Abstract:Abstract In this paper, the performance of a permanent magnet synchronous generator (PMSG)-based wind energy conversion system (WECS) supplied to an uncontrolled rectifier-fed boost converter (BC) interfaced with a three-phase T-type three-level inverter (TLI) has been analysed. The proposed WECS involves three converters, namely an uncontrolled rectifier that is used for conversion from AC to DC; a BC supplied by a PMSG-fed rectifier used to enhance the voltage gain; and a grid-connected three-phase T-type TLI is proposed to eliminate power-quality issues with synchronization of grid voltage and current. The main goal of this research is to model and control the grid-connected T-type TLI using a d–q synchronous frame for wind energy for regulating the DC-link voltage and transferring the generated wind power from the BC to the grid. Furthermore, the perturb & observe (P&O)-based maximum power point (MPP) approach is recommended to keep track of the MPP for a BC that is supplied from a PMSG-based WECS under constant and variable wind speeds. The proposed PMSG-based WECS interfaced with grid-connected T-type TLI using d–q control has been computationally modelled, simulated and validated with constant and variable speeds using MATLAB® and Simulink®. It is confirmed that the P&O-based MPP approach ensures maximum power for varying wind speeds, and the total harmonic distortion of the T-type TLI grid current value is 3.18%, which is within IEEE-519 limits. Furthermore, with grid synchronization, the power factor of the T-type TLI is maintained at unity to avoid power-quality issues.

A New Power Conversion System for Megawatt PMSG Wind Turbines Using Four-Level Converters and a Simple Control Scheme Based on Two-Step Model Predictive Strategy—Part I: Modeling and Theoretical Analysis

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Application of Modular Multilevel Converter in Medium Voltage High Power Permanent Magnet Synchronous Generator Wind Energy Conversion Systems

A Power Conversion System for PMSG-based WECS Operating with Fully-Controlled Current-Source Converters.

Sensorless Control of Pmsg Based on Dual Two-Level Inverter Open Winding Configuration for Wind Turbines

A Survey on Model Predictive Control of DFIGs in Wind Energy Conversion Systems

Improved load-adaptive control strategy for PMSG based stand-alone wind energy generation system

A Low Voltage Ride Through Control Strategy for PMSG Based on Electromechanical Energy Storage

Control Strategy of Cascaded Multilevel Converter Based on Dual Active Bridge for Wind Energy Conversion System.

Model Predictive Control Of Semi-Controllable Open Winding Pmsg Based On Three Level Npc Converter

Research on the unit power factor control of directly-driven PM wind generator

A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems

Repetitive Control of the Stator-Side Four-Leg Converter in Stand-Alone Dfig-Based Wind Energy Conversion System

A Reliable Medium-Voltage High-Power Conversion System for MWs Wind Turbines

Wind energy conversion system using perturb & observe-based maximum power point approach interfaced with T-type three-level inverter connected to grid

Control Strategies for Permanent Magnet Synchronous Generator-Based Wind Turbine with Independent Grid-Forming Capability in Stand-Alone Operation Mode

Analysis and Performance Of Grid Connected Straight Driven Pmsg Based Wind Turbines

Transformer-less Five-Level High-Voltage Full-Scale Converter with a Self-Balance Auxiliary Circuit for 10MW Wind Turbines

Power Converter Technologies for 20MW Wind Turbines

A Three-Level Neutral-Point-Clamped Converter Based Standalone Wind Energy Conversion System Controlled with a New Simplified Line-to-Line Space Vector Modulation

Continuous Control Set Model Predictive Control of a Hybrid Modular Multilevel Converter for Wind Energy Applications