Abstract:The methodology of coating electrocatalysts on semiconductor substrates is critical for the catalytic performance of photoelectrochemical electrodes. A weakly bound coating leads to orders of magnitude lower efficiency and reliability compared to those required to meet the commercial demand. Herein, a facile strategy based on the hydrolysis of TiCl4 is developed to solve the coating issue. Mesoporous tungsten phosphide (WP) particles were spin-coated and affixed onto TiO2-protected planar p-Si by the formation of a TiO2 necking layer between the catalyst particles and the substrates. Under 1 sun illumination, the as-prepared WP/TiO2/Si photocathode yields a saturated current density of −35 mA cm–2 and a durability of over 110 h with a current density over −15 mA cm–2 at 0 V versus a reversible hydrogen electrode in a 1.0 M KOH solution, which is among the state-of-the-art performances of commercial planar Si-based photocathodes. The Kelvin probe force microscopy results suggest the successive transfer of photoelectrons from Si to TiO2 and WP. The as-formed TiO2 necking layer plays the key role in ensuring the surface catalytic activity and durability. This necking strategy is also applicable for coating other transition-metal phosphides, for example, MoP and FeP, thus offering a practical approach to meet the commercial requirement of low-cost, highly efficient, and durable photoelectrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03620?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03620</a>.TEM images, XRD patterns, and N2 adsorption–desorption isotherms of pre-synthesized WP, MoP, and FeP; structural optimization results of the WP/TiO2/Si photocathode; additional characterization results for the WP/TiO2/Si photocathode including the Faradaic efficiency, XPS profiles, and SEM and AFM images; SEM images of MoP/TiO2/Si and FeP/TiO2/Si photocathodes; and a survey on the PEC performance based on Si from recent literature reports (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03620/suppl_file/am1c03620_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Crystalline TiO2 protective layer with graded oxygen defects for efficient and stable silicon-based photocathode

A high-performance TiO2 protective layer derived from non-high vacuum technology for a Si-based photocathode to enhance photoelectrochemical water splitting

A Thin-Film Silicon Based Photocathode With A Hydrogen Doped Tio2 Protection Layer For Solar Hydrogen Evolution

Oxidatively stable nanoporous silicon photocathodes with enhanced onset voltage for photoelectrochemical proton reduction

Emerging metal oxide/nitride protection layers for enhanced stability of silicon photoelectrodes in photoelectrochemical catalysis: Recent advancements and challenges

Titanium oxide crystallization and interface defect passivation for high performance insulator-protected Schottky junction MIS photoanodes.

A Silicon-Based Photocathode for Water Reduction with an Epitaxial SrTiO 3 Protection Layer and a Nanostructured Catalyst

Substantial lifetime enhancement for Si-based photoanodes enabled by amorphous TiO 2 coating with improved stoichiometry

Black Silicon with Controllable Macropore Array for Enhanced Photoelectrochemical Performance

Conductive layer protected and oxide catalyst-coated thin-film silicon solar cell as an efficient photoanode

Enhanced photo-carrier transportation at semiconductor/electrolyte interface of TiO2 photoanode by oxygen vacancy engineering

Efficient photoelectrochemical water oxidation enabled by an amorphous metal oxide-catalyzed graphene/silicon heterojunction photoanode

Enhanced photoelectrocatalysis in porous single crystalline rutile titanium dioxide electrodes

A thin-film silicon based photocathode with a hydrogen doped TiO<sub>2</sub> protection layer for solar hydrogen evolution

Al-ZnO/CdS Photoanode Modified with a Triple Functions Conformal TiO2 Film for Enhanced Photoelectrochemical Efficiency and Stability

Defect-Tolerant TiO 2 -Coated and Discretized Photoanodes for >600 h of Stable Photoelectrochemical Water Oxidation

Stabilization of Silicon Photoanode By Hafnium Zirconium Oxide Interlayer for Efficient Solar Water Oxidation

Gradient‐Structuring Manipulation in Ni 3 S 2 Layer Boosts Solar Hydrogen Production of Si Photocathode in Alkaline Media

Coating of Phosphide Catalysts on p-Silicon by a Necking Strategy for Improved Photoelectrochemical Characteristics in Alkaline Media

Pore walls as high-way for efficient bulk charge transfer in porous SrTiO3 single crystals boosting photocatalytic overall water splitting

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production