Abstract:Macroscopic fibers of carbon nanotubes (CNT) have emerged as an ideal architecture to exploit the exceptional properties of CNT building blocks in applications ranging from energy storage to reinforcement in structural composites. Controlled synthesis and scalability are amongst the most pressing challenges to further materialize the potential of CNT fibers. This workshows that under floating catalyst chemical vapor conditions in the direct spinning method, used both in research and industry,the ceramic reactor tube plays an unsuspected active role in CNT growth, leading for example to doubling of reaction yield when mullite (Al4+2xSi2-2xO10-x(x = 0.4)) is used instead of alumina (Al2O3), but without affecting CNT morphology in terms of number of layers, purity or degree of graphitization. This behaviour has been confirmed for different carbon sources andwhen growing either predominantly single-walled or multi-walled CNTs by adjusting promotor concentration. Analysis of large Si-based impurities occasionally found in CNT fiber fabric samples, attributed to reactor tube fragments that end up trapped inthe porous fibers, indicate that the role of the reactor tube is in catalyzing the thermal decomposition of hydrocarbons, which subsequently react with floating Fe catalyst nanoparticles and produce extrusion of the CNTs and formation of an aerogel. Reactor gas analysis confirms that extensive thermal decomposition of the carbon source occurs in the absence of Fe catalystparticles, and that the concentration of different carbon species (e.g. carbon dioxide and ethylene) is sensitive to the reactor tube type. These finding open new avenues for controlled synthesis of CNT fibers by decoupling precursor decomposition from CNT extrusion at the catalyst particle.

Carbon nanotubes and carbon nanobeads synthesis by one-pot chemical vapor deposition method: morphology and crystallinity

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

Temperature Selective Growth Of Carbon Nanotubes By Chemical Vapor Deposition

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

Thermal CVD Synthesis of Carbon Nanotubes Filled with Single-Crystalline Cu Nanoneedles at Tips

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Mechanism of Carbon Nanotube Growth in a Nano-agglomerate Fluidized Bed

Carbon nanotube synthesis and spinning as macroscopic fibers assisted by the ceramic reactor tube

Fabrication and Growth Mechanism of Carbon Nanotubes by Chemical Vapor Deposition

In Situ Fabrication of Carbon Nanotube/Mesocarbon Microbead Composites from Coal Tar Pitch

Catalytic Chemical Vapor Deposition of Methane to Carbon Nanotubes: Copper Promoted Effect of Ni/MgO Catalysts

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

Buliding microstructures of organized carbon nanotubes by chemical vapor deposition

Growth of Carbon NanoStructures in Ceramic Materials

Carbon Nanotubes Synthesized By Rapid Quenching Of Red-Hot Graphite Rod In Ethyl Alcohol

TEM Investigation on the Growth Mechanism of Carbon Nanotubes Synthesized by Hot-Filament Chemical Vapor Deposition.

Carbon nanotubes grown by gas source molecular beam epitaxy

Gas-induced formation of Cu nanoparticle as catalyst for high-purity straight and helical carbon nanofibers.

Synthesis of Aligned Carbon Nanotubes by Thermal Chemical Vapor Deposition

Synthesis and Characterization of Well-Aligned Carbon Nitrogen Nanotubes by Microwave Plasma Chemical Vapor Deposition