A skeletal mechanism for premixed flames of isooctane/2-methylfuran blends

Atmadeep Bhattacharya

DOI: https://doi.org/10.1080/13647830.2021.1970231

2019-12-03

Abstract:A skeletal chemical kinetic mechanism containing 252 species and 1288 reactions for the simulation of premixed flames involving isooctane (representing gasoline) and 2MF blends has been proposed in the present work.

Chemical Physics

What problem does this paper attempt to address?

Direct numerical simulations of rich premixed turbulent n-dodecane/air flames at diesel engine conditions

Savard Bruno,Wang Haiou,Wehrfritz Armin,Hawkes Evatt R.

DOI: https://doi.org/10.1016/j.proci.2018.08.022

IF: 6.535

2019-01-01

Proceedings of the Combustion Institute

Abstract:Rich premixed turbulent n-dodecane/air flames at diesel engine conditions are analyzed using direct numerical simulations. The conditions correspond to a parametric variation of the Engine Combustion Network Spray A (pressure 60 atm; oxidizer oxygen level and temperature 21% and 900 K, respectively; fuel temperature 363 K). Three simulations with equivalence ratios of 3, 5, and 7 are performed with a Karlovitz number (Ka, based on flame time) of order 100 to match the estimated Ka of the rich premixed combustion region in Spray A. At these conditions, the reference laminar flames exhibit a complex structure which involves both low-temperature chemistry (LTC) and high-temperature chemistry over a wide range of length scales. In the presence of turbulence, the flame structure is strongly affected in physical space and the reaction zone exhibits a very complex structure in which broken, distributed, and thin regions co-exist, especially for the leanest case. However, the contribution of the LTC pathway is only weakly affected by turbulence. In progress variable space, the mean flame structure, including the chemical source terms, is found to match remarkably well that of the corresponding unity Lewis number laminar flame, particularly for the ϕ= 3 and 5 cases. This behavior is attributed to the strong turbulent mixing occurring throughout the flames/reaction zones, which suppresses differential diffusion effects. Nevertheless, large conditional fluctuations around the mean chemical source terms are identified. These are found to correlate very well with radical species mass fractions such as OH. In addition, a similar functional dependence is obtained from counterflow laminar flames. As such, it appears from these results that laminar flame models have a potential to be used to represent the thermochemical state of rich premixed turbulent flames under diesel engine conditions.
Chemical Kinetic Mechanism of A Three-Component Fuel Composed of Iso-Octane/N-Heptane/Ethanol

Bei-Jing Zhong,Dong Zheng

DOI: https://doi.org/10.1080/00102202.2012.739223

IF: 1.9

2013-01-01

Combustion Science and Technology

Abstract:A chemical kinetic mechanism for a three-component fuel composed of iso-octane/n-heptane/ethanol has been developed. The mechanism consists of 51 species and 204 elementary reactions. Two elementary reactions that significantly affect laminar flame speed are subjected to sensitivity analysis. The validated results show that the predictions using the present mechanism are in good agreement with the experimental ignition delay time and laminar flame speed. Both the chemical reaction and the transportation process are accurately reproduced by the simulation using the present model in iso-octane/air premixed flames and in n-heptane/air counterflow partially premixed flames. The chemical kinetic mechanism is applicable to multidimensional computational fluid dynamics simulations of the combustion of gasoline surrogates or the cocombustion of primary reference fuels (PRF) with ethanol because of its smaller number of species and fewer reactions.
A compact skeletal mechanism for n-dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations

