Abstract:Ultrafiltration (UF) membranes with excellent dye removal and antibacterial activity are highly desired in dye wastewater treatment, and more importantly environmental protection puts high demands on polymeric membrane materials. In this work, three methacrylate copolymers containing quaternary ammonium salt were synthesized to cast UF membranes. The physicochemical property, structural evolution, dye separation, and antibacterial activity of as-prepared membranes were systematically investigated. With increased content of the hydrophilic monomer allyl polypropylene glycol (APPG) in the feed, the wettability and positive charge of the resultant membranes were enhanced. Remarkably, the supporting layer of membranes changed from finger-like pore structure to sponge-like pore structure by increasing APPG content, and the sponge-like membranes showed higher retention rates for dyes (99.78% for victoria blue B, 90.49% for methylene blue, and 97.43% for methyl blue) compared with the finger-like membranes. Besides, the sponge-like membranes exhibited high rejection for vctoria blue B (>99%) in dye/salt mixture and simultaneously low rejection for salts (<10%), indicating effective selective separation to dye/salt mixture, and also achieved easy regeneration. It was also found that increased hydrophilicity and positive charge endowed membranes with better antibacterial activity. This work will provide an alternative for dye/salt selective separation in dye effluent treatment.

Preparation of high permeable alumina ceramic membrane with good separation performance via UV curing technique

Preparation of a High-Performance Porous Ceramic Membrane by a Two-Step Coating Method and One-Step Sintering

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

Preparation and Application of Flat-Plate Ceramic Ultrafiltration Membrane with High-Performance by Spray-Dip Coating Method

Preparation of Ceramic Ultrafiltration Membrane by Nano-Metal Oxides Modified

One-step dip-coating method for preparation of ceramic nanofiber membrane with high permeability and low cost

High-flux ceramic membrane derived from UV-curable slurry for efficient separation of nanoparticles suspension

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Preparation of disc ceramic membrane by a printing and dip-coating method for oil-water separation

One-step fabrication of asymmetric alumina ceramic membranes with tunable pore parameters for oil-water separation

Compact SiOC Ceramic Composite Nanofiltration Membranes by Slow Dip Coating for Water Purification

Preparation and Characterization of Nanoporous Alumina As Ceramic Membrane Materials

Novel Fabrication Processing of Porous Al2O3/CaAl12O19 Membrane by Combining Emulsion, Cement Curing and Tape-Casting Methods

Preparation and Characterization of Porous Alumina Ceramic Membrane Support

The preparation of zeolite NaA membranes on the inner surface of hollow fiber supports

Asymmetric alumina-based ultrathin composite ceramic membranes with interfacial modification of black talc nanosheets

Melded Ceramic Membranes: A Novel Fabrication Method for Ultrathin Alumina Membranes of High Performance

Fabrication of alumina ceramic membrane supports using LCD 3D printing and titania nanoparticle doping

Progress in alumina ceramic membranes for water purification: Status and prospects

Preparation, Characterization and Properties of New Low Cost Multi-Channel Ceramic Membrane Tube for Water Treatment

Co-pressing and co-sintering preparation of cost-effective and high-performance asymmetric ceramic membrane for oily wastewater treatment