Abstract:In this paper, the methodology of the directed relation graph with error propagation and sensitivity analysis (DRGEPSA), proposed by Niemeyer et al. (Combust Flame 157:1760–1770, 2010), and its differences to the original directed relation graph method are described. Using DRGEPSA, the detailed mechanism of ethylene containing 71 species and 395 reaction steps is reduced to several skeletal mechanisms with different error thresholds. The 25-species and 131-step mechanism and the 24-species and 115-step mechanism are found to be accurate for the predictions of ignition delay time and laminar flame speed. Although further reduction leads to a smaller skeletal mechanism with 19 species and 68 steps, it is no longer able to represent the correct reaction processes. With the DRGEPSA method, a detailed mechanism for n-dodecane considering low-temperature chemistry and containing 2115 species and 8157 steps is reduced to a much smaller mechanism with 249 species and 910 steps while retaining good accuracy. If considering only high-temperature (higher than 1000 K) applications, the detailed mechanism can be simplified to even smaller mechanisms with 65 species and 340 steps or 48 species and 220 steps. Furthermore, a detailed mechanism for a kerosene surrogate having 207 species and 1592 steps is reduced with various error thresholds and the results show that the 72-species and 429-step mechanism and the 66-species and 392-step mechanism are capable of predicting correct combustion properties compared to those of the detailed mechanism. It is well recognized that kinetic mechanisms can be effectively used in computations only after they are reduced to an acceptable size level for computation capacity and at the same time retaining accuracy. Thus, the skeletal mechanisms generated from the present work are expected to be useful for the application of kinetic mechanisms of hydrocarbons to numerical simulations of turbulent or supersonic combustion.

Optimized Skeletal Models of Butane Combustion

Skeletal Reaction Models for Methane Combustion

Combustion Kinetic Model Optimization Using the Derived Targets from MBMS Experiments

Optimization of Combustion Kinetic Models on a Feasible Set

Non-premixed Ignition, Laminar Flame Propagation, and Mechanism Reduction of N-Butanol, Iso-Butanol, and Methyl Butanoate

Laminar Flame Speeds, Counterflow Ignition, and Kinetic Modeling of the Butene Isomers

Pressure-dependent Kinetics on the C4H7 Potential Energy Surface and Its Effect on Combustion Model Predictions

Skeletal Reduction of Combustion Mechanism of Kerosene Surrogate Fuels

Compact Combustion Mechanisms of Typical n-Alkanes Developed by the Minimized Reaction Network Method

Reduced chemistry for butanol isomers at engine-relevant conditions

Development of efficient and accurate skeletal mechanisms for hydrocarbon fuels and kerosene surrogate

Spectral uncertainty quantification, propagation and optimization of a detailed kinetic model for ethylene combustion

Skeletal and Reduced Kinetic Models for Methane Oxidation under Engine-Relevant Conditions

A wall heat transfer model and a skeletal reaction mechanism of iso-octane for CFD simulatiaon of gasoline engines

Toward Machine Learned Highly Reduce Kinetic Models For Methane/Air Combustion

Modeling Ignition of a Heptane Isomer: Improved Thermodynamics, Reaction Pathways, Kinetics, and Rate Rule Optimizations for 2-Methylhexane

Developing a New Skeletal Mechanism for Propane, Butane, and LPG Fuels

Skeletal Kinetic Modeling for the Combustion of Endothermic Hydrocarbon Fuel in Hypersonic Vehicle

Optimization of simplified combustion mechanism of n-butanol based on Shuffled Frog Leaping Algorithm

Understanding the Reaction Pathways in Premixed Flames Fueled by Blends of 1,3-Butadiene and N-Butanol

An Optimized Methane Reaction Model for Oxyfuel Combustion