Tong Yao,Yuanjiang Pei,Bei-Jing Zhong,Sibendu Som,Tianfeng Lu,K.H. Luo

DOI: https://doi.org/10.1016/j.fuel.2016.11.083

IF: 7.4

2017-01-01

Fuel

Abstract:A skeletal mechanism with 54 species and 269 reactions was developed to predict pyrolysis and oxidation of n-dodecane as a diesel fuel surrogate involving both high-temperature (high-T) and low-temperature (low-T) conditions. The skeletal mechanism was developed from a semi-detailed mechanism developed at the University of Southern California (USC). Species and reactions for high-T pyrolysis and oxidation of C5-C12 were reduced by using reaction flow analysis (RFA), isomer lumping, and then merged into a skeletal C0-C4 core to form a high-T sub-mechanism. Species and lumped semi-global reactions for low-T chemistry were then added to the high-T sub-mechanism and a 54-species skeletal mechanism is obtained. The rate parameters of the low-T reactions were tuned against a detailed mechanism by the Lawrence Livermore National Laboratory (LLNL), as well as the Spray A flame experimental data, to improve the prediction of ignition delay at low-T conditions, while the high-T chemistry remained unchanged. The skeletal mechanism was validated for auto-ignition, perfectly stirred reactors (PSR), flow reactors and laminar premixed flames over a wide range of flame conditions. The skeletal mechanism was then employed to simulate three-dimensional turbulent spray flames at compression ignition engine conditions and validated against experimental data from the Engine Combustion Network (ECN).
A skeletal mechanism for gasoline surrogates: Development, validation, and CFD application

Seokwon Cho,Dario Lopez-Pintor,Aimilios Sofianopoulos

DOI: https://doi.org/10.1016/j.fuel.2022.126236

IF: 7.4

2023-01-15

Fuel

Abstract:In this study, a skeletal chemical kinetic mechanism for gasoline surrogates is developed from a detailed mechanism by applying several reduction techniques. Directed relation graph (DRG) routines and DRG-aided sensitivity analysis methods are applied with worst-case error tolerances equal to 30% and 40%, respectively. Issues with reaction dead-ends in the oxidation paths are resolved by adding adequate intermediate species and reactions. Sensitivity analyses are conducted to identify the most impactful fuel-dependent reactions to ignition delay, and the specific reaction rates of such reactions are optimized to replicate the ignition behavior of detailed mechanism. The final version of the skeletal mechanism consists of 152 species and 563 reactions including NOx chemistry. Experiments are carried out in Sandia's low-temperature gasoline combustion research engine with an E10 regular-grade gasoline, termed RD5-87, and the results are replicated in 0D simulations with good accuracies using both detailed mechanism and the skeletal mechanism although a slight over-estimation of the low-temperature heat release is observed. Finally, the performance of the skeletal mechanism is also tested in 3D CFD simulation using LES. Simulations are able to predict the pressure evolution and heat release rate, proving that the proposed skeletal mechanism is adequate for simulations.

energy & fuels,engineering, chemical
An Experimental and Kinetic Modeling Study of Premixed Laminar Flames of Methyl Pentanoate and Methyl Hexanoate

Oleg P. Korobeinichev,Ilya E. Gerasimov,Denis A. Knyazkov,Andrey G. Shmakov,Tatyana A. Bolshova,Nils Hansen,Charles K. Westbrook,Guillaume Dayma,Bin Yang

DOI: https://doi.org/10.1515/zpch-2014-0596

2015-01-01

Abstract:Detailed chemical structures of stoichiometric and rich premixed laminar flames of methyl pentanoate and methyl hexanoate were investigated over a flat burner at 20 Torr and for methyl pentanoate at 1 atm. Molecular beam mass spectrometry was used with tunable synchrotron vacuum ultraviolet (VUV) photoionization for low pressure flames of both methyl pentanoate and methyl hexanoate, and soft electron-impact ionization was used for atmospheric pressure flames of methyl pentanoate. Mole fraction profiles of stable and intermediate species, as well as temperature profiles, were measured in the flames. A detailed chemical kinetic high temperature reaction mechanism for small alkyl ester oxidation was extended to include combustion of methyl pentanoate and methyl hexanoate, and the resulting model was used to compare computed values with experimentally measured values. Reaction pathways for both fuels were identified, with good agreement between measured and computed species profiles. Implications of these results for future studies of larger alkyl ester fuels are discussed.
SKELETAL MECHANISM CONSTRUCTION FOR METHYL OLEATE IN REAL BIODIESEL FUELS

Han,Han Li,Wenming Yang

DOI: https://doi.org/10.46855/energy-proceedings-1667

2020-01-01

Abstract:A skeletal mechanism with 133 species and 877 reactions for MOD9D (one of the main unsaturated methyl esters in biodiesel fuels) is constructed by using decoupling methodology. The obtained skeletal mechanism consists of four parts: high temperature decomposition, low temperature oxidation, ester group reactions and detailed chemistry of small species. Extensive validations are firstly performed against available experimental data in shock-tube for autoignition delay. The predicted results by the skeletal mechanism matches well with the experiment results. The comparison has been conducted between the detailed mechanism and a semi-detailed mechanism. Good agreement or even better predictions at some initial conditions has been observed. Further validations are conducted against the experimental data of fuel species’ conversion rate and species concentration in PSR at varying initial temperatures. The results indicate that the developed skeletal mechanism is capable of predicting the combustion characteristics of MOD9D.
Developing a New Skeletal Mechanism for Propane, Butane, and LPG Fuels

