Abstract:Gel polymer electrolyte films (GPEs) based on polyacrylonitrile (PAN) complexed with NaF salt and an Al2O3 nanofiller were prepared via solution cast method. Structural studies were performed to investigate the order of conductivity under the influence of salt and nanofillers. The prepared films were characterized using energy dispersive x-ray spectrometry (EDS) to determine the chemical composition in wt%. EDS studies reveal that PAN–NaF with Al2O3 ceramic filler decreases the degree of crystallinity with increasing concentration of the nanofiller. The UV–Vis spectrum was recorded by a Hewlett-Packard HP8452A diode array spectrometer. The structural effect of salt and nanoparticles on the conductivity was also confirmed by UV–Vis spectroscopy. The mechanical properties of the prepared polymer electrolytes were determined using a Universal Tensile Machine (Instron Model 5565, Canada) with a constant crosshead speed of 10 mm/min. The addition of nanoparticles increased both the modulus and the strength of the polymer nanocomposites. Both the tensile strength and Young’s modulus increased with increasing functionalized nanoparticle loading. The change in transition temperature caused by the incorporation of the Al2O3 nanofiller and plasticizer into the PAN+NaF complex was studied by differential scanning calorimetry (DSC) analysis. Additionally, DSC thermograms were recorded to measure the glass transition temperature and melting temperature of PAN-based electrolytes using a Mettler instrument. Conductivity studies were carried out for all the prepared polymer electrolytes to understand the conduction mechanism. The role of the ceramic phase is to reduce the melting temperature, which is ascertained from DSC. The sample containing PAN:NaF (70:30) exhibits the highest conductivity of 1.82 x 10−4 S cm−1 at room temperature (303 K) and 2.96 x 10−3 S cm−1 at 378 K. The polymer electrolytes considered in the present study exhibited an Arrhenius type of conduction. The polymer electrolyte containing 3 wt% Al2O3 nanofiller showed an ionic conductivity of 5.96 × 10−3 S cm−1. To determine transfer numbers, Wagner’s polarization method can be used. From these studies, it is observed that the conduction mechanism is predominantly due to ions. Using this (PAN–NaF– Al2O3) (70:30:3) electrolyte, a solid-state electrochemical cell was fabricated, and its discharge profiles were studied under a constant load of 100 kΩ. Finally, several cell profiles associated with this cell were evaluated and reported.

Investigations of Zinc Ion Dissociation in Gel Polymer Electrolytes Based on Poly(vinyl chloride) and Poly(ethyl methacrylate) Blend on the Addition of Two Different Ceramic Nanofillers

Dielectric and thermal features of zinc ion conducting gel polymer electrolytes (GPEs) containing PVC / PEMA blend and EMIMTFSI ionic liquid

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Influence of 1-ethyl-3-methylimidazolium bis (trifluoromethyl sulfonyl) imide plasticization on zinc-ion conducting PEO/PVdF blend gel polymer electrolyte

High electrochemical and mechanical performance of zinc conducting-based gel polymer electrolytes

Structural, Thermal, Electrical and Electrochemical Studies of Polyvinyl Alcohol (PVA) Assisted BiFeO3 Embedded Novel Gel-Based Nanocomposite Utilizations in Polymer Electrolytes

Comparative investigations on polymer gel electrolytes comprising triflate salts of Li, Na, Mg in TEGDME solvent and PVdF-HFP/PVP blend matrix

Preparation and Characterization of Novel Crosslinked Poly[glycidyl Methacrylate–poly(ethylene Glycol) Methyl Ether Methacrylate] As Gel Polymer Electrolytes

CuInS 2 Nanospheres and Nanowhiskers Enhancing the Electrochemical Properties of Sodium-Ion-Conducting Gel Polymer Electrolytes

Electrical conductivity and dielectric relaxation behaviour of PEO/PVdF-based solid polymer blend electrolytes for zinc battery applications

Novel Nanocomposite Of Poly(Acrylonitrile-Co-Glycidyl Methacrylate) Crosslinked With Jeffamine-Functionalized Multiwalled Carbon Nanotubes As Gel Polymer Electrolytes

Crosslinked poly(acrylonitrile–glycidyl methacrylate) as a novel gel polymer electrolyte

Zinc oxide nanofiller-based composite polymer gel electrolyte for application in EDLCs

Effect of ionic liquid 1-ethyl-3-methylimidazolium hydrogen sulfate on zinc-ion dynamics in PEO/PVdF blend gel polymer electrolytes

A sodium ion conducting gel polymer electrolyte with counterbalance between 1-ethyl-3-methylimidazolium tetrafluoroborate and tetra ethylene glycol dimethyl ether for electrochemical applications

Effect of ZnO Nanofiller on Structural and Electrochemical Performance Improvement of Solid Polymer Electrolytes Based on Polyvinyl Alcohol-Cellulose Acetate-Potassium Carbonate Composites

Influence of the Ionic Liquid Type on the Gel Polymer Electrolytes Properties

Studies on potassium-ion conducting gel polymer electrolytes containing poly(vinylidene fluoride-hexafluoropropylene) polymer, potassium permanganate salt added with different plasticizers

Structural, Optical, and Electrical Studies of PAN-Based Gel Polymer Electrolytes for Solid-State Battery Applications

Fabrication of BaTiO3 ceramic filler incorporated PVC-PEMA based blend nanocomposite gel polymer electrolytes for Li ion battery applications

Studies of plastic crystal gel polymer electrolytes based on poly(vinylidene chloride-co-acrylonitrile)