Abstract:Subcooled boiling flow is widely used for heat and mass transfer in industries such as nuclear reactor, electronic equipment, and spacecraft, where the bubble dynamics is essential for understanding the gas-liquid flow behavior. Current studies focused on the gas void fraction or bubble size distribution at a global scale, but the dynamics of single bubbles are still obscure, which inhibits the fundamental understanding of gas-liquid flow and the precise prediction of heat transfer. Here, we develop a numerical method that captures the motion and condensation of bubbles in subcooled boiling flow using Euler-Lagrange method, with a proposed model for spatiotemporal lift-off bubble distribution on the heated wall as boundary condition. Our numerical method is validated by the agreement between the calculated gas void fraction distributions with the existing experimental data in vertical subcooled boiling flow. We further investigate the distribution of bubble position and size in the tube and find that the bubble size distribution shows different modes at different radial positions. Analysis of the single bubble dynamics shows that small and large bubbles suffer from centrifugal and centripetal lift forces, and thus tend to accumulate at a radial position near the wall and near the tube center, respectively, which reveals the mechanism of bubble size distribution. Besides, we find that the centripetal wall lubrication force is essential for the path instability of small bubbles near the wall. These findings promote the fundamental understanding of the gas-liquid phase distribution in the subcooled boiling flow and provide a numerical strategy for the precise prediction of mass and heat transfer in subcooled boiling flow.

A Model for the Prediction of Bubble Detachment Diameters in Vapor Compression Distillation Assembly

Modeling and parameter estimation of distillation vacuum system with a recovery device

Modelling of breakage rate and bubble size distribution in bubble columns accounting for bubble shape variations

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

Theoretical Model for Predicting Bubble Formation from Submerged Orifices

Theoretical study for bubble diameter prediction at detachment from an orifice in high liquid velocity cross-flow

A modified force balance model for predicting bubble departure diameter and lift-off diameter in subcooled flow boiling

Correlations for Prediction of the Bubble Departure Radius on Smooth Flat Surface During Nucleate Pool Boiling

A Fitting Formula for Predicting Droplet Mean Diameter for Various Liquid in Effervescent Atomization Spray

A Unified Relationship Between Bubble Departure Frequency and Diameter During Saturated Nucleate Pool Boiling

Modeling of vapor bubble dynamics considering the metastable fluid state

Measuring and modeling detachment characteristics of onset bubbles via image processing

Modeling the Distribution Characteristics of Vapor Bubbles in Cavitating Flows

The Modeling of Bubble Lift-Off Diameter in Vertical Subcooled Boiling Flow

Assessment of the Force-Balance Model in Predicting the Bubble Departure Diameter in Inclined Channels

Numerical Simulation Research of Bubble Characteristics and Bubble Departure Diameter in Subcooled Flow Boiling

A SIMPLIFIED FORCE-BALANCE MODEL TO PREDICT BUBBLE DEPARTURE DIAMETER IN HORIZONTAL FLOW BOILING

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Numerical prediction of breakup mode of contracting gas filament in liquid

Effect of Droplets on Water Vapor Compression Performance

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES