Abstract:Polylactide (PLA), which features desirable biodegradability and easy melt processability, has been recognized as one of the most promising environment-friendly polymer materials. However, its poor hydrophobicity and toughness limit its application in moisture-proof, barrier, and self-cleaning fields. In this work, we report a facile and efficient method capable of mass fabrication of PLA films with excellent comprehensive properties including superhydrophobicity, good stiffness-toughness balance, and self-cleaning function. Through a casting-thermal stretching process, PLA films with an oriented structure turn from inherently brittle to robust. By employing the breath figure method to assemble a relatively ordered microporous structure and treating the surface with hydrophobic silica nanoparticles, a micro-/nanostructured surface with low surface energy is constructed, which leads to superhydrophobicity. Meanwhile, a highly oriented structure provides excellent mechanical properties with a tensile strength of 92.2 MPa and an elongation at break of 112.3%, even after surface modification. The PLA film exhibits a good self-cleaning property and heat, acid, and water resistance, owing to the high crystallinity and stability of silica particles. This work could provide a facile approach with industrial potential to fabricate PLA materials with special wettability and excellent mechanical properties for self-cleaning and moisture-proof packaging applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c00026?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c00026</a>.DSC curves of PLA and PLA-S films (Figure S1 and Table S1), schematic illustration of the possible reaction between FAS and silica nanoparticles, and FTIR spectra and TGA curve of silica nanoparticles and FAS-modified silica nanoparticles (Figure S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_001.pdf">PDF</a>)Low adhesion of the PLA-S(BF)-12 film to the water droplet (Movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_002.avi">AVI</a>)Sliding angle of the PLA-S(BF)-12 film (Movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_003.avi">AVI</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for KMnO<sub>4</sub> (Movie S3) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_004.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for CNTs (Movie S4) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_005.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for tea (Movie S5) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_006.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for coffee (Movie S6) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_007.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for milk (Movie S7) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_008.mp4">MP4</a>)This article has not yet been cited by other publications.

Comparative Study on Water Vapour Resistance of Poly(lactic acid) Films Prepared by Blending, Filling and Surface Deposit

Effects of Processing Conditions and Plasticizing-Reinforcing Modification on the Crystallization and Physical Properties of PLA Films

Effect of Mixing Poly(lactic Acid) with Glycidyl Methacrylate Grafted Poly(ethylene Octene) on Optical and Mechanical Properties of the Blown Films

Mechanical Characteristics and Barrier Properties of Polylactic Acid Films Prepared by Casting Method

The Influence of Epoxy Functionalized Acrylate Particles on the Properties of Plasticized Pla Blown Films

Polylactide Films with Superhydrophobicity and Superior Mechanical Properties Constructed by Combining Annealing Stretching and Nonsolvent-Induced Phase Separation

Tuning wettability and mechanical property of polylactide composite films with in-situ nanofibrils of poly(butylene adipate-co-terephthalate)

Development of Functionalized Polylactide Thin Films Using Poly(methylhydrogenosiloxane) Sol-Gel Process with Improved Antifouling Properties

Development of Biodegradable Polyamide 4/polyvinyl Alcohol/Poly(lactic Acid) Multilayer Films with Tunable Water Barrier Property and Superior Oxygen Barrier Property

Effect of glycidyl methacrylate-grafted poly(ethylene octene) on the compatibility in PLA/PBAT blends and films

Compatibility Study of Pectin and Polylactic Acid (PLA) Blends Using Molecular Dynamics and Characterization of Thermally Pressed Blend Film

Enhancing the mechanical properties of polylactic acid (PLA) composite films using Pueraria lobata root microcrystalline cellulose

Design of Novel PLA/OMMT Films with Improved Gas Barrier and Mechanical Properties by Intercalating OMMT Interlayer with High Gas Barrier Polymers

Design of novel Polylactide composite films with improved gas barrier and mechanical properties using epoxy chain extender‐grafted organic montmorillonite

Study of Thermal, Mechanical and Barrier Properties of Biodegradable PLA/PBAT Films with Highly Oriented MMT

Physicomechanical properties of biodegradable poly(D,L-lactide) and poly(D,L-lactide-co-glycolide) films in the dry and wet states

Effect of remote Plasma assisted WPU/CNF multilayer coating assembly on PLA film properties

Super-Toughed PLA Blown Film with Enhanced Gas Barrier Property Available for Packaging and Agricultural Applications

Preparation and characterization of poly(vinyl alcohol)/poly(lactic acid) blends containing bio‐based plasticizers

Starch-fiber foaming biodegradable composites with polylactic acid hydrophobic surface

Superhydrophobic, Self-Cleaning, and Robust Properties of Oriented Polylactide Imparted by Surface Structuring