Abstract:The power conversion systems for large wind turbines are facing a great challenge as today's wind turbine power outputs approach 5 MW and above. The conventional low voltage power conversion system will suffer from a high transmission current, which significantly increases losses and cost of the cables as well as voltage drop. This paper proposes a modular, medium voltage, high-power converter topology for the large permanent magnet wind generator system, eliminating the grid-side step-up transformer, which is desirable for both onshore and offshore wind turbines. The converter modules are cascaded to achieve medium voltage output. Each converter module is fed by a pair of generator coils with 90 degrees phase shift to get the stable dc-link power. The power factor correction (PFC) circuit enables the generator to achieve unity power factor operation and the generator armature inductance is used as ac-side PFC boost inductance. At the grid-side, H-bridge inverters are connected in series to generate multilevel medium voltage output and the voltage-oriented vector control scheme is adopted to regulate the converter active and reactive power transferred to the grid. Simulation results with a 2-MW wind turbine system and experimental results with a down-scaled 3-kW system validate the proposed topology and control methods. The proposed system can successfully deliver power from the wind generator to the grid.

Boost Type Direct Drive Permanent Magnet Wind Generation System Without a DC Inductor

Modeling and control of the wind turbine with the Direct Drive Permanent Magnet Generator integrated to power grid

Feasibility research on DC generator based wind power generation system

Unit Power Factor Control of Direct-Drive Permanent Magnet Wind Generator

A Modular Direct-Drive Permanent Magnet Wind Generator System Eliminating the Grid-Side Transformer

Research on Direct-drive Wind Generation Power Converter Control Without PMSG Parameters

Cascaded Single Phase PFC Rectifier Pair for Permanent Magnet Wind Generation System

A Transformerless Modular Permanent Magnet Wind Generator System with Minimum Generator Coils

Design and Implementation of Wind Turbine Imitation System for Direct Drive Permanent Magnet Synchronous Generator Using DC Motor

Control of A Stand-Alone Wind Energy Conversion System Via A Third-Harmonic Injection Indirect Matrix Converter

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

High Power Cascaded Converter for Multi-coil Permanent Magnet Wind Generator System

Predictive Current Control of Boost Three-Level and T-Type Inverters Cascaded in Wind Power Generation Systems

Complementary half controlled converter for directly-driven PM synchronous generator in wind power generation application

An Improved Boost-Type Hybrid Converter with Multiple Outputs

A novel control strategy of wind turbine MPPT implementation for direct-drive PMSG wind generation imitation platform

Improved Direct Power Control of a Wind Turbine Driven Doubly Fed Induction Generator During Transient Grid Voltage Unbalance

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation

A Transformer-Less High-Power Converter for Large Permanent Magnet Wind Generator Systems

Research on the unit power factor control of directly-driven PM wind generator

Design Aspects for Permanent Magnet Superconducting Wind Power Generators