Abstract:Ignition delay times for n-hexane oxidation have been measured in a rapid compression machine (RCM) at stoichiometric conditions and at 15 bar. Due to the high reactivity of n-hexane and non-ideal experimental effects associated with measuring short ignition delay times in the RCM (i.e. under 5 ms), further experiments were performed in a high-pressure shock tube for multiple fuel mixtures at equivalence ratios of φ = 1 and φ = 2 over the temperature range of 627–1365 K at pressures of 15 and 32 bar. To further study the concentration of intermediate species during the oxidation process, experiments have also been carried out in a jet-stirred reactor over a wide temperature range of 530–1160 K at 10 atm pressure and at equivalence ratios of φ = 0.5, 1.0 and 2.0. Species which include reactants, intermediates and products were identified and quantified as a function of temperature. These experimental results were used to aid the development and validation of a detailed kinetic model. The low-temperature chemistry of n-hexane has been refined by adopting alternative isomerization reactions for peroxyl alkylhydroperoxide (O˙2QOOH) radicals, leading to more detailed chemistry for this type of intermediate with multiple product channels. This mechanism has adopted a series of new reaction rates and rate rules mostly from recently reported high-level calculations. Slight modifications have been made to the suggested reaction rates and rate rules within their reported uncertainty ranges to achieve better agreement with the experimental results for both ignition delay times and speciation measurements. The new model has been validated against the experimental data presented here, with an overall good agreement compared to the experimental results. The molecular structure of n-hexane is more representative of normal alkanes that may be found in transportation relevant fuels (e.g. gasoline) compared to those with shorter carbon chains which is important in developing a robust sub-mechanism of base chemistry for larger, more practical fuels. Since the modified reaction rate rules presented in this work have shown to successfully predict the oxidation kinetics of n-hexane, these rate rules could be the basis for the development of mechanisms for even larger normal alkanes that are more representative of diesel and jet fuels. As a further demonstration of the utility of the rate rules they are shown to predict well ignition delay times and species concentrations measured at low temperature for n-heptane oxidation from previous studies.

A Detailed Kinetic Mechanism of Multistage Oxidation and Combustion of Octanes

Development of a Highly Compact and Robust Chemical Reaction Mechanism for the Oxidation of Tetrahydrofurans under Engine Relevant Conditions

A Comprehensive Modeling Study of n-Heptane Oxidation

Oxidation of 2,6-dimethylheptane at low temperature: Kinetic modeling and experimental study

An Experimental and Kinetic Modeling Study of Premixed Laminar Flames of Methyl Pentanoate and Methyl Hexanoate

An updated experimental and kinetic modeling study of n-heptane oxidation

Comprehensive Experimental and Kinetic Study of 2,4,4-Trimethyl-1-pentene Oxidation

Computer-aided design of gas-phase oxidation mechanisms—Application to the modeling of n-heptane and iso-octane oxidation

An experimental and kinetic modeling study of n -hexane oxidation

Laminar flame speeds and oxidation kinetics of iso-octane-air and n-heptane-air flames

A Detailed Chemical Kinetic Reaction Mechanism for Oxidation of Four Small Alkyl Esters in Laminar Premixed Flames

Revisiting low temperature oxidation chemistry of n-heptane

Experimental and Numerical Study of the Oxidation of Propylene Oxide in an Isothermal Jet-Stirred Reactor

Reduced Kinetic Model for Complex Turbulent n-Heptane Flame Simulations

Chemical Kinetic Mechanism of A Three-Component Fuel Composed of Iso-Octane/N-Heptane/Ethanol

A Detailed Chemical Mechanism for Low to High Temperature Oxidation of N-Butylcyclohexane and Its Validation

Can an isolated iso-octane droplet undergo multi-stage auto-ignition in air?

An experimental and chemical kinetic modeling study of octane isomer oxidation. Part 2: 223- and 224-trimethylpentane

Laminar flame speeds, non-premixed stagnation ignition, and reduced mechanisms in the oxidation of iso-octane

High-temperature Oxidation Kinetics of Iso-Octane/n-butanol Blends-Air Mixture

Revealing the Oxidation Kinetics of N-Dodecane, Ethylcyclohexane and N-Butylbenzene Blended Fuels