Abstract:Abstract Sulfadiazine (SDZ) is a commonly used antibiotic in medicine, aquaculture, and animal husbandry. However, its misuse has resulted in its release into soil and water environments, posing a gradual threat to the environment and human health. In this study, cotton pulp, poplar sawdust, and corn stover were chosen as raw materials. Zinc chloride (ZnCl 2) was used as a modifier to prepare modified porous carbon through pyrolysis at different carbonization temperatures (400 and 800°C). The objective was to investigate the adsorption effect and mechanism of modified porous carbon on SDZ in aqueous environments, as well as the effect of different biomass fractions of the carbon source on the adsorption effect. The physical and chemical properties of the modified porous carbon were characterized by various means of characterization, and the results showed that the high temperature and modification effects made the adsorbent material possess a larger specific surface area and richer pore structure, higher aromaticity, higher degree of graphitization, etc., which would be beneficial for the adsorption of SDZ. Among them, CCPZ800 showed the highest saturation adsorption of SDZ, Q max = 425.45 mg/g. The adsorption experiments were carried out by changing the initial conditions and fitted with kinetic and isothermal adsorption to further explain the adsorption mechanism of modified porous carbon on SDZ in conjunction with the adsorption of SDZ by hydrothermal carbon materials. The results showed that the adsorption of modified porous carbon on SDZ conformed to the quasi-secondary kinetic and Freundlich isothermal adsorption models. Adsorption mechanism of SDZ on modified porous carbon followed a multimolecular layer adsorption, with chemical adsorption being the dominant process. Both physical adsorption and chemical adsorption occurred simultaneously, with the main adsorption mechanism being π–π conjugation. In addition, compositional distribution of biomass from different carbon sources results in variations in pyrolysis mode and pyrolysis products, which in turn affect adsorption. By analyzing the effect of variability in the composition of biomass on the adsorption effect of SDZ, it can be concluded that higher cellulose content in the carbon source leads to a better adsorption effect of SDZ. The study showcases the effectiveness of ZnCl 2 -modified porous carbon in removing SDZ from water, offering insights into the selection of raw materials for this adsorbent preparation.

ZnCl2 activated mesoporous carbon from rice straw: optimization of synthetic process and its application as highly efficient adsorbent for amoxicillin.

Removal of amoxicillin from aqueous solution using sludge-based activated carbon modified by walnut shell and nano-titanium dioxide

Acid‐Activated Biochar for Efficient Elimination of Amoxicillin From Wastewater

Diclofenac sodium and paracetamol removal with ZnCl2 activated carbon produced from rice straw

Co-carbonization of Biomass and Oily Sludge to Prepare Sulfamethoxazole Super-Adsorbent Materials.

Activated carbon from agricultural industry waste for use as an adsorbent of sulfamethazine: Fascinating and environmentally friendly process

Removal of amoxicillin in aqueous solutions by a chemical activated carbons derived from Jujube nuts: adsorption behaviors, kinetic and thermodynamic studies

From Lignin to Three-Dimensional Interconnected Hierarchically Porous Carbon with High Surface Area for Fast and Superhigh-Efficiency Adsorption of Sulfamethazine

Investigating the adsorption mechanism of zinc chloride-modified porous carbon for sulfadiazine removal from water

Microbially-mediated synthesis of activated carbon derived from cottonseed husks for enhanced sulfanilamide removal

Nitrogen-doped mesoporous activated carbon from Lentinus edodes residue: an optimized adsorbent for pharmaceuticals in aqueous solutions

High performance removal of sulfamethoxazole using large specific area of biochar derived from corncob xylose residue

Preparation of porous carbon from hydrothermal treatment products of modified antibiotic mycelial residues and its use in CO 2 capture

Mesoporous and adsorption behavior of algal biochar prepared via sequential hydrothermal carbonization and ZnCl2 activation

Cellulase modified waste biomass to remove sulfamethazine from aqueous solutions

Study on the Adsorption Performance of Amoxicillin by Hydrothermally Modified Coconut Shell Activated Carbon

Studies on Removal of NH4+-N from Aqueous Solution by Using the Activated Carbons Derived from Rice Husk

Fabricating modified carbon sesame straw for adsorption of acetaminophen and ibuprofen from aqueous media: isotherm and kinetic models

Research on efficient removal of ciprofloxacin through sequential rice straw biochar modification via alkali activation and manganese oxides

Preparation of low-cost sludge-based highly porous biochar for efficient removal of refractory pollutants from agrochemical and pharmaceutical wastewater

Microporous melamine-formaldehyde networks loaded on rice husks for dynamic removal of organic micropollutants