Abstract:The strategies that have been developed to improve the utility of poly(lactic acid) (PLA) in packaging materials were examined. This study has focused on two potential solutions: the addition of a plasticizer and the use of nanoclays under optimal conditions. Triacetin (TA) as a plasticizer (10 and 20% by wt) and modified nanoclays (C30B and C20A) as reinforcing agents (1 and 3% by wt) were incorporated into the PLA matrix. The PLA-based films were prepared through solvent-casting method. The nanocomposite films] characteristics including tensile properties, moisture content (MC), water vapor permeability (WVP), swelling, stability, FTIR spectra, optical properties, thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were investigated. The results demonstrated that both TA and nanoclays led to an increase in the elongation-at-break ( E ab ) and tensile strength (TS) of PLA films. In addition, the films with TA of 20% (by wt) showed the highest E ab (78.5%). By adding nanoclays, a decrease in WVP, stability, and light transmission, and an increase in MC, swelling, and opacity of the PLA-based films were observed. PLA films with 3% (by wt) of C20A and 10% (by wt) of TA contents showed the lowest WVP (1.06 × 10 –10 g/m.s Pa). Furthermore, the film containing 3% (by wt) of C30B and 20% (by wt) of TA displayed the highest MC (19.4%). XRD analysis approved that an intercalated conformation was created in the nanocomposites during the incorporation process. The TGA showed a slight improvement in thermal stability of the nanocomposite films compared to a neat PLA film. This study confirmed that the PLA-based films prepared by incorporating an optimal amount of TA and the nanoclays (C20A and C30B) into the PLA matrix are promising materials for food packaging applications.

Improvement of PLA-PVA/chitosan nanocomposite laminate film for packaging via crosslinking with electron beam irradiation: Mechanical, thermal and antimicrobial analysis

In Situ Self-Assembly Chitosan/ε-Polylysine Bionanocomposite Film with Enhanced Antimicrobial Properties for Food Packaging.

Highly transparent PVA/nanolignin composite films with excellent UV shielding, antibacterial and antioxidant performance

High-Performance Biocomposite Polyvinyl Alcohol (PVA) Films Modified with Cellulose Nanocrystals (CNCs), Tannic Acid (TA), and Chitosan (CS) for Food Packaging

Preparation and characterization of N-isopropyl acrylamide grafted polyvinyl alcohol and chitosan blend films with hydrophobic and antibacterial properties

Effect of Gamma Irradiation on the PLA-Based Blends and Biocomposites Containing Rosemary Ethanolic Extract and Chitosan

New poly(lactic acid)-based nanocomposite films for food packaging applications

Improved Hydrophobic, UV Barrier and Antibacterial Properties of Multifunctional PVA Nanocomposite Films Reinforced with Modified Lignin Contained Cellulose Nanofibers

Effects of chitin nano-flake fillers on the mechanical and barrier properties of polylactic acid biocomposite films

Preparing chitosan–polyaniline nanocomposite film and examining its mechanical, electrical, and antimicrobial properties

Development of anti-bacterial adhesion and antibacterial sulfobetaines modified chitosan/polyvinyl alcohol composite films as packaging materials

Development of multilayer films based on PLA/PBAT and sodium alginate for active packaging

Enhancing the mechanical properties of polylactic acid (PLA) composite films using Pueraria lobata root microcrystalline cellulose

Preparation of Chitosan/poly Vinyl Alcohol Films and Their Inhibition of Biofilm Formation Against Pseudomonas Aeruginosa PAO1

Ultraviolet blocking ability, antioxidant and antibacterial properties of newly prepared polyvinyl alcohol-nanocellulose‐silver nanoparticles-ChunJian peel extract composite film

Tuning of the properties of polyvinyl alcohol/ polyacrylamide film by phytic acid and gamma radiation crosslinking for food packaging applications

Multicomponent system for development of antimicrobial PLA-based films with enhanced physical characteristics

Production and Characterization of Eco-composite Polylactic Acid Films Doped with Carob Pod Powder/Silver Nanoparticles and Their Potential Utilization in Packaging Applications

Modified Cellulose Nanocrystals Enhanced the Compatibility Between PLA and PBAT to Prepare a Multifunctional Composite Film

Lignin Nanoparticles for Enhancing Physicochemical and Antimicrobial Properties of Polybutylene Succinate/Thymol Composite Film for Active Packaging

Fabrication of PVA polymer films with improved antibacterial activity by fine-tuning via organic acids for food packaging applications