Optical investigation of the influence of high-reactivity iso-octane turbulent jet ignition on the combustion characteristics of ammonia/air mixtures
Yuhao Liu,Yu Liu,Fangxi Xie,Yan Su,Zhongshu Wang,Bin Wang,Xiaoping Li
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122489
IF: 6.4
2024-01-24
Applied Thermal Engineering
Abstract:Ammonia has attracted considerable attention as a zero-carbon fuel; however, challenges such as ignition difficulty and slow flame propagation persist. These challenges can be addressed by employing a highly reactive fuel in the pre-chamber to initiate the ignition of ammonia. This work aims to experimentally investigate the influence of pre-chamber fuel composition and concentration on ammonia combustion characteristics across various equivalence ratios. The results are as follows: elevating iso-octane equivalence ratios in the pre-chamber enhances stoichiometric ammonia combustion characteristics, reducing ignition delay and burn duration. However, excessive values result in significant delays and a decrease in flame speed. At an iso-octane equivalence ratio of 0.8, the main chamber exhibited the shortest combustion duration. By utilizing the optimal pre-chamber total equivalence ratios of 2.0 and 2.3, the ammonia lean combustion limit was achieved at an excess air ratio of 1.89 under experimental conditions (0.8 MPa, 440 K). As main chamber equivalence ratios decreased, ignition delay shortened. The pre-chamber total equivalence ratios exert a more pronounced impact on the main chamber ignition delay. In contrast, the main chamber equivalence ratios substantially influence the middle and later stages of combustion.
energy & fuels,engineering, mechanical,thermodynamics,mechanics