Ozan Tekin,Ramin Barzegar,Mehmet Sait Soylemez

DOI: https://doi.org/10.1080/00102202.2024.2361086

IF: 1.9

2024-05-31

Combustion Science and Technology

Abstract:This study aimed at developing a new skeletal mechanism for LPG fuel capable of predicting combustion in a wide range of engine operating conditions with high fidelity. A novel reduction schematic was developed and applied to the Lawrence Livermore National Laboratory (LLNL) detailed mechanism (980 species, 4972 reactions) concerning NOx and soot formation as well. A two-level reduction method was used in which each level included Direct Relation Graph Error Propagation (DRGEP), DRGEP with isomer lumping, and DRGEP with sensitivity analysis. As a result, the skeletal mechanism was obtained with 88 species and 727 reactions and was successfully verified by comparing the results of the ignition delay/temperature and laminar flame speed/equivalence ratio for the combustion of propane, butane, and fuel mixture (90% propane/10% butane) with the experimental data. The obtained discrepancy of the ignition delay/temperature curves for the fuel mixture was around 5%. Additionally, a zero-dimensional engine calculation was conducted, and the results indicated that the mechanism was successful in predicting the engine combustion pressure with an error of around 5%.

energy & fuels,engineering, chemical,thermodynamics, multidisciplinary
A Detailed Kinetic Mechanism of Multistage Oxidation and Combustion of Octanes

V. Ya. Basevich,A. A. Belyaev,S. N. Medvedev,S. M. Frolov,F. S. Frolov

DOI: https://doi.org/10.1134/s1990793118030223

IF: 1.296

2018-05-01

Russian Journal of Physical Chemistry B

Abstract:This study has been focused on the construction of a generalized detailed kinetic mechanism of oxidation and combustion of isoheptane and isooctanes (2-methylhexane, 2-methylheptane, 2,2-dimethylhexane, and 2,2,4-trimethylpentane) to describe both high-temperature reactions and the low-temperature multistage process with separated stages of “cool,” “blue,” and “hot” flames. In accordance with the proposed mechanism, a numerical simulation of autoignition and flame propagation in homogeneous fuel–air mixtures and liquid droplet combustion has been conducted; the calculation results have been compared with the experimental data. Satisfactory qualitative and quantitative agreement of the calculation and experimental results has been obtained.

physics, atomic, molecular & chemical
Optimized Skeletal Models of Butane Combustion

YX Xin,D Sheen,H Wang,Chung King Law

2013-01-01

Abstract:Skeletal reaction models for n-butane and iso-butane combustion are derived from the detailed gas phase chemistry model of USC Mech II through directed relation graph (DRG) and DRG aided sensitivity analysis (DRGASA) methods. The skeletal models generated from various combustion systems, eg auto-ignitions versus premixed flames, n-butane versus i-butane, are compared, and analyzed based on the temperature and species profiles during ignition and within the flames. The reduced models are further optimized through the method of uncertainty minimization by polynomial chaos expansion (MUM-PCE) to enhance model performances. The uncertainty of the optimized model is quantified by the spectral expansion technique, exploring the relationship between the model size and uncertainty.
Development of a Skeletal Mechanism for Aviation Kerosene Surrogate Fuel

Bei-Jing Zhong,Hui-Sheng Peng

DOI: https://doi.org/10.2514/1.b37421

2019-01-01

Journal of Propulsion and Power

Abstract:In this study, a kerosene surrogate model fuel containing 65 mol % n-dodecane, 10% n-tetradecane, and 25% decalin is developed by considering both the physical and chemical characteristics of practical aviation kerosene. By combining the skeletal C-0-C-4 (carbon number) core mechanism and the reduced large hydrocarbon submechanisms, a high-temperature chemical kinetic mechanism including 50 species and 274 reactions is constructed for the kerosene surrogate model fuel. This relatively small size enables the application of computational fluid dynamics. The performance of the skeletal mechanism is validated by examining various experimental laminar flame speeds of single components, mixtures, and practical kerosene. Asensitivity analysis of the laminar flame speed based on the constructed mechanism shows that the flame propagation of the kerosene is strongly dependent on the C-0-C-3 kinetics, and it is independent of the fuel-specific species and reactions.
A new skeletal kinetic model for methanol/ n-heptane dual fuels under engine-like conditions

