Abstract:These complexes provided stress relief and bridging effects during deformation, thereby increasing ductability without affecting modulus and strength. The presence of core‐shell nanoparticles and long‐chain branching, and the subsequent formation of a network structure, will impede the movement of small gas molecules, improving gas barrier properties. Incorporating inorganic particles is a common approach to preparing polymeric materials with desirable physical properties and processability. However, this often results in increased brittleness, necessitating methods to improve melt strength and toughness. In this study, in situ polymerization was employed to functionalize silica nanoparticles with the silane coupling agent (3‐aminopropyl) triethoxysilane (APTES) as a core. A flexible chain segment, poly(butylene itaconate) (PBI), was then introduced as a "rubbery" intermediate layer, resulting in a core‐shell structure of poly(L‐lactic‐co‐butanediol itaconate) nano‐silica copolymer films (PLBISiO2) with both branched and "rubbery" structures. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) confirmed the formation of macromolecular chains, with the molecular weight (Mn) of PLBI increasing from 59,638 to 74,306 g/mol. This significant increase supports the "rubbery" core‐shell structure. When 0.5% SiO2 was added, the T5% of the film increased by 40°C, significantly improving thermal stability. Additionally, the elongation at break increased to 265.7%, while retaining the original tensile strength. Dynamic rheology experiments further confirmed the generation of branched or "rubbery" core‐shell structures, and a doubling of gas barrier properties was observed with increased silica nanoparticles, suggesting potential applications in food packaging or biopharmaceuticals. Highlights Nanocomposites with core‐shell structure and improved mechanical properties. Dynamic rheology experiments confirmed the formation of the core‐shell structure. Significantly improved gas barrier properties due to core‐shell structure.

High Pressure Treatment for Improving Water Vapour Barrier Properties of Poly(lactic acid)/Ag Nanocomposite Films

Effect of Low‐concentration Alkali Solution Pretreatment on the Properties of Bamboo Particles Reinforced Poly(lactic Acid) Composites

Effect of High Pressure Processing on Moisture Sorption Properties of Brown Rice

Enhancement of Functional Properties of Rice Bran Proteins by High Pressure Treatment and Their Correlation with Surface Hydrophobicity

High-pressure treatment of water-filled co-extruded polylactide films: Effect on microstructure, barrier, thermal, and rheological properties

Comparative Study on Water Vapour Resistance of Poly(lactic acid) Films Prepared by Blending, Filling and Surface Deposit

Effect of nanocrystalline cellulose on mechanical, thermal, and barrier properties of polylactic acid blown composite film

Optimizing interfacial adhesion in PBAT/PLA nanocomposite for biodegradable packaging films

Improvement of PLA-PVA/chitosan nanocomposite laminate film for packaging via crosslinking with electron beam irradiation: Mechanical, thermal and antimicrobial analysis

New poly(lactic acid)-based nanocomposite films for food packaging applications

Effect of Type of Plasticizers on Mechanical and Water Barrier Properties of Transglutaminase Cross-Linked Zein–Oleic Acid Composite Films

Tuning wettability and mechanical property of polylactide composite films with in-situ nanofibrils of poly(butylene adipate-co-terephthalate)

Enhancing the mechanical properties of polylactic acid (PLA) composite films using Pueraria lobata root microcrystalline cellulose

Preparation and characterization of crystalline poly(L‐lactic acid)/silica nanocomposite films with high ductility and gas barrier properties

Enhancing gas barrier performance of polylactic acid/lignin composite films through cooperative effect of compatibilization and nucleation

Effect of remote Plasma assisted WPU/CNF multilayer coating assembly on PLA film properties

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Effect of sodium alginate on properties of wheat straw/polylactic acid composites

Production and Characterization of Eco-composite Polylactic Acid Films Doped with Carob Pod Powder/Silver Nanoparticles and Their Potential Utilization in Packaging Applications

The Effects of Nanoclay on the Mechanical Properties, Carvacrol Release and Degradation of a PLA/PBAT Blend

Enhancement of Gas Barrier Properties of Graphene Oxide/Poly (Lactic Acid) Films Using a Solvent-free Method