Abstract:Polylactide (PLA), which features desirable biodegradability and easy melt processability, has been recognized as one of the most promising environment-friendly polymer materials. However, its poor hydrophobicity and toughness limit its application in moisture-proof, barrier, and self-cleaning fields. In this work, we report a facile and efficient method capable of mass fabrication of PLA films with excellent comprehensive properties including superhydrophobicity, good stiffness-toughness balance, and self-cleaning function. Through a casting-thermal stretching process, PLA films with an oriented structure turn from inherently brittle to robust. By employing the breath figure method to assemble a relatively ordered microporous structure and treating the surface with hydrophobic silica nanoparticles, a micro-/nanostructured surface with low surface energy is constructed, which leads to superhydrophobicity. Meanwhile, a highly oriented structure provides excellent mechanical properties with a tensile strength of 92.2 MPa and an elongation at break of 112.3%, even after surface modification. The PLA film exhibits a good self-cleaning property and heat, acid, and water resistance, owing to the high crystallinity and stability of silica particles. This work could provide a facile approach with industrial potential to fabricate PLA materials with special wettability and excellent mechanical properties for self-cleaning and moisture-proof packaging applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c00026?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c00026</a>.DSC curves of PLA and PLA-S films (Figure S1 and Table S1), schematic illustration of the possible reaction between FAS and silica nanoparticles, and FTIR spectra and TGA curve of silica nanoparticles and FAS-modified silica nanoparticles (Figure S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_001.pdf">PDF</a>)Low adhesion of the PLA-S(BF)-12 film to the water droplet (Movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_002.avi">AVI</a>)Sliding angle of the PLA-S(BF)-12 film (Movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_003.avi">AVI</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for KMnO<sub>4</sub> (Movie S3) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_004.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for CNTs (Movie S4) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_005.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for tea (Movie S5) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_006.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for coffee (Movie S6) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_007.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for milk (Movie S7) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_008.mp4">MP4</a>)This article has not yet been cited by other publications.

Effectiveness of PECVD deposited nano-silicon oxide protective layer for polylactic acid film: Barrier and surface properties

Eugenol Embedded Zein and Poly(lactic Acid) Film As Active Food Packaging: Formation, Characterization, and Antimicrobial Effects.

Mechanical Characteristics and Barrier Properties of Polylactic Acid Films Prepared by Casting Method

Influence of Gelatin-Based Coatings Crosslinked with Phenolic Acids on PLA Film Barrier Properties

From Cellulose Nanospheres, Nanorods to Nanofibers: Various Aspect Ratio Induced Nucleation/Reinforcing Effects on Polylactic Acid for Robust-Barrier Food Packaging

Plasma Sputtered Tungsten Oxide Thin Film on Poly(lactic acid) for Food Packaging Applications

Comparative Study on Water Vapour Resistance of Poly(lactic acid) Films Prepared by Blending, Filling and Surface Deposit

Preparation of degradable chemically cross-linked polylactic acid films and its application on disposable straws

Superhydrophobic, Self-Cleaning, and Robust Properties of Oriented Polylactide Imparted by Surface Structuring

PREVENTING OF MIGRATION IN FOOD CONTACT POLYVINYL CHLORIDE-BASED STRETCH FILMS WITH POLYLACTIC ACID LAYER

Design of novel Polylactide composite films with improved gas barrier and mechanical properties using epoxy chain extender‐grafted organic montmorillonite

Deposition of Silicon Oxide Coatings by Atmospheric Pressure Plasma Jet for Oxygen Diffusion Barrier Applications

Biodegradable and Gas Barrier Polylactic Acid/Star-Shaped Polycaprolactone Blend Films Functionalized with a Bio-sourced Polyelectrolyte Coating

Effect of remote Plasma assisted WPU/CNF multilayer coating assembly on PLA film properties

Optimizing interfacial adhesion in PBAT/PLA nanocomposite for biodegradable packaging films

Improvement of the Gas Barrier Properties of PLA/OMMT Films by Regulating the Interlayer Spacing of OMMT and the Crystallinity of PLA

Effect of biaxial stretching on the microstructure evolution, optical, mechanical and oxygen barrier properties of biodegradable poly(lactic acid) (PLA)/poly(butylene adipate- co -terephthalate) (PBAT) films

Enhancement of toughness and gas barrier properties of PLA‐based films through bio‐based isosorbide dioctate: Synthesis, characterization, and application

Development of Pomegranate Peel Extract and Nano ZnO Co-Reinforced Polylactic Acid Film for Active Food Packaging

Robust biaxially stretchable polylactic acid films based on the highly oriented chain network and "nano-walls" containing zinc phenylphosphonate and calcium sulfate whisker: Superior mechanical, barrier, and optical properties

Effect of polycarbodiimide, epoxy chain extenders and tannic acid on the hydrolysis and UV resistance of polylactic acid