Abstract:An experimental and theoretical method of triboanalysis is proposed to characterize the antifriction properties of polyamides and composites based on them, used in self-lubricated metal-polymer sliding bearings. The indicators of wear resistance of the materials are determined experimentally. The generalized parameters of the mathematical model of wear used in the design of metal-polymer bearings are calculated. The dependences (diagrams) of wear resistance of unfilled polyamides PA6, PA66, and polyamide composites PA6 + 30GF, PA6 + 30CF, PA6 + MoS 2 , and PA6 + oil paired with steel 45 on specific friction force are obtained and a comparative assessment of the wear resistance is given. The influence of contact pressure on the friction coefficient is studied and a significant decrease in the latter with increasing contact pressure is shown. A decrease in the Vickers hardness and elastic modulus of the surface layer of the studied materials during wear is also established. It is more significant for unfilled polyamide PA66 (by 1.66 times), PA6 + 30CF (by 1.5 times), PA6 + MoS 2 (by 1.41 times), and less noticeable for polymer composites PA6 + 30GF and PA6 + oil by 1.21 and 1.09 times, respectively. The fact should be taken into account in tribological calculations of metal-polymer sliding bearings. The research results are presented in the form of diagrams, which allow one to compare the wear resistance of the investigative materials in a wide range of specific friction forces. Thus, the practical significance of the results lies in the possibility of their use in tribological engineering to predict the service life of metal-polymer plain bearings and validate the choice of antifriction materials for their manufacturing.

Regularities of Wear of Metal-Polymer Friction Couples Under the Influence of Tribocurrents

Mechanisms of transferring the matter in a friction process in a tribology system: polymeric composite-metal

ACCELERATED TESTING OF MECHANICAL AND CHEMICAL EFFECT OF THE ENVIRONMENT ON WEAR RESISTANCE OF PARTS OF TRIBOCOUPLES UNDER COMPLEX DYNAMIC LOADING

Coefficient of mutual overlap in metal-polymer tribosystems

Wear resistance of nanostructured metal-polymer self-lubricating powder composites

Methods for increasing the wear resistance of heavy loaded metal-polymer tribosystems

Friction and Wear of Asbestos-Free Brake Friction Materials

Electrokinetic Phenomena in Near Surface Layers of Metal Polymer Friction Elements

Coupled thermomechanical FE model of a railway disc brake for friction material wear calculations

Physicochemical Tribomechanics of Antifriction Materials Operating in Heavy-Loaded Friction Pairs in Active Lubricating Media

Tribological characteristics of polymer materials used for slide bearings

Tribological Performance of the Continuous Steel Fiber-reinforced Cu based Friction Material for Heavy-duty Braking Applications

Studies of Simultaneous Friction and Corrosive Processes in the Presence of Abrasive Particles

A Study of Tribological Phenomena in Friction Couple: Brake Composite Material—Steel

Efficiency of Antifriction Solid Lubricant Coatings for Metal–Polymer Friction Pairs

Impact of Operating Time on Selected Tribological Properties of the Friction Material in the Brake Pads of Passenger Cars

Experimental Investigation of the Tribological Behaviors of Carbon Fiber Reinforced Polymer Composites under Boundary Lubrication

On the ability of polymers to self-lubrication in metal – polymer friction pairs

Investigation of functional characteristics of composites used for brake pads

Triboanalysis of Antifrictional Materials Based on Polyamides for Metal-Polymer Sliding Bearings

Numerical modeling of heat generation process in a disk brake at three thermal contact conditions over an extended braking distance