Shuqi Liu,Ting Sun,Lei Zhou,Ming Jia,Wanhui Zhao,Haiqiao Wei

DOI: https://doi.org/10.1016/j.energy.2022.125648

IF: 9

2022-10-23

Energy

Abstract:In dual-fuel engines, diesel is typically used to initiate the ignition of methanol, resulting in a turbulent spray flame. However, the lack of skeletal or reduced mechanisms for methanol/n-heptane blends limits the further research of dual-fuel combustion. Therefore, a skeletal methanol/n-heptane mechanism including 52 species and 182 reactions was proposed based on the decoupling method. Firstly, it was validated by the recent experiments for blends and compared with several mechanisms. Good agreement between the predicted and measured results was obtained in terms of the ignition delay time, laminar flame speed, and species distributions for pure n-heptane and methanol as well as blends. The new mechanism shows improvements on the negative temperature coefficient (NTC) behavior and the low-temperature ignition for blends compared with other mechanisms. Secondly, the effect of methanol on n-heptane decomposition was investigated based on kinetic analysis. Results showed that methanol competes OH with n-heptane at low temperatures, mainly prolonging the second-stage ignition process. At high temperatures, more HO 2 was produced via CH 3 OH→CH 2 OH→CH 2 O + HO 2 . The existence of methanol also removes the NTC regime toward lower temperatures at intermediate temperatures. Methanol/n-heptane dual fuels no longer exhibit NTC behaviors with high concentration methanol.

energy & fuels,thermodynamics
A skeletal chemical reaction mechanism for gasoline-ABE blends combustion in internal combustion engine

Yuqiang Li,Shoulong Lin,Long Huang,Jiangwei Liu

DOI: https://doi.org/10.1016/j.energy.2023.129683

IF: 9

2024-01-01

Energy

Abstract:Acetone-butanol-ethanol (ABE), serving as the intermediate product in the biobutanol production process, has garnered significant attention as a promising alternative fuel, thanks to its ability to avoid the costs and energy consumption associated with biobutanol purification, as well as its potential to improve thermal efficiency and reduce pollutant emissions of internal combustion engine. However, to date, there has been limited in-depth research into the chemical reaction mechanism for the combustion of gasoline-ABE blends and its application in engine simulations. In this study, a skeletal chemical reaction mechanism of gasoline-ABE blends was constructed, which consists of 87 components and 387 reactions, using a manifold trajectory-based dimension reduction algorithm developed by our research group. The findings illustrate that the skeletal mechanism can accurately predict ignition delay, laminar flame speed, and premixed flame species profiles for each component within gasoline-ABE blends, including isooctane, n-heptane, toluene, acetone, butanol, and ethanol. The skeletal mechanism was subsequently coupled with a CFD model to further validate its efficacy in engine combustion simulation. The results indicate that the combustion characteristics of gasoline-ABE blends in the engine can be reliably reproduced. After conducting a comprehensive simulation analysis, it is revealed that gasoline blended with 30 vol% ABE361(A:B:E = 3:6:1) exhibits a shorter initial combustion duration, an extended main combustion duration, reduced CO emissions, but also increased NOx emissions.

energy & fuels,thermodynamics
Skeletal Kinetic Modeling for the Combustion of Endothermic Hydrocarbon Fuel in Hypersonic Vehicle

