Abstract:This paper presents a constant switching frequency (CSF) model predictive control (MPC) for a doubly-fed induction generator (DFIG)-based wind energy conversion system (WECS) in standalone and grid-connected operations. The system comprises a cascade connection of a rotor side converter (RSC) and a grid side converter (GSC) with a common DC-link. A battery energy storage system (BESS) is also connected to the common DC-link via a bi-directional dc–dc converter (BDDC). The RSC is controlled through CSF-model predictive current control (CSF-MPCC) scheme in both standalone mode (SAM) and grid-connected mode (GCM) of operations. The GSC control employs the CSF-MPCC scheme in grid-connected operation, whereas CSF-model predictive voltage control (CSF-MPVC) scheme is implemented in standalone operation. Moreover, the power balance is achieved by controlling the BDDC using MPCC to discharge or charge the BESS in response to surplus or deficient power generation. The effectiveness of the proposed control approach for DFIG-based WECS in both SAM and GCM is verified through MATLAB-based simulation and experimental results under different dynamic conditions like variable wind velocity changing from 12 m/s to 8 m/s, different grid demands from 3 kW to 1.5 kW and load change of 4 kW to 6.5 kW. Moreover, the robustness of the proposed control is corroborated by parametric sensitivity, time delay, and grid unbalance, along with its low-voltage ride-through (LVRT) capability during an LLLG fault.

Repetitive Control of the Stator-Side Four-Leg Converter in Stand-Alone Dfig-Based Wind Energy Conversion System

Control of DFIG Wind Power System under Unbalanced Grid Voltage

Enhanced Control of DFIG-used Back-to-back PWM VSC under Unbalanced Grid Voltage Conditions

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Control of A Stand-Alone Wind Energy Conversion System Via A Third-Harmonic Injection Indirect Matrix Converter

Independent Operation of DFIG-Based WECS Using Resonant Feedback Compensators under Unbalanced Grid Voltage Conditions

Enhanced operation for DFIG-based WECS using resonant feedback compensators under grid unbalance

Auto-disturbance Rejection Control for the Stator Voltage in a Stand-Alone DFIG-based Wind Energy Conversion System

Novel DC Grid Connection Topology and Control Strategy for DFIG-based Wind Power Generation System

Improved Control Scheme of Stand-Alone DFIG-based Wind Energy Conversion System with Battery Energy Storage System.

Coordinated control strategy of DFIG for balanced currents and constant torque during grid voltage unbalance

A Three-Level Neutral-Point-Clamped Converter Based Standalone Wind Energy Conversion System Controlled with a New Simplified Line-to-Line Space Vector Modulation

Improved control strategy of DFIG-based wind power generation systems connected to a harmonically polluted network

Control Strategy of Cascaded Multilevel Converter Based on Dual Active Bridge for Wind Energy Conversion System.

Improved Dual-Pi Rotor Current Control Scheme for a Wind-Driven DFIG During Asymmetrical Grid Voltage Dips

Direct Power Control on the DFIG Wind Turbine under Unbalanced Grid Voltage Conditions

A Simplified Stator Frequency and Power Control Method of DFIG-DC System Without Stator Voltage and Current Sensors

A Novel DC Grid Connected DFIG System with Active Power Filter Based on Predictive Current Control

Robust Control System for DFIG-Based WECS and Energy Storage in reel Wind Conditions

A robust control for a variable wind speed conversion system energy based on a DFIG using Backstepping

Development of constant switching frequency model predictive control for DFIG-based wind energy conversion system in standalone and grid connected operation