Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Theoretical study for bubble diameter prediction at detachment from an orifice in high liquid velocity cross-flow

Interaction of Two In-Line Bubbles of Equal Size Rising in Viscous Liquid

Dynamics of bubbles detached from non-circular orifices: Confinement effect of orifice boundary

Theoretical Model for Predicting Bubble Formation from Submerged Orifices

Experimental and Numerical Study on the Formation and Detachment of Bubbles at Orifices under the Impinging Jet Flow

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

A theoretical model for bubble formation during horizontal gas injection into liquid flow in vertical tubes

The Modeling of Bubble Lift-Off Diameter in Vertical Subcooled Boiling Flow

Asymmetric Bubble Formation at Rectangular Orifices

A Computational Study of Bubble Formation from an Orifice Submerged in Liquid with Constant Gas Flow

Bubble Formation from a Submerged Orifice in a Thin Liquid Layer: Detachment and Bursting

Numerical Study on the Deformation of a Gas Bubble in Uniform Flow

The role of solid surface in bubble formation and detachment at a submerged orifice

Measuring and modeling detachment characteristics of onset bubbles via image processing

Coalescence Characteristics of Bubbles from Submerged Micron-Sized Double-Orifice Plates: Experiments and Modeling

Theoretical Study on Bubble Formation and Flow Condensation in Downflow Channel with Horizontal Gas Injection

Numerical Analysis of Single Pulsating Bubble Interaction with a Free Surface in a Viscous Compressible Liquid

A Model for the Prediction of Bubble Detachment Diameters in Vapor Compression Distillation Assembly

Modification of Flow Transition for a Vortex Ring by a Bubble Released at the Axis

A modified force balance model for predicting bubble departure diameter and lift-off diameter in subcooled flow boiling