Abstract:For weak grid scenario with high new energy proportion, large fluctuations of load are prone to cause low-voltage ride through. Moreover, stator transient magnetic flux will cause overvoltage and overcurrent problems in the rotor of doubly fed induction generator. Based on model predictive control, a control strategy for transient flux linkage and reactive power compensation is proposed. Firstly, regarding the issue of reactive power allocation of grid side converters (GSC) and rotor side converters (RSC), an allocation strategy is derived under minimizing winding energy loss on case of low-voltage ride through, enabling the wind energy conversion system to provide reactive power support during grid voltage recovery process. Meanwhile, an improved mixed second- and third-order generalized integrator (MSTOGI) phase-locked loop (PLL) is used to extract the positive and negative sequence components of the power grid voltage, further for RSC control. Secondly, in response to power grid faults, considering the influence of stator DC transient flux and negative sequence flux components on rotor current, by injecting rotor transient compensation current and stator flux feedforward compensation into RSC, the rotor impulse voltage and loop current are reduced. Moreover, combined with model predictive control algorithm, a control strategy of rotor current is designed. Finally, a simulation platform is built to validate the effectiveness of the proposed method based on comparing with several traditional vector control low-voltage ride through methods.

Predictive Current Control of Boost Three-Level and T-Type Inverters Cascaded in Wind Power Generation Systems

Model-Free Predictive Current Control of a Multilevel Cascaded H-bridge inverter for Photovoltaic Systems

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

Control Strategy of Cascaded Multilevel Converter Based on Dual Active Bridge for Wind Energy Conversion System.

Control of A Stand-Alone Wind Energy Conversion System Via A Third-Harmonic Injection Indirect Matrix Converter

A Novel Model-Free Predictive Control for T-Type Three-Level Grid-Tied Inverters

Repetitive Control of the Stator-Side Four-Leg Converter in Stand-Alone Dfig-Based Wind Energy Conversion System

Discrete-time Predictive Control of Three-phase Boost Grid-connected Inverter

Improved Three-Vector Based Dead-Beat Model Predictive Direct Power Control Strategy for Grid-Connected Inverters.

Enhanced Control of DFIG-used Back-to-back PWM VSC under Unbalanced Grid Voltage Conditions

Novel DC Grid Connection Topology and Control Strategy for DFIG-based Wind Power Generation System

Continuous Control Set Model Predictive Control of a Hybrid Modular Multilevel Converter for Wind Energy Applications

A New Power Conversion System for Megawatt PMSG Wind Turbines Using Four-Level Converters and a Simple Control Scheme Based on Two-Step Model Predictive Strategy—Part I: Modeling and Theoretical Analysis

High performance of three-level T-type grid-connected photovoltaic inverter system with three-level boost maximum power point tracking converter

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

A Novel DC Grid Connected DFIG System with Active Power Filter Based on Predictive Current Control

Current-Prediction-Controlled Quasi-Z-Source Cascaded Multilevel Photovoltaic Inverter

Novel adaptive power control of a Direct-drive PM wind generation system in a micro grid

Model Predictive Control on Transient Flux Linkage and Reactive Power Compensation of Doubly Fed Induction Wind Generator

Boost Type Direct Drive Permanent Magnet Wind Generation System Without a DC Inductor

Adaptive Multi-Mode Power Control of A Direct-Drive Pm Wind Generation System in A Microgrid