Peng Hui-Sheng,Zhong Bei-Jing

DOI: https://doi.org/10.1115/1.4053068

2021-01-01

Journal of Energy Resources Technology

Abstract:Chemical kinetic mechanism plays a vital role in the deep learning of reacting flow in practical combustors, which can help obtain many details of the combustion process. In this paper, a surrogate model and a skeletal mechanism for an endothermic hydrocarbon fuel were developed for further investigations of the combustion performance in hypersonic vehicles: (1) The surrogate model consists of 81.3 mol% decalin and 18.7 mol% n-dodecane, which were determined by both the composition distributions and key properties of the target endothermic hydrocarbon fuel. (2) A skeletal kinetic mechanism only containing 56 species and 283 reactions was developed by the method of "core mechanism + sub mechanism". This mechanism can be conveniently applied to the simulation of practical combustors for its affordable scale. (3) Accuracies of the surrogate model and the mechanism were systematically validated by the various properties of the target fuel under pressures of 1-20atm, temperatures of 400-1250 K, and equivalence ratios of 0.5-1.5. The overall errors for the ignition and combustion properties are no more than 0.4 and 0.1, respectively. (4) Laminar flame speeds of the target fuel and the surrogate model fuel were also measured for the validations. Results show that both the surrogate model and the mechanism can well predict the properties of the target fuel. The mechanism developed in this work is valuable to the further design and optimization of the propulsion systems.
Skeletal Mechanism Construction for Heavy Saturated Methyl Esters in Real Biodiesel Fuels

Han Li,Wenming Yang,Dezhi Zhou,Wenbin Yu

DOI: https://doi.org/10.1016/j.fuel.2018.11.020

IF: 7.4

2018-01-01

Fuel

Abstract:Methyl decanoate, methyl-5-decenoate and methyl-9-decenoate have been widely adopted as biodiesel surrogates for engine simulation. However, these surrogates have relatively short chain length and very different physical properties compared with biodiesel molecules. Additionally, it is difficult to distinguish the unsaturafion degree of different biodiesel fuels by using these surrogates. The direct use of the heavy methyl esters in real biodiesel fuels as surrogates is essential to accurately simulate biodiesel fuels. In this work, a four-part scheme to formulate skeletal mechanism for heavy saturated methyl esters has been proposed. Within the scheme, the oxidation mechanism is divided into four parts: low temperature oxidation, high temperature decomposition, ester group reactions and detailed C4-C0 chemistry. A skeletal mechanism for two of the five main methyl esters in real biodiesel fuels, i.e. saturated methyl palmitate and methyl stearate, has been constructed. The obtained skeletal mechanism contains only 6 fuel-dependent species and 13 fuel-dependent reactions for each heavy saturated methyl ester. Extensive validations were performed against shock tube experimental data for ignition delay timing under different initial pressure, temperature and equivalence ratio. The ignition delay behavior at high temperature has been well captured by the developed skeletal mechanism. As for ignition at low to medium temperature (from 650 K to 900 K), there is no experimental data due to the low vapor pressure and high melting point of heavy methyl esters. The comparison of ignition behavior at low temperature has been made between several models. Furthermore, the oxidation of n-decane/methyl palmitate and benzene/methyl stearate in a jet-stirred reactor has been utilized to validate the important species concentration. Good agreements have been observed through the validations. The results indicate that the developed skeletal mechanism is capable of predicting the combustion characteristics of methyl palmitate and methyl stearate.
Construction of a compact skeletal mechanism for acetone–n–butanol–ethanol (ABE)/diesel blends combustion in engines using a decoupling methodology

Yuqiang Li,Wei Tang,Shitu Abubakar,Gang Wu

DOI: https://doi.org/10.1016/j.fuproc.2020.106526

IF: 8.129

2020-12-01

Fuel Processing Technology

Abstract:Acetone-n–butanol-ethanol (ABE) has proven to be a promising biofuel rather than n–butanol. Although the detailed and semi-detailed oxidation mechanisms of ABE were proposed, they were not suitable in combustion model with an acceptable timescale. Therefore, a skeletal mechanism for ABE/diesel blends combustion was developed hierarchically with the special emphasis on engine-relevant operating conditions using a decoupling methodology. It composes of 82 species and 247 reactions conformed to the combustion characteristics of nine components which are acetone, n–butanol, ethanol, ABE, diesel and four diesel surrogates including methylcyclohexane, iso–octane, toluene and n–decane. The compact-sized mechanism was benefited from acetone, n-butanol, ethanol and diesel surrogates sharing the same detailed core sub-mechanism, and their extremely simplified fuel-related sub-mechanisms. The mechanism was then fully validated against ignition delay, laminar flame speed, premixed flame species profile, and direct injection compression ignition engine combustion. The results show that the measured combustion behavior in experiments are well reproduced, indicating the current mechanism can be reliably applied to predict the ABE/diesel blends combustion in practical engines.

energy & fuels,engineering, chemical,chemistry, applied
Reduced Kinetic Mechanism for Modeling High-Temperature Ignition and Flames for n-Pentanol

