Abstract:Mechanically flexible vertical-channel-structured thin-film transistors (VTFTs) with a channel length of 200 nm were fabricated on 1.2 μm thick colorless polyimide (CPI) substrates. All layers composing the gate stacks were prepared by atomic-layer deposition (ALD) with a good step coverage, and the process thermal budget was designed below 180 °C. Zeocoat was introduced as a spacer material to improve the device characteristics by properly determining the process conditions for clearly forming the vertical sidewalls. The transfer characteristics of the fabricated flexible ZnO and IGZO VTFTs showed the field-effect mobility of 3.31 and 6.57 cm2 V–1 s–1, the threshold voltages of 2.34 and 1.52 V, the subthreshold swings of 1.42 and 0.34 V/dec, and I ON/I OFF of 1.13 × 104 and 5.16 × 105, respectively, after the postannealing at 150 °C. The threshold voltage shifts (ΔV TH) under positive and negative bias stresses (PBS and NBS) were estimated to be +1.0, +1.8 V and −1.8, −3.8 V for 104 s for ZnO and IGZO VTFTs, respectively. The flexible IGZO VTFTs delaminated by means of a laser lift-off process did not show any marked degradation in device characteristics under mechanically strained conditions at various radii of curvature (R c). The ΔV TH values were also estimated to be +1.2 and −2.1 V under PBS and NBS at R c of 1 mm, respectively, demonstrating stable bending reliability. Appropriate choices of spacer materials, optimization of patterning process for spacer patterns, and ALD process of IGZO active channel can be proposed as key process parameters for guaranteeing excellent device performance of the oxide-channel VTFTs in this work.

Flexible Thin-Film Transistors with Vertical In-Ga-Zn-O Channel Using Atomic-Layer Deposition on Poly(Ethylene Naphthalate) Substrate

Flexible vertical-channel thin-film transistors using In-Ga-Zn-O active channel and polyimide spacer on poly(ethylene naphthalate) substrate

Highly Robust Flexible Vertical-Channel Thin-Film Transistors Using Atomic-Layer-Deposited Oxide Channels and Zeocoat Spacers on Ultrathin Polyimide Substrates

Improvement in Device Performance of Vertical Thin-Film Transistors Using Atomic Layer Deposited IGZO Channel and Polyimide Spacer

Flexible Dual-layer Channel Gallium-doped ZnO Thin-film Transistors Fabricated on Plastic Substrates at Room Temperature

Highly Bendable In-Ga-ZnO Thin Film Transistors by Using a Thermally Stable Organic Dielectric Layer

Vertical Channel ZnO Thin-Film Transistors Using an Atomic Layer Deposition Method

Implementation of oxide vertical channel TFTs with sub-150 nm channel length using atomic-layer deposited IGZO active and HfO2 gate insulator

Flexible Transparent Junctionless TFTs with Oxygen-Tuned Indium-Zinc-Oxide Channels

Implementation of In–Ga–Zn–O Thin-Film Transistors with Vertical Channel Structures Designed with Atomic-Layer Deposition and Silicon Spacer Steps

Flexible Low-Voltage IGZO Thin-Film Transistors with Polymer Electret Gate Dielectrics on Paper Substrates

Flexible electric-double-layer thin film transistors based on a vertical InGaZnO 4 channel

36.3: Flexible ZnO Thin‐Film Transistors Fabricated on PEN Substrate by Atomic Layer Deposition at Low Temperature

DC and AC Performance of InGaZnO Thin-Film Transistors on Flexible PEEK Substrate

Flexible IGZO Thin-Film Transistors and Inverter Circuits with Diode-Connected Transistors Fabricated on Transparent Polyimide Substrates

Graphitic Carbon Nitride/Polyvinylpyrrolidone Composite Dielectric for Low-Voltage Flexible InZnO Thin Film Transistor Grown on a Polyethylene Terephthalate Substrate

High-Performance Flexible ZnO Thin-Film Transistors by Atomic Layer Deposition

Highly Flexible Electronics from Scalable Vertical Thin Film Transistors