titanium alloy through selective laser melting: a comprehensive investigation

A Comprehensive Review on Machining of Titanium Alloys

Fabrication of Electron Beam Melted Titanium Aluminide: The Effects of Machining Parameters and Heat Treatment on Surface Roughness and Hardness

Evaluating Optimal Parameters for Machining Selective Laser Melting Titanium Alloy Using Wire Cut Electrical Discharge Machining

Evaluating productivity characteristics of laser engineered net shaping titanium alloy

A review on surface morphology and tribological behavior of titanium alloys via SLM processing

Advancing Machinability of Ti-6Al-4V Alloy: A Sustainable Integrated Approach

Machinability Performance of Single Coated and Multicoated Carbide Tools During Turning Ti6Al4V Alloy

An Experimental and Numerical Approach to Study the Performance of Modified Perforated Cutting Tools on Machining of Ti–6Al–4V Alloy

Drilling of titanium alloy (Ti6Al4V) – a review

Surface Integrity, Tool Wear, and Chip Morphology Studies in Spot Cooled Vibration Assisted Turning of Ti6Al4V Alloy

Machining of Spherical Component Fabricated by Selected Laser Melting, Part II: Application of Ti in Biomedical

Machining of titanium alloys for medical application - a review

Tool surface modification methodology to improve the machinability of Ti6Al4V through combination of micro-EDM texturing and AlSi-10Mg soft coating techniques in dry turning