Jaime Tiburcio-Cortés,Juan C Prince,César Treviño

DOI: https://doi.org/10.1021/acsomega.4c05180

IF: 4.1

2024-09-04

ACS Omega

Abstract:n-Pentanol has emerged as a promising substitute for fossil fuels due to its potential in reducing greenhouse gas emissions. This work presents a reduced combustion mechanism for modeling high-temperature ignition (T > 1000 K) and flames for n-pentanol/air mixtures. The model comprises only 64 species and 282 chemical reactions. As we know, this is the first comprehensive study to include all available experimental data for these phenomena and this specific fuel/oxidizer mixture, reported in the literature. Our approach involves coupling a detailed submechanism for n-pentanol to the San Diego mechanism, a reduced scheme for C1-C4 hydrocarbons, followed by a systematic reduction process, mainly using sensitivity analysis and steady-state approximation. We quantitatively assessed the agreement between experimental data and simulation results using deviation or error indicators along with graphical comparisons. Remarkably, the ignition delay times and flame speeds calculated using the reduced kinetic model exhibit a high agreement with the experimental data reported in the literature.
Hierarchical and Comparative Kinetic Modeling of Laminar Flame Speeds of Hydrocarbon and Oxygenated Fuels

E. Ranzi,A. Frassoldati,R. Grana,A. Cuoci,T. Faravelli,A. P. Kelley,C. K. Law

DOI: https://doi.org/10.1016/j.pecs.2012.03.004

IF: 29.5

2012-01-01

Progress in Energy and Combustion Science

Abstract:The primary objective of the present endeavor is to collect, consolidate, and review the vast amount of experimental data on the laminar flame speeds of hydrocarbon and oxygenated fuels that have been reported in recent years, analyze them by using a detailed kinetic mechanism for the pyrolysis and combustion of a large variety of fuels at high temperature conditions, and thereby identify aspects of the mechanism that require further revision. The review and assessment was hierarchically conducted, in the sequence of the foundational C0–C4 species; the reference fuels of alkanes (n-heptane, iso-octane, n-decane, n-dodecane), cyclo-alkanes (cyclohexane and methyl-cyclo-hexane) and the aromatics (benzene, toluene, xylene and ethylbenzene); and the oxygenated fuels of alcohols, C3H6O isomers, ethers (dimethyl ether and ethyl tertiary butyl ether), and methyl esters up to methyl decanoate. Mixtures of some of these fuels, including those with hydrogen, were also considered. The comprehensive nature of the present mechanism and effort is emphasized.
Chemical Kinetic Model for Ignition of Three-Component Fuel Comprising Iso-Octane/N-Heptane/Ethanol

Zheng Dong,Zhong Bei-Jing

DOI: https://doi.org/10.3866/pku.whxb201207042

2012-01-01

Acta Physico-Chimica Sinica

Abstract:A reduced chemical kinetic mechanism for the oxidation of three-component fuel comprising iso-octane/n-heptane/ethanol has been developed. The mechanism consists of 50 species and 193 elementary reactions and emphasizes the ignition process. Using path and sensitivity analyses, the path of primary reference fuel (PRF) oxidation and major elementary reactions at high and low temperatures are given. The validated results show that the present mechanism gives good agreement with experimental data for ignition delay time predictions. Because of the few species and reactions presenting in the chemical kinetic model, the mechanism is applicable to multidimensional computational fluid dynamic (CFD) simulation of the co-combustion of gasoline with ethanol.
Skeletal Reduction of Combustion Mechanism of Kerosene Surrogate Fuels

姚通,文斐,钟北京

2013-01-01

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics

Abstract:Based on the characteristic value analysis simplified method, detailed oxidation reaction mechanism of kerosene surrogate fuels n-decane (118 species and 527 reactions) and n-propylcyclohexane (106 species and 382 reactions) were simplified and skeletal mechanism was respectively obtained which contains 68 species 302 reactions and 67 species 250 reactions. The ignition delay times and laminar flame speeds were simulated using the skeletal and detailed mechanisms and their simulation results were compared, the results shown that the skeletal mechanisms had high calculation precision, the method for simplification of high hydrocarbon fuels detailed mechanism was effective.
Cross-effect considered skeletal chemical mechanism construction for primary reference fuel/oxymethylene ethers blends using radical trace and sensitivity analysis

