Abstract:Solar Salt, a molten nitrate salt, plays a crucial role in heat transfer and storage within solar thermal power plants. It helps to mitigate power output fluctuations resulting from changes in sunlight. Additionally, it allows nuclear power plants with thermal energy storage adjusting power output to better meet grid demand, all without altering reactor power. Maintaining the stability of Solar Salt is vital for ensuring the efficiency and cost-effectiveness of these operations. A study was conducted by subjecting fresh Solar Salt to pre-heating at temperatures surpassing the typical operational limits, referred to as the precondition phase, of the Natrium™ Demonstration nuclear plant being built with TerraPower, LLC and GE-Hitachi technology. Subsequently, the focus centered on examining the thermal stability of the preconditioned molten salt under the maximum operating conditions within the ambient atmospheric environment. The preconditioned molten salt, kept at 540 °C for 10 days, consistently exhibited minimal daily mass loss rates at its maximum operating temperatures of 480 and 510 °C, in contrast to the unpreconditioned salt, where initial daily rates were higher and then gradually decreased over time. Furthermore, the molar ratios of nitrite to nitrate ions in the preconditioned salt melts decreased and eventually stabilized at equilibrium states under these maximum operating temperatures. The equilibrium concentrations in the preconditioned melts approached those of the unpreconditioned melts, where nitrite/nitrate ratios increased and eventually stabilized. During the decomposition of both preconditioned and unpreconditioned melts, oxide formation gradually increased but did not reach an equilibrium state. However, the preconditioned melts exhibited lower rate constants at temperatures of 480 °C and 510 °C over time. The onset of melting temperature, initially recorded at 211 °C for the preconditioned 480 and 510 °C melts, gradually increased as the nitrite/nitrate ratios decreased over time, ultimately achieving stability. In contrast, the unpreconditioned 480 and 510 °C melts experienced a gradual decline from 221 °C in their melting points until they reached equilibrium. In , the preliminary treatment of Solar Salt at temperatures exceeding the maximum operation temperatures serves to eliminate impurities and enhance the stability of the molten salt. This preparatory step is essential when using molten nitrate salt as a medium for transferring thermal energy from the sodium cooling loops to the steam generation process in nuclear power plants with thermal energy storage.

Thermal stability of sodium nitrate–sodium nitrite melts: A Raman spectra study

Investigation on thermal performance of quinary nitrate/nitrite mixed molten salts with low melting point for thermal energy storage

Preparation and Thermal Properties of Quaternary Mixed Nitrate with Low Melting Point

Thermophysical Properties' Enhancement of LiNO3-NaNO3-KNO3-NaNO2-KNO2 Mixed with SiO2/MgO Nanoparticles

Probing Thermal Decomposition Mechanism of Molten Nitrite/nitrates Salt by Time of Flight Mass Spectrometry

Thermal Characterization of [C2Im][NO3] and Multivalent Nitrate Salts Mixtures

Investigation on thermal performance of eutectic binary nitrate-carbonate molten salt under thermal shock condition

Thermal Decomposition Paths of Calcium Nitrate Tetrahydrate and Calcium Nitrite

Characterization and Heat Transfer Performance of Quarternary Nitrate Based Molten Salts

Experimental Study on the Thermal Stability of a New Molten Salt with Low Melting Point for Thermal Energy Storage Applications

Effect of pre-heating on thermal stability of molten nitrate salt

Study on Preparation and Thermal Properties of Sodium Nitrate/silica Composite As Shape-Stabilized Phase Change Material

Enhancing phase change thermal properties of unitary and binary nitrates by carbon/ceramic-based nanoparticles via interfacial effect

Experimental Study On Thermal Performance Of Mixed Nitrate And Carbonate Salts

Design of new molten salt thermal energy storage material for solar thermal power plant

Thermal stability assessment of nitrocellulose by using multiple calorimetric techniques and advanced thermokinetics

PREPARATION AND EXPERIMENTAL STUDY OF BINARY NITRATE SALTS

Experimental and theoretical studies on stability of new stabilizers for N-methyl-P-nitroaniline derivative in CMDB propellants

The Impact of Binary Salt Blends’ Composition on Their Thermophysical Properties for Innovative Heat Storage Materials

The effect of oxygen on the thermal stability and decomposition behaviours of 1,3-dimethylimidazolium nitrate for application using STA, ARC and FTIR

Nitrate based nanocomposite thermal storage materials: Understanding the enhancement of thermophysical properties in thermal energy storage