Abstract:Polymers are frequently considered as a candidate material for heavy duty tribological applications. Standard tribological testing for such applications may result in unrealistic tribological properties in terms of wear mechanism, transfer film formation and friction coefficient etc. Thus the present research aims to explore the tribological behaviour of currently available neat polymers under heavy duty loading condition. In this background, nine different polymers (PAI, PEI, PC, PPSU, PA6, PET, PPS, PVDF, and UHMWPE) of amorphous and semi-crystalline groups were chosen from engineering and high performance grades. Large scale reciprocating sliding wear tests with 50×50mm contact area were used. Considering heavy duty loading condition, the operational parameter were idealised at 10kN normal force and 50mm/s sliding speed. From the test results the polymers are classified into three groups based on the wear mechanisms and the transfer layer characteristics observed from the counterface. Group 1 did not persist any transfer layer (PC and PEI), whereas Group 2 materials (PET, PPS, PPSU and PAI) has lumpy discontinuous transfer layer and finally Group 3 materials evidenced uniform thin transfer layer. Clear signs of three body abrasion were evidenced in Group 1 material which is due to the absence of transfer layer and also from the large loose debris. Poor adhesion of inhomogeneous lumpy transfer layer in Group 2 showed an intermediate wear rate. Based on the wear and friction performance, the Group 3 materials (PVDF, UHMWPE and PA6) are proposed as the candidate materials for heavy duty tribological application. In regards to the transfer layer thickness and wear mechanisms at large scale testing, the present observations showed incomparable results with the literature. This research concludes that the revisit to polymer tribology at high load condition has indicated the difference in wear mechanism and the corresponding tribological characteristics in large scale testing. As a future work multi-scale testing is an absolute must for the complete understanding of tribological characteristics w.r.t a specific material.

Application of metal-polymer plain bearings for heavily loaded friction angles

Polymer composites based on aromatic polyamide and fillers of spherical and layered structure for friction units of high-performance equipment

PRACTICAL APPLICATIONS INVOLVING POLYMER-METAL FRICTION

Triboanalysis of Antifrictional Materials Based on Polyamides for Metal-Polymer Sliding Bearings

On the ability of polymers to self-lubrication in metal – polymer friction pairs

Estimation of tribotechnical parameters of composite polymer with metal filler

ANALYTICAL STUDY OF DURABILITY AND CONTACT CHARACTERISTICS OF METAL-POLYMER COMPOSITE SLIDING BEARINGS FOR MEANS OF TRANSPORT

Tribological Analysis of Engineering Plastics/Steel Friction Pairs

Resource testing of modified plain bearings for the aviation industry

Static friction of normal and reversed metal–polymer sliding pairs

Effect and performance analysis of different surface treatments on polymer-metal friction pairs

Solid polymer bearings in tribological applications

Efficiency of Antifriction Solid Lubricant Coatings for Metal–Polymer Friction Pairs

Regarding the Question of Calculation of Contact Pressure in Metal-Polymer Plain Bearings during Wear

FRICTION PROCESSES OF SELECTED POLYMERS SLIDING ON STEEL AND DURALUMIN IN A LUBRICANT ENVIRONMENT

Methods for increasing the wear resistance of heavy loaded metal-polymer tribosystems

Effect of the Thermal Conductivity of Mated Materials on the Wear Intensity of a Polymerpolymer Friction Pair

Revisiting polymer tribology for heavy duty application

Comparative Evaluation of the Tribological Properties of Polymer Materials with Similar Shore Hardness Working in Metal–Polymer Friction Systems

Tribological characteristics of polymer materials used for slide bearings

Mechanisms of transferring the matter in a friction process in a tribology system: polymeric composite-metal