Shuai Huang,Yachao Chang,Ming Jia,Xu Han,Hu Wang

DOI: https://doi.org/10.1016/j.combustflame.2024.113359

IF: 4.4

2024-04-01

Combustion and Flame

Abstract:Oxymethylene ethers (OME n, n = 1–6) are a class of synthetic liquid fuels that carry a great potential to reduce carbon dioxides (CO2) and particle matter emissions. However, the lower heating value of all OME n is inferior to conventional diesel fuel, hindering their applications in compression-ignition engines. Instead, their utilizations as diesel additives have attracted considerable attention. Unfortunately, the blending chemistry of OME n and alkanes has not been investigated thoroughly. This study proposes a practical skeletal oxidation mechanism for primary reference fuel (PRF)/OME1–6. First, the skeletal chemical mechanisms for OME3, iso-octane, and n-heptane are constructed utilizing reaction class-based global sensitivity analysis. Then, the interactions among the three fuels are identified through sensitivity analysis and OH radical trace. It is found that the cross effects of the three fuels mainly occur in low-temperature regimes, and H-atom abstraction reactions have a significant influence on the co-oxidation of blended fuels. Additionally, blending OME3 with n-heptane impedes the consumption of OME3 from undergoing certain pathways, including the formation of cyclic ether from QOOH and the second time oxygen addition. The reactivity of iso-octane/OME3 blends at low temperatures is majorly driven by OME3 because of the low reactivity of iso-octane. Based on reaction rate rules, the skeletal mechanisms for OME1–6 are derived on the basis of the OME3 mechanism constructed above. The experiments in jet-stirred reactors fueled with OME3/iso-octane and OME3/n-heptane respectively with various blending ratios are conducted to evaluate the performance of the present skeletal mechanism. In addition, the mechanism is comprehensively validated against the experimental data regarding neat fuels and their mixtures for PRF/OME1–6, including species concentrations in jet-stirred reactors and premixed flames, auto-ignitions in shock tubes and rapid compression machines, and laminar flame speeds under a wide range of operating conditions (p = 0.04–58 atm, φ=0.25–4.0, and T = 500–1800 K). Good consistencies between simulations and laboratory observations are achieved.

energy & fuels,engineering, chemical, mechanical,thermodynamics, multidisciplinary

A skeletal mechanism for premixed flames of isooctane/2-methylfuran blends

Direct numerical simulations of rich premixed turbulent n-dodecane/air flames at diesel engine conditions

Chemical Kinetic Mechanism of A Three-Component Fuel Composed of Iso-Octane/N-Heptane/Ethanol

A compact skeletal mechanism for n-dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations

A skeletal mechanism for gasoline surrogates: Development, validation, and CFD application

An Experimental and Kinetic Modeling Study of Premixed Laminar Flames of Methyl Pentanoate and Methyl Hexanoate

SKELETAL MECHANISM CONSTRUCTION FOR METHYL OLEATE IN REAL BIODIESEL FUELS

Developing a New Skeletal Mechanism for Propane, Butane, and LPG Fuels

A Detailed Kinetic Mechanism of Multistage Oxidation and Combustion of Octanes

Optimized Skeletal Models of Butane Combustion

Development of a Skeletal Mechanism for Aviation Kerosene Surrogate Fuel

A new skeletal kinetic model for methanol/ n-heptane dual fuels under engine-like conditions

A skeletal chemical reaction mechanism for gasoline-ABE blends combustion in internal combustion engine

Skeletal Kinetic Modeling for the Combustion of Endothermic Hydrocarbon Fuel in Hypersonic Vehicle

Skeletal Mechanism Construction for Heavy Saturated Methyl Esters in Real Biodiesel Fuels

Construction of a compact skeletal mechanism for acetone–n–butanol–ethanol (ABE)/diesel blends combustion in engines using a decoupling methodology

Reduced Kinetic Mechanism for Modeling High-Temperature Ignition and Flames for n-Pentanol

Hierarchical and Comparative Kinetic Modeling of Laminar Flame Speeds of Hydrocarbon and Oxygenated Fuels

Chemical Kinetic Model for Ignition of Three-Component Fuel Comprising Iso-Octane/N-Heptane/Ethanol

Skeletal Reduction of Combustion Mechanism of Kerosene Surrogate Fuels

Cross-effect considered skeletal chemical mechanism construction for primary reference fuel/oxymethylene ethers blends using radical trace and sensitivity analysis