Abstract:Addressing the escalating threat of environmental pollution and ecological risks resulting from the discharge of organic pollutants into aquatic environments demands immediate and comprehensive solutions. In this context, leveraging agricultural waste to produce activated carbon appears to be an intriguing approach to resolving this pressing environmental problem. This study employed doum fiber ( Chamaerops humilis ) as an alternative precursor for producing low-cost and mesoporous activated carbon (ACDF) with a high surface area (630.92 m 2 /g) through a pyrolysis method involving chemical activation with H 3 PO 4 . The adsorption characteristics of ACDF were investigated for removing phenolic pollutants: Bisphenol A (BPA) and α-Naphthol (ANP). The optimal activation conditions were determined using response surface methodology with full factorial design (RSM-FFD), considering four variable factors: Activation temperature (200–600 °C), Activation time (30–180 min), Concentration of H 3 PO 4 (1–10 mol/L), and Impregnation Ratio (0.5–2 g/mL). The results indicated that the best activation conditions were an activation temperature of 600 °C, an activation time of 43.46 min, an H 3 PO 4 concentration of 8 mol/L, and an impregnation ratio of 0.5. The adsorption equilibrium data from kinetics and isotherm analyses demonstrated that the adsorption of BPA and ANP onto ACDF is appropriately described by the pseudo-second-order and Langmuir models. The maximum adsorption capacity of ACDF was 56.11 mg/g for BPA and 69.97 mg/g for ANP. Thermodynamic parameters indicated that the reactions of both pollutants on the ACDF surface were spontaneous, favorable, and exothermic. Moreover, ACDF displayed a higher affinity and stability over five successive cycles for ANP compared to BPA, owing to its reactivity as confirmed by Density Functional Theory (DFT). The interaction mechanism between the adsorbate and the ACDF surface involved main interactions such as electrostatic interaction, hydrogen bonding, and π-π interactions. The results demonstrate that the optimized ACDF is a cost-effective and readily available option for removing phenolic pollutants from industrial wastewater.

Heat and ZnCl2 chemical carbonization of date stone as an adsorbent: optimization of material fabrication parameters and adsorption studies

Mesoporous Carbon from Optimized Date Stone Hydrochar by Catalytic Hydrothermal Carbonization Using Response Surface Methodology: Application to Dyes Adsorption

A Kinetic and Thermodynamic Study of Cationic Thiazine Dye Removal From Aqueous Solution by Date Stones Variety Ghars

Porous ZnCl2-Activated Carbon from Shaddock Peel: Methylene Blue Adsorption Behavior

Synthesis and characterization of nano zinc oxide/zinc chloride–activated carbon composite based on date palm fronds: adsorption of methylene blue

Synthesis and characterization of activated carbon from biomass date seeds for carbon dioxide adsorption

High adsorption capacity of phenol and methylene blue using activated carbon derived from lignocellulosic agriculture wastes

Characterization of activated carbons prepared from sugarcane bagasse by ZnCl2 activation

Exploring the structural characteristics and adsorption capabilities of cost-effective N- doped activated carbon derived from waste biomass for CO2 adsorption

Blended Nephelium lappaceum and Durio zibethinus wastes for activated carbon production via microwave-ZnCl2 activation: optimization for methylene blue dye removal

ZnCl<sub>2</sub>-activated carbon from soybean dregs as a high efficiency adsorbent for cationic dye removal: isotherm, kinetic, and thermodynamic studies

ZnCl2 activated mesoporous carbon from rice straw: optimization of synthetic process and its application as highly efficient adsorbent for amoxicillin.

Activated carbon derived from sugarcane and modified with natural zeolite for efficient adsorption of methylene blue dye: experimentally and theoretically approaches

Chemical activation and magnetization of carbonaceous materials fabricated from waste plastics and their evaluation for methylene blue adsorption

Desirability function and Box-Behnken design optimization for crystal violet dye adsorption by palm date stone activated carbon

Synthesis and optimization of activated carbon from Doum ( Chamaerops humilis ) fiber via pyrolysis-assisted H 3 PO 4 activation for removal of bisphenol A and α-Naphthol

Efficient Adsorption of Methyl Orange on Nanoporous Carbon from Agricultural Wastes: Characterization, Kinetics, Thermodynamics, Regeneration and Adsorption Mechanism

Optimization of Activated Carbon Fiber Preparation from Hemp Fiber through Dipotassium Hydrogen Phosphate for Application of Thermal Storage System

In-situ synthesis of efficient ZnCl2 doped pyrolyzed biochar for adsorptive remediation of organic dyes: Performance evaluation, mass transfer and mechanism

Synthesis of hydrochar from date palm seeds using microwave-enhanced hydrothermal carbonization and its application in dyes removal

Control of pore structure and surface chemistry of activated carbon derived from waste Zanthoxylum bungeanum branches for toluene removal in air