Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Without the employment of new equipment, with units functioning at high levels of weights, sliding speeds and temperatures, the current growth of the sector is all but impossible. High levels of labour intensity have a detrimental impact on the dependability and durability of the product. Moving joints, which comprise friction units, frequently fail at the same time. It is vital to increase their dependability and durability. This can be accomplished by substituting more recent materials with higher-quality qualities for the friction pair materials. To create such materials, the researchers created an aromatic polyamide polymer that was filled with silicon- (silica gel, bentonite) and carbon-containing (technical carbon, graphite) components. It was determined that depending on their nature, structure and content in the polymer matrix, the addition of these fillers enables the reduction of the coefficient of friction and wear of the produced polymer composites by 1.5–2.5 and 20–40 times, respectively, during frictional interaction with steel. It was found that 10–15% by weight of the examined fillers in aromatic polyamide is the ideal concentration. It has been proven that polymer composites filled with layered materials (bentonite, graphite) perform better in terms of tribological qualities when in contact with steel than those filled with spherical elements (technical carbon, silica gel). The improvement of the tribological properties of the developed polymer composites in comparison to the original polymer was determined based on the microphotographs of steel surfaces and the study of their morphological (roughness) and physical (microhardness) properties. It was determined that the change in the friction nature was due to the creation of an antifriction coating on the metal friction surface from the products of tribochemical reactions occurring during friction.

Methods for increasing the wear resistance of heavy loaded metal-polymer tribosystems

Physicochemical Tribomechanics of Antifriction Materials Operating in Heavy-Loaded Friction Pairs in Active Lubricating Media

Wear resistance of nanostructured metal-polymer self-lubricating powder composites

Coefficient of mutual overlap in metal-polymer tribosystems

ACCELERATED TESTING OF MECHANICAL AND CHEMICAL EFFECT OF THE ENVIRONMENT ON WEAR RESISTANCE OF PARTS OF TRIBOCOUPLES UNDER COMPLEX DYNAMIC LOADING

Mechanisms of transferring the matter in a friction process in a tribology system: polymeric composite-metal

Polymer composites based on aromatic polyamide and fillers of spherical and layered structure for friction units of high-performance equipment

Research progress of surface modification and solid–liquid lubrication synergistic friction reduction and wear resistance

Metal-polymer cladding technology for metal friction surfaces

Effect of the Thermal Conductivity of Mated Materials on the Wear Intensity of a Polymerpolymer Friction Pair

PRACTICAL APPLICATIONS INVOLVING POLYMER-METAL FRICTION

A New Approach to Optimization of the Metal-Polymer Tribological Characteristics

Triboanalysis of Antifrictional Materials Based on Polyamides for Metal-Polymer Sliding Bearings

The analysis of ways to increase the durability of shut-off valves loaded elements

Basic approaches and requirements for the design of tribological polymer composite materials with high-modulus fillers

The Mechanism of Tribological Wear of Thermoplastic Materials

Latest progress on tribological properties of industrial materials

Study of the Friction and Wear Behavior of Metal/Polymer-Metal Multi-Material Configurations

Multilayer Coatings for Tribology: A Mini Review

Regularities of Wear of Metal-Polymer Friction Couples Under the Influence of Tribocurrents

Mitigating friction and wear by pre-designed or tribo-induced heterostructures: an overview