Abstract:In the context of Oxy-fuel combustion, there is a strong industrial interest in highly fuel-rich flames, characterized by an equivalence ratio (Φ) exceeding 2.5, for the production of H 2 -CO-rich synthesis gas. The validation of existing chemical reaction mechanisms for this specific regime pose a significant challenge due to the scarcity of experimental data for this particular range of equivalence ratio. The scope of this study was therefore the determination of the laminar burning velocity s L of ultra-rich CH 4 -O 2 flames under varying conditions, such as high equivalence ratios and preheating temperatures using the heat flux burner method. The laminar burning velocity was determined for equivalence ratio within the range of 2.3 < Φ < 3.6 and preheating temperature ranging from 300 K to 455 K. Additionally, the impact of the of reducing the oxygen content in the oxidizer on s L was investigated by argon addition in molar percentages ranging from 40 % to 100 %. The results of our study reveal laminar burning velocities ranging from 5 cm/s to 45 cm/s for pure oxy-fuel CH 4 flames. Preheating is shown to increase s L and this effect can be represented by a power law correlation s L = s L,0 (T/T 0 ) α with α = 1.53. Furthermore, the dilution of the oxidizer with argon leads to a significant decrease in s L of approximately 50 % compared to pure oxy-fuel flames. It is worth noting that detailed reaction mechanisms in combination with molecular transport data are typically not validated within the selected equivalence ratio range. To assess the performance of such reaction schemes in predicting laminar burning velocity under the specified selected conditions, we evaluated 13 different reaction mechanisms sourced from the literature. We compared the laminar burning velocities obtained through calculations of laminar premixed 1D flames and, additionally compared these with experimental data. A sensitivity analysis of the laminar burning velocity were carried out for selected mechanisms. Among the mechanisms, the CalTech2.3 mechanism exhibited the most consistent and accurate performance, particularly at high equivalence ratios.

Laminar flame speeds, non-premixed stagnation ignition, and reduced mechanisms in the oxidation of iso-octane

Laminar flame speeds and oxidation kinetics of iso-octane-air and n-heptane-air flames

Comparative Research on Laminar Flame Propagation for Four C8 Fuels

Experimental and Modeling Study of Laminar Flame Speed and Non-Premixed Counterflow Ignition of N-Heptane

Laminar Flame Propagation and Nonpremixed Stagnation Ignition of Toluene and Xylenes

Laminar Flame Propagation of Atmospheric Iso-Cetane/air and Decalin/air Mixtures

Measurements of laminar and turbulent flame propagation of iso-octane/air and iso-cetane/air mixtures at elevated pressures and temperatures

Laminar premixed flame propagation and non premixed ignition of toluene and xylenes

Experimental and Kinetic Study of 2,4,4-Trimethyl-1-pentene and Iso-Octane in Laminar Flames

Study on Laminar Burning Characteristics of Premixed High-Octane Fuel−Air Mixtures at Elevated Pressures and Temperatures

Experimental and chemical kinetic study on the laminar flame characteristics of the blends of n-propanol and isooctane at elevated temperature and pressure

Laminar Flame Speeds of C5 to C8 N-Alkanes at Elevated Pressures and Temperatures

Laminar Flame Characteristics of Iso-Octane/n-butanol Blend–Air Mixtures at Elevated Temperatures

An experimental and computational study of the burning rates of ultra-lean to moderately-rich H2/O2/N2 laminar flames with pressure variations

Non-premixed Ignition, Laminar Flame Propagation, and Mechanism Reduction of N-Butanol, Iso-Butanol, and Methyl Butanoate

Experimental and numerical investigations of the laminar burning velocities of premixed fuel-rich methane oxy-fuel and oxygen-enhanced flames

Experimental determination of counterflow ignition temperatures and laminar flame speeds of C2–C3 hydrocarbons at atmospheric and elevated pressures

Laminar Flame Speeds, Counterflow Ignition, and Kinetic Modeling of the Butene Isomers

Experiment and Numerical Investigation on Counterflow Twin-flame of Isooctane/Air

High-pressure Laminar Flame Speeds and Kinetic Modeling of Carbon Monoxide/hydrogen Combustion

Laminar Flame Speeds of C5 to C8 N-Alkanes at Elevated Pressures: Experimental Determination, Fuel Similarity, and Stretch Sensitivity