Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

A theoretical model for bubble formation during horizontal gas injection into liquid flow in vertical tubes

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

A Dual-Scale Turbulence Model for Gas–liquid Bubbly Flows

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

Theoretical Study on Bubble Formation and Flow Condensation in Downflow Channel with Horizontal Gas Injection

Theoretical Model for Predicting Bubble Formation from Submerged Orifices

Modeling of Bubble Shape in Horizontal and Inclined Tubes

Theoretical study for bubble diameter prediction at detachment from an orifice in high liquid velocity cross-flow

Dynamics of bubbles detached from non-circular orifices: Confinement effect of orifice boundary

Modelling Horizontal Gas-Liquid Flow Using Averaged Bubble Number Density Approach

Multi-fluid Model for Laminar Bubbly Flow in a Vertical Pipe

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

CFD-PBM Approach with Modified Drag Model for the Gas–liquid Flow in a Bubble Column

The Modeling of Bubble Lift-Off Diameter in Vertical Subcooled Boiling Flow

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

Stability of Stratified Flow and Slugging in Horizontal Gas-Liquid Flow

A New Drag Force Model for the Wake Acceleration Effect and Its Application to Simulation of Bubbly Flow