Abstract:Quasi-solid state electrolyte is one of the promising options for next generation batteries due to its superiority on safety and electrochemistry performance. However, the trade-off between the electrolyte swelling ratio and mechanical property of the quasi-solid state electrolyte significantly influences the battery performance. Herein, we design a nonswelling, solvent-adaptive polymer gel composed of oleophobic zwitterion poly(3-(1-vinyl-3-imidazolio)-propanesulfonate) and oleophilic elastomer poly(2-methoxyethyl acrylate) segments to retain high battery performance without sacrificing the mechanical property in lithium batteries. The as-designed gel can not only uptake enough electrolyte for a high ionic conductivity of 1.78 mS cm–1 but also achieve excellent mechanical strength with compression stress at 90% strain (σ0.9) reaching 5.8 MPa after long time soaking for battery safety due to its nonswelling property in ester electrolyte. Moreover, the as-prepared zwitterionic gel is beneficial to electrolyte salt dissociation, which further enhances the ionic conductivity and transference number of batteries. Consequently, the gel electrolyte can cycle for more than 500 h under a high current density of 3 mA cm–2 on dendrite inhibition performance, and when assembled with LiFePO4 as a cathode, the battery demonstrates a reversible specific capacity as high as 70 mAh g–1 under a high current density of 5 C after 300 cycles. The rational designed solvophilic/solvophobic zwitterionic elastomers provide a guidance for engineering quasi-solid state electrolytes of different solvents with broad applications on flexible devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01064?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01064</a>.Molecular structures of PVMGE, VIPS, MEA, PEGDA and HHMP; Raman spectra characterizing the dissociation effect of PVIPS on LiTFSI; images of PV4M3GE before and after the compression; exhibition of the brittleness of PVIPS gel electrolyte; frequency dependencies and tensile test of PV1M1GE; ionic conductivity of the PVMGEs; temperature dependence of ionic conductivity of PV1M1GE; Li stripping/plating voltage profiles and cycling stability of lithium symmetric cells with liquid electrolyte; cycling stability of PMEA electrolyte for lithium symmetric battery; SEM images of lithium anode of lithium symmetric battery with liquid electrolyte and PMEA; LSV curve of lithium symmetric cells; rate performances and cycling performances of liquid electrolyte; CV profiles and cycle stability of LiFePO4/PV1M1GE/Li; and comparison of electrochemical performance for PV1M1GE with other electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01064/suppl_file/am1c01064_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effect of ionic liquid 1-ethyl-3-methylimidazolium hydrogen sulfate on zinc-ion dynamics in PEO/PVdF blend gel polymer electrolytes

Influence of 1-ethyl-3-methylimidazolium bis (trifluoromethyl sulfonyl) imide plasticization on zinc-ion conducting PEO/PVdF blend gel polymer electrolyte

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Dielectric and thermal features of zinc ion conducting gel polymer electrolytes (GPEs) containing PVC / PEMA blend and EMIMTFSI ionic liquid

Electrical conductivity and dielectric relaxation behaviour of PEO/PVdF-based solid polymer blend electrolytes for zinc battery applications

Investigations of Zinc Ion Dissociation in Gel Polymer Electrolytes Based on Poly(vinyl chloride) and Poly(ethyl methacrylate) Blend on the Addition of Two Different Ceramic Nanofillers

Enhanced Li+ and Mg2+ Diffusion at the Polymer–Ionic Liquid Interface within PVDF‐Based Ionogel Electrolytes for Batteries and Metal‐Ion Capacitors

Influence of the Ionic Liquid Type on the Gel Polymer Electrolytes Properties

Effect of ionic liquid on the properties of poly(vinylidene fluoride)-based gel polymer electrolytes

Effect of Methylsisesquioxane Filler on the Properties of Ionic Liquid Based Polymer Electrolyte

Effect of the progressive addition of 1-ethyl-3-methylimidazolium tetrafluoroborate as ionic liquid solvent for designing potassium ion conducting polymer gel electrolyte

Preparation of pectin biopolymer electrolyte for zinc-ion battery application

Effect of lithium hexafluorophosphate LiPF6 and 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [Bmim][TFSI] immobilized in poly(2-hydroxyethyl methacrylate) PHEMA

Effects of 1-hexyl-1-methylimidazolium iodide ionic liquid to poly(vinyl alcohol)–based solid polymer electrolyte

The effect of nitrogen-rich ionic liquid [EMIMDCA] on the electronic structure of solid polymer electrolyte (PEO-LiTFSI)

High electrochemical and mechanical performance of zinc conducting-based gel polymer electrolytes

Ionic Liquid-Softened Polymer Electrolyte for Anti-Drying Flexible Zinc Ion Batteries

Effect of polymer blending on the electrochemical properties of porous PVDF/PMMA membrane immobilized with organic solvent based liquid electrolyte

Ionic Liquid Boosted Conductivity of Biopolymer Gel Electrolyte

Decoupling of Mechanical Strength and Ionic Conductivity in Zwitterionic Elastomer Gel Electrolyte toward Safe Batteries

Effect EMIMCl on electrochemical properties based PMMA-PLA hybrid gel polymer electrolyte