Abstract:The detection of ammonia (NH 3 ) is of significant importance across various industries and applications due to its potential impact on health, safety, the environment, and industrial processes. In the quest for efficient and selective gas sensing technologies, the synergy between poly(3,4-ethylenedioxythiophene) (PEDOT) and hybrid phase molybdenum disulfide (1 T-2H MoS 2 )/nitrogen-doped graphene (NGN) has emerged as a promising avenue. This study presents a novel approach to enhancing ammonia sensing capabilities through the integration of PEDOT with 1 T-2H MoS 2 /NGN. The PEDOT/1 T-2H MoS 2 /NGN nanocomposites were synthesized by a combination of solvothermal processing and in-situ polymerization techniques. The synthesized nanocomposites were characterized using X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and transmission electron microscopy (TEM) studies. The sensing behaviour of the fabricated devices has been analyzed in different chemical vapor environments including ammonia, methanol, ethanol, acetone, and chloroform at 100 ppm. The PEDOT/1 T-2H MoS 2 /NGN nanocomposite sensor has shown sensing response values of ~ 690, response time of 34 s, recovery time of 37 s, and estimated detection limit is 0.042 ppm (42 ppb) for ammonia. The PEDOT/1 T-2H MoS 2 /NGN sensor shows a linear gas response in a concentration range of 10–100 ppm of ammonia. Finally, The PEDOT/1 T-2H MoS 2 /NGN nanocomposite sensor development addresses the growing demand for reliable, cost-effective, and energy-efficient gas sensing technologies applicable in various fields, including environmental monitoring and industrial safety.

Room temperature ammonia gas sensing properties of MoS2 nanostructured thin film

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

Sub-ppt NH3 detection by MoS2@sulfur nanosheets

Preparation of MoS2 Nanospheres using a Hydrothermal Method and Their Application as Ammonia Gas Sensors Based on Delay Line Surface Acoustic Wave Devices

PEDOT/flower-like 1 T-2H MoS2/nitrogen-doped graphene ternary nanocomposite for efficient room temperature real-time monitoring of ammonia

Suspended SnS2 Layers by Light Assistance for Ultrasensitive Ammonia Detection at Room Temperature

TiO2-modified MoS2 monolayer films enable sensitive NH3 sensing at room temperature

Chemiresistive gas sensor based on Mo0.5W0.5S2 alloy nanoparticles with good selectivity and ppb-level limit of detection to ammonia

Flower-like MoS2 Hierarchical Architectures Assembled by 2D Nanosheets Sensitized with SnO2 Quantum Dots for High-Performance NH3 Sensing at Room Temperature

Chemiresistive Room Temperature H2S Gas Sensor Based on MoO3 Nanobelts Decorated with MnO2 Nanoparticles

Room-Temperature NH<sub>3</sub> Sensor Based on SnO<sub>2</sub> Quantum Dots Functionalized SnS<sub>2</sub> Nanosheets

MXene/MoS 2 nanosheet/polypyrrole for high-sensitivity detection of ammonia gas at room temperature

Room temperature gas sensors for NH3 detection based on the heterojunction of 2D Ti3C2Tx MXenes and Bi2S3

Room-temperature highly sensitive and selective NH3gas sensor using vertically aligned WS2nanosheets

Pt/MoS2/Polyaniline Nanocomposite as a Highly Effective Room Temperature Flexible Gas Sensor for Ammonia Detection

Rose-Like MoO<sub>3</sub>/MoS<sub>2</sub>/rGO Low-Temperature Ammonia Sensors Based on Multigas Detection Methods

Electrical Characterization and Ammonia Sensing Properties of MoS2/Si P–n Junction

MoS2-Templated Porous Hollow MoO3 Microspheres for Highly Selective Ammonia Sensing Via a Lewis Acid-Base Interaction

Thermal Annealing Induced Mazy Structure on MoO3 Thin Films and Their High Sensing Performance to NO Gas at Room Temperature

High-performance Ammonia Sensor at Room Temperature Based on 2D Conductive MOF Cu3(HITP)2

3D substoichiometric MoO3−x/EGaln framework for room temperature NH3 gas sensing