Abstract:<p>Recently, an increasing number of small satellites have chosen electric propulsion (EP) as the propulsion system for motion control in space flights. Research on the ejected high energy plasma plumes from EP thrusters has attracted significant interest due to their interactions with the components of satellites. This work demonstrates a probe array diagnostic platform (with 67 Faraday probes on the array) that enables the acquisition of the full three-dimensional morphology of the plume current density from the near-field to the far-field of EP stationary thrusters. The plume parameters of an ion thruster including the 3-D plume morphology, divergence angle, and thrust vector angle are measured using this diagnostic platform. From 250 to 700 mm from the thruster exit, the plume field exhibits a stable divergence angle of 43.6°. By fitting circles to the contours of each cut plane, the average thrust vector angle is calculated to be 1.3°, and the repeatability error for the circle center fitting is approximately 2.2%. The current density profiles on exit cut planes demonstrate an "elliptical distortion" phenomenon in the plume shape. Using the ellipse fitting method, it is found that an elliptical shape was formed in the near-field of the plume. As the plume propagates to the far-field, the distortion of the ellipse becomes more apparent (the aspect ratio is 1:1.14). Some possible causes may be the geo-magnetic field, background vacuum environment distribution, or thruster manufacturing error. The thrust vector data can provide a basis for the control strategy of the satellites. In addition, the 3-D plume current density data can give us a comprehensive understanding of the plume plasma physics. These results may also provide an accurate and rich database for parameters for future plume simulations.</p>

Measurement of Temperature and Density Profiles of the Plasma at PR-2 Facility

New Experimental Results Obtained using Microwave Reflectometry in HL-2 A Tokamak

Microwave Reflectometry for Plasma Density Profile Measurements on Hl-2a Tokamak

Observation of E × B Flow Velocity Profile Change Using Doppler Reflectometry in HL-2A

Measurement of Turbulence Propagation Velocity Using Doppler Reflectometer on HL-2A Tokamak

2d Electron Density Profile Measurement In Tokamak By Laser-Accelerated Ion-Beam Probe

Langmuir probe diagnostic suite in the C-2 field-reversed configuration

New millimeter-wave diagnostics to locally probe internal density and magnetic field fluctuations in National Spherical Torus Experiment-Upgrade (invited)

Electron temperature, ion density and energy influx measurements in a tubular plasma reactor for powder surface modification

Density profile measurement with a heavy ion beam probe in a toroidal plasma of the compact helical system

Electron density measurements in low-pressure plasmas using cutoff probes and comparison with hairpin and Langmuir probes

Plasma diagnostics in spherical tokamaks with silicon charged-particle detectors

Study of plasma parameters in high enthalpy ICP-heated wind tunnel by using single Langmuir probe

Plasma density distribution and its perturbation by probes in axially symmetrical plasma

Development of a high dynamic range retarding potential analyzer for electric propulsion plume diagnosis

Three-dimensional measurement of a stationary plasma plume with a Faraday probe array

Plasma probe characteristics in low density hydrogen pulsed plasmas

Sampling of Plasma Plume from Atmosphere into Vacuum for Reliable Langmuir Probe Diagnostics

Spatial measurement in rotating magnetic field plasma acceleration method by using two-dimensional scanning instrument and thrust stand

Portable Thomson scattering system for temporally resolved plasma measurements